Staff Directory


Anis Nurashikin Bt. Nordin

Academic Qualification

  • Ph.D in Computer Engineering - Doctor of Philosophy, George Washington University
  • Master in Computer Engineering - Masters Degree, George Washington University
  • Bachelor of Engineering in Electronics - Bachelor Degree, International Islamic University Malaysia

Anis Nurashikin Bt. Nordin (Prof. Dr.)

Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING

Other's position:

Deputy Director, Research Management Centre


anisnn@iium.edu.my
4478


Expert Profile


Anis Nurashikin Nordin, a former student of the Bukit Bintang Girls School, started her academic career as an Assistant Lecturer in International Islamic University Malaysia in 1999, upon completion of her Bachelors degree in Computer and Information Engineering in the same year. She obtained both her Master of Science and Doctor of Science in Computer Engineering from the George Washington University, Washington D.C. in 2002 and 2008 respectively.
Her field of specialization, both for her Masters and doctorate degree was in Microelectronics and VLSI. She was appointed as an Associate Professor in the Department of Electrical and Computer Engineering, in 2012. She also served as the Head of Research in the Kulliyah of Engineering from 2011 till 2013.
She is a senior member of Institute of Electrical and Electronics Engineers. She is passionate about her research and her main research interests are in the areas of biosensors, microfluidics, lab-on-chip devices, Analog VLSI, RF-MEMS, surface acoustic wave resonators and oscillators in particular. She has won the IIUM Quality Day Most Outstanding Researcher Award in 2014 (Science and Technology) and IIUM Quality Day Most Promising Researcher Award in 2010 (Science and Technology).
She also won numerous medals both internationally and locally for her research in developing personalized sensors for cancer chemotherapeutics. She has also been invited as a visiting scholar in renowned universities all over the world, namely the City College of New York, USA (2010 & 2015), Linkoping University, Sweden (2013), University of Twente, Holland (2014) and Griffith University, Australia (2011). Dr. Anis has also served as a technical consultant for UNITEN and Silterra (M) Sdn. Bhd.


Area of Specialisation


  • Engineering Tech ~ Engineering And Technology ~ Electrical and Electronic Engineering ~ Other Electrical and Electronic Engineering n.e.c. - Wafer Reliability
  • Natural Science ~ Mathematical Sciences ~ Mathematics and Statistics for ICT and Industries ~ Circuits and Networks - Surface Acoustic Wave Resonators and Filters
  • Engineering Tech ~ Engineering And Technology ~ Electrical and Electronic Engineering ~ Robotics and Mechatronics - Analog and Mixed Signal Design
  • Engineering Tech ~ Engineering And Technology ~ Electrical and Electronic Engineering ~ Microelectronics - MEMS and VLSI


Professional Membership


  • 1999 - 2012: Member of Profesional Body / Association, Institute of Electrical and Electronics Engineers (IEEE)
  • 2010 - 2012: Member of Profesional Body / Association, Board of Engineers Malaysia
  • 2012: Member of Profesional Body / Association: (Member), Institute of Engineers Malaysia
  • 2015: Member of Profesional Body / Association: (Member), Institute of Engineering Technology


Teaching Responsibilities


ADVANCED TOPICS IN VLSI DESIGN 2015/2016 2014/2015 2012/2013 2011/2012 2010/2011 2009/2010
COMPUTER AND INFORMATION ENG. LAB II 2010/2011 2009/2010 2008/2009
ELECTRONICS 2016/2017 2015/2016 2012/2013 2011/2012 2010/2011 2009/2010 2008/2009 2007/2008
ENGINEERING LAB I 2008/2009
ENGINEERING LAB II 2014/2015 2010/2011 2009/2010 2008/2009
FINAL YEAR PROJECT 1 2019/2020 2018/2019
FINAL YEAR PROJECT I 2019/2020
FINAL YEAR PROJECT II 2023/2024 2022/2023 2021/2022
INTEGRATED DESIGN PROJECT 2023/2024 2022/2023 2021/2022 2020/2021
INTEGRATRED DESIGN PROJECT 2023/2024
MICROELECTROMECHANICAL SENSORS 2014/2015
MICROELECTROMECHANICAL SENSORS, ACTUATORS AND SYSTEMS 2011/2012
MICROELECTRONIC CIRCUITS 2002/2003
PROJECT I 2018/2019
VLSI DESIGN 2023/2024 2021/2022 2020/2021 2019/2020 2018/2019 2016/2017 2015/2016 2014/2015
VLSI MODELING TECHNIQUES 2012/2013 2010/2011


Supervision


Fabrication And Characterization Of Activated Carbon/Graphene Supercapacitor As An Energy Storage Device And Its Equivalent Circuit Model.
Ph.D Completed 2022 Co-supervisor
Integrated Electrochemical And Mass Biosensor For Early Dengue Detection.
Ph.D Completed 2020 Main Supervisor
Zinc Oxide And Aluminium Nitride Cmos-Mems Surface Acoustic Wave Resonator For Rf Applications.
Ph.D Completed 2016 Main Supervisor
Design And Simulation Of Low Power Cmos Oscillator For Mems Saw Resonator.
Ph.D Completed 2016 Main Supervisor
Design And Characterization Of Wearable Zinc-Oxide Piezoelectric Nanogenerator On Textile.
Ph.D In Progress Main Supervisor
Design And Development Of Parallel Biosensing System For Personalized Chemotherapy Treatment.
Ph.D In Progress Main Supervisor
Polymer Coated Acoustic Wave Sensor For Volatile Organic Compounds Sensing Application.
Ph.D In Progress Co-supervisor
Full Hand Pose Recognition Under Dexterous Articulation In Daily Activities For Tele-Rehabilitation.
Ph.D In Progress Co-supervisor
Driver Drowsiness Level Measurement Using Electrocardiogram Signal For Improving Road Safety.
Ph.D In Progress Co-supervisor
Fabrication, Characterization And Application Of Molecularly Imprinted Polymer (Mip) Sensor For The Detection Of Sulfamethoxazole (Smx) In Milk.
Master Completed 2023 Co-supervisor
Establishment And Characterization Of Human Primary Lung Cancer Cells From Population In Pahang, Malaysia .
Master Completed 2022 Co-supervisor
Low-Cost And Rapid Prototyping Of Electrochemical Microfluidic Biosensors.
Master Completed 2021 Main Supervisor
Stepped Impedance Interdigital Capacitive Rf Sensor For Continuos Blood Glucose Monitoring .
Master Completed 2021 Main Supervisor
Development Of A Stretchable Strain Sensor For Detection Of Facial Expressions.
Master Completed 2021 Main Supervisor
Machine Learning-Based Facial Expression Recognition Using Stretchable Strain Sensors For Rehabilitation System.
Master Completed 2021 Co-supervisor
High Performance Adaptive Pid Controller For Brushless Dc Motor .
Master Completed 2021 Co-supervisor
Development Of Flexible Piezoelectric Energy Harvester For Wearable Device .
Master Completed 2020 Main Supervisor
Development Of Screen-Printed Nickel-Zinc And Silver-Zinc Batteries .
Master Completed 2020 Main Supervisor
Development Of Surface Acoustic Wave Device Based On Quartz.
Master Completed 2019 Co-supervisor
Wireless Power Transmission-Exploring Source To Load Inductive Link Performance Under Resonance And Varying Load Conditions.
Master Completed 2017 Co-supervisor
Effect Of Single Event Upset On 6t And 12t Static Random Access Memory For Different Cmos Technologies.
Master Completed 2017 Co-supervisor
Development Of Screen-Printed Impedance Biosensor For Characterization Of Cancer Cells.
Master Completed 2016 Main Supervisor
Multichannel Bio-Impedance Spectroscopy System On Fpga .
Master Completed 2015 Main Supervisor
Design And Implementation Of Pic-Based Inductive Human Body Postures Recognition System.
Master Completed 2015 Main Supervisor
Cellular Impedance Biosensor For Drug Testing On Hct-116 Cancer Cells .
Master Completed 2015 Co-supervisor
Design And Modelling Of Integrated Rf Mems Beam Resonators.
Master Completed 2014 Main Supervisor
Development And Characterization Of Integrated Surface Acoustic Wave Resonator On Cmos.
Master Completed 2014 Main Supervisor
Design And Analysis Of Rf-Cmos Switch For Reconfigurable Rf Front End.
Master Completed 2014 Main Supervisor
Design And Modeling Of A Clock Data Recovery (Cdr) Circut.
Master Completed 2013 Main Supervisor
Simulation And Modelling Of A Saw Based Resonator For Mass And Impedance Biosensing.
Master Completed 2013 Main Supervisor
Design And Simulation Of Mems Saw Resonator In Cmos Technology.
Master Completed 2013 Main Supervisor
Optimal Piezoelectric Shape And Configuration For Vibration Energy Scavenging System.
Master Completed 2013 Co-supervisor
Development Of Mems Piezoelectric Energy Harvesting Devices For Wireless Condition Monitoring.
Master Completed 2012 Main Supervisor
Modelling Of The Reliability Baseline For Process Control Monitoring Of Kerf Structures.
Master Completed 2012 Main Supervisor
Low Dark Count Rate So Spad (Silicon Single-Photon Avalanche Diode) For Use As Single Photon Detector In Quantum Key Distribution (Qkd) Data Security.
Master Completed 2012 Co-supervisor
The Development Of Power Control Module In Rfid Reader Circuit Design.
Master Completed 2010 Co-supervisor
Development Of A Smart Glove For Hand Gesture Detection.
Master In Progress Main Supervisor
Hardware Design Of Portable Potentiostat For On-Site Covid-19 Detection.
Master In Progress Main Supervisor
Design Of Potentiostat And Fluidic Chamber For Biosensing Application.
Master In Progress Main Supervisor
Zno Nanorod For Wearable Textile Energy Harvester Application.
Master In Progress Co-supervisor
Intrusion Detection System Using Machine Learning And Deep Learning Algorithms For Nacots System.
Master In Progress Co-supervisor
Development Of Fluidic System For Electrochemical-Based Covid-19 Biosensor.
Master In Progress Co-supervisor
Blockchain-Enabled Iot For Real-Time Carbon Offset Reporting: Design, Implementation, And Performance Evaluation.
Master In Progress Co-supervisor
Enhanced Nicotine Detection Using Electrochemical-Based Screen-Printed Electrodes Modified With Laser-Induced Graphene.
Master In Progress Co-supervisor


Research Projects


Completed
2020 - 2022 Enhanced Nicotine Detection Using Electrochemical-based Screen-printed Carbon Electrodes Modified with Graphene-Based Materials
2019 - 2019 Training of DIY Conductive Inkjet Printing for MEMs electrodes
2019 - 2022 A Highly Sensitive Sensing Device using Stretchable Circuit for Facial Expression Detection
2019 - 2023 Portable and precise electrochemical-quartz crystal microbalance diagnostic system for early detection of dengue
2019 - 2020 SURVEY ON PUBLIC AWARENESS OF SCIENCE, TECHNOLOGY AND INNOVATION MALAYSIA 2019
2019 - 2019 Low Cost Approaches to Printable Electronics
2019 - 2023 Investigating the Detection of Antibiotic Residual in Dairy Product using Printed Electrodes
2018 - 2020 Two-Dimensional Stretchable Strain for Facial Expression-Driven Rehabilitation System (AOARD GRANT)
2018 - 2022 Numerical formulation and physical investigation of molecules motion for precise controlling of liquid flow on paper-based devices.
2018 - 2022 Verifying the Mechanical Power Transformation Effectiveness of Brushless DC Motor and its Characteristics
2018 - 2022 Investigation on performance of Electromical Supercapacitor with 3D graphene-based electrodes (AOARD GRANT)
2018 - 2022 Development of Printed Power Sources on Flexible Substrates
2017 - 2020 Development of Flexible Piezoelectric Energy Harvester for Wearable Devices and Development of Printable, Flexible, Rechargeable Zinc Batteries for Powered Smart Card Application
2017 - 2020 Fundamental study of blood glucose solution models using a novel stepped impedance RF sensor for improved continuous monitoring of diabetic patients
2017 - 2020 Investigation of Electrosprayed Carbon-based Nanomaterials as Electrodes in Energy Storage Devices for Improved Microbial Fuel Cell
2017 - 2020 Theoretical modeling of lung cancer biomarkers in exhaled breath using silicon compatible electroacoustic microsensors
2016 - A Qualitative Study on the Novel use of Electrical Stimulation for the Prevention of Pressure Ulcers due to Immobility
2016 - 2018 Development of A Stretchable Tactile Distribution Sensor
2016 - 2019 Development of a Parallel biosensing system for personalized and pointof-care chemotherapy treatment
2016 - 2019 An Investigation on the Piezoelectric Characteristics of Thin Film for Flexible Surface Acoustic Wave Ultraviolet Microsensor
2015 - 2018 Novel Theoretical Model of an electrochemical nanobiosensor for rapid detection of dengue
2015 - 2018 An Efficient Algorithm on Lossless Audio Compression using Optimized Linear Predictor and Entropy Coding for Multichannel Quranic Audio Recitation
2015 - 2018 Novel model of leakage current mechanisms in radiation hard Silicon Carbide Schottky Diodes
2014 - 2019 "Dengue-Screening" - Electromechanical Micro-total Analysis System (?TAS) for Sensitive and Rapic Detection of Dengue Fever
2014 - 2017 Design and Development of Chipless Ultra Wideband RFID System
2014 - 2016 Novel Method to Synthesize Polymeric Biphasic Micro-Particles Using Droplet Microfluidic Lab on a Chip
2013 - 2017 Novel Modelling Of A Bio-Analysis Platform (Biochip) With The Integrated Dielectrophoresis (Dep) And Magnetophoresis (Map) Forces For Particles Manipulations.
2013 - 2017 Exploration on CMOS Capacitance Based Structural Health Monitoring by Energy Harvested Wireless Sensor Networks
2013 - 2015 Analysis And Characterization Of Chipless Rfid Tag For Investigating The Scope Of Uses In Malaysia
2013 - 2016 Hierarchical Horizontally Cross-tiered Scheduling for Downlink in LTE-Advanced Mobile Telecommunication System
2013 - 2015 Optimised Multicast Support for Mobile Sender in Wireless Mesh Networks
2012 - 2015 Proof of Concept for a Novel Real Time, Hardware base Cancer Chemotherapeutics Kit Using MEMS Biosensor
2012 - 2015 Design and development of MEMS Acoustic Energy Harvester
2012 - 2014 Design and Development of Advanced Techniques for Brain Computer Interface using Multi-Channel Electroencephalography (EEG) Signal
2012 - 2015 Measurement of EMG Signal for the Correct Identification of Human Postures
2012 - 2015 A Development of a Top Down Silicon Nanoware into Field Effect Transistor
2012 - 2015 Hardware Implementation of a Novel Impedance Spectroscopy System for Cancer Cell Studies
2012 - 2015 Design and Development of Autonomous Assistive Devices using EMG Signal for Functional Rehabiliation
2012 - 2014 RU 2011: A Study of Major Muscles Activity During Performance of Salah (Prayer)
2012 - 2014 Design and Fabricate of a Low-Voltage RF-MEMS Switch in Standard CMOS Technology
2011 - 2012 Modelling and simulation of evanescent field characteristic of polymer waveguide structure for optical biosensor
2011 - 2013 Hardware Prototyping of Photoplethysmography Based Cardiac Monitoring Technique for Devising a Practical Remote Health Monitor
2011 - 2015 Novel Vertically Integrated Nano GHz Surface Acoustic Wave Oscillator for RF Applications
2009 - 2012 Development of an Emergency Medical Care System for Cardiac Telemedicine Monitoring
2009 - 2011 Design and analysis of analog to digital Conversion circuit using Multi-Valued Logic
2009 - 2012 Development of Low-Loss CMOS Based RF Surface Acoustic Wave Resonator
2009 - 2012 Modeling of a Novel Integrated Surface Acoustic Wave Resonator
2009 - 2013 MULTI-GB/S HIGH SPEED SERIAL TRANSCEIVER (HSST) SUITABLE AS PHYSICAL LAYER FOR PCIE 2.0, SATA 3.0 ANS USB 3.0 SUPPER SPEED APPLICATIONS
2008 - 2011 Temperature Stabilization Methods for Surface Acoustic Wave Resonators
2008 - 2011 Temperature Stabilization Methods for Surface Acoustic Wave Resonators
2008 - 2010 Design and Development of a novel MEMS bio-sensor for real-time study of bone deformation
2008 - 2011 Novel Theoretical Model of a MEMS Biosensor for Real Time Study of the Cell Adhesion Process
2008 - 2010 Design and Development of Novel MEMS bio-sensor for real-time study of Bone Deformation
On-Going
2023 - Present Biocompatibility and Stretchability of Strain Sensors
2022 - Present Robust Analysis of Enhanced Photocurrent of Fe3O4/TiO2 for Photoelectrochemical Cell (PEC) Impedimetric Detection
2022 - Present Expanding Project of the First South East Asian Frozen Zoo at IIUM for Endangered Species in Malaysia
2022 - Present Nanosystem for Covid-19 DNA/Antibodies On The Spot Test (NACOTS) (CV02211032)
2021 - Present Design, Modeling and Characterization of Zinc-oxide piezoelectric nanogenerator on textile
2021 - Present Hydrophilic study of Carbon Nanotubes-Chitosan hybrid as functional material for Volatile Organic Compounds (VOCs) Detection
2021 - Present Stretchable chitosan-foliated graphite biocomposite as piezoresistive functional material towards enhanced strain sensing response
2021 - Present Enhanced Peak Current in Nicotine Detection using Electrochemical-based Screen Printed Electrodes Modified with Chitosan-Reduced Graphene Oxide Nanocomposite
2021 - Present Stretchable Strain Sensor for Full Hand Pose Recognition Under Dexterous Articulation in Daily Activities for Tele-rehabilitation
2021 - Present Enhanced Performance of Stretchable Body Coupled Antenna with High Permittivity Barium Titanate - Silicone Elastomer Composite for Biomedical Microwave Sensing and Imaging applications
2020 - Present Design and Development of Stretchable Sensors for Facial Expressions
2020 - Present Design and Development of Cytosensor for Personalized Chemotherapy Treatment
2020 - Present Design and Development of Integrated QCM and EIS Dengue Hybrid Biosensor
2020 - Present Quantitative Analysis of Photogenerated Charge under UV-irradiation of Fe3O4/TiO2 in Photoelectrochemical Cell
2020 - Present DESIGN AND DEVELOPMENT OF FLEXIBLE MILIMETER WAVE ANTENNA FOR RF ENERGY HARVESTER
2020 - Present Investigation of a Hybrid Piezoelectric and Radio Frequency (RF) Energy Harvester using Chitosan based Piezoelectric Thin Film for Self-Powered Health Care Wireless Sensors Network (HC-WSN)
2020 - Present DESIGN AND DEVELOPMENT OF STRECTHABLE ANTENNA FOR MSI APPLICATIONS
2020 - Present Design and Development of Screen Printed Potentiostat for Dengue Biosensor
2020 - Present Design and Development of Screen Printed Carbon Electrodes (SPCEs) For Nicotine Sensor
2019 - Present Microfabrication of Microfluidic Channel that Mimic Blood Vessel in the Hand (IIUM - University of Limoges (France) Joint Collaboration Programme)
2018 - Present Interdigitated Electrode Patterning using Standard Photolithography and Wet Etching for Surface Acoustic Wave Sensor Based on ST Cut Quartz for Breath Analysis (IIUM - University of Limoges (France) Joint Collaboration Programme)
2018 - Present Associating Electrocardiogram Signal with Driver Drowsiness Level in the Effort to Improve Road Safety
2018 - Present A New Biometrics Authentication Method Based on Fingertips Epidermis Layer Thickness Measurement
2018 - Present IIUM-UNIVERSITY OF LIMOGES(FRANCE) JOINT COLLABORATION PROGRAMME
2018 - Present Development of Continuous-time Non-invasive Glucose Sensing System
2018 - Present IIUM-UNIVERSITY OF LIMOGES (FRANCE) JOINT COLLABORATION PROGRAMME
2016 - Present Magnetic Blood Cells Microseparator for Seggeregating and Harvesting of Single Cell on Lab on Chip Platform
2009 - Present VSLI and MEMS Research Unit
2006 - Present Bio-Process and Molecular Engineering Research Unit (BPMERU)
- IIUM-University of Limoges (France) Joint Collaboration Programme
- RF MEMS/CMOS Device/ Circuit Modeling and Simulation
- RF-MEMS/CMOS-Device/Circuit Modeling and Simulation
- Energy Harvester Device for Wireless Vibration Condition Monitoring


Award & Recognition


14 Oct, 2015 Gold Prize - EUWIIN International
29 Oct, 2014 Silver Medal for Silicon Based Acoustic Wave Resonators - British Invention Show, London International
29 Oct, 2014 Silver Medal for MicroFluidics Lab-On-A-Chip - British Invention Show, London International
18 Jul, 2014 Outstanding Researcher Award (University) - IIUM University
22 Feb, 2014 Gold Medal for Bioimpedance Spectroscopy System for Characterization of Cancer Cells - Malaysia Technology Expo 2014 National
06 Nov, 2013 Gold Medal - International Trade Fair Nuremberg, Germany International
06 Nov, 2013 Bronze Medal for CMOS Surface Acoustic Wave Resonators - International Trade Fair Nuremberg, Germany International
09 Mar, 2010 Promising Researcher Award - IIUM University


Publications


Article

2023 Clinical performance of reverse transcription loop mediated isothermal amplification COVID-19 assay on gold- nanoparticle-modified screen-printed Carbon Electrode using differential pulse voltammetry. Sensors and Materials, 35 (10) pp. 4731-4750
2023 Development and evaluation of a high-performance electrochemical potentiostat-based desktop application for rapid SARS-CoV-2 testing. Indonesian Journal of Electrical Engineering and Informatics (IJEEI), 11 (2) pp. 349-365
2023 Gold nanoparticle deposited on screen-printed carbon electrode for electrochemical detection of nicotine in e-cigarette. Malaysian Journal of Chemistry, 25 (2) pp. 1-12
2023 Recent applications of molecularly imprinted polymers (MIPs) on screen-printed electrodes for pesticide detection. Journal of Electrochemical Science and Technology, 14 (1) pp. 1-14
2022 A review on the contamination of SARS-CoV-2 in water bodies: transmission route, virus recovery and recent biosensor detection techniques. Sensing and Bio-Sensing Research, 36 () pp.
2022 Application of real‑time cell analysis biosensor technology for drug cytotoxicity studies in primary lung cancer cells. Biomedical Materials & Devices, () pp. 1-12
2022 Flexible, Piezoelectric Aluminum-Doped Zinc Oxide Energy Harvesters with printed electrodes for wearable applications. International Journal of Sensors Wireless Communications and Control, 12 (1) pp. 48-68
2022 Low-cost and rapid prototyping of integrated electrochemical microfluidic platforms using consumer-grade off-the-shelf tools and materials. Lab on a Chip, 22 (9) pp. 1779-1792
2022 Mechanical durability of screen-printed flexible silver traces for wearable devices. Sensing and Bio-Sensing Research, 38 () pp. 1-7
2022 mmWave four-element mimo antenna for future 5G systems. Applied Sciences, 12 (9) pp. 1-12
2022 Performance analysis of optimized screen-printed electrodes for electrochemical sensing. International Journal of Integrated Engineering, 14 (3) pp. 250-261
2022 Portable electrochemical biosensors based on microcontrollers for detection of viruses: a review. Biosensors, 12 (8) pp. 1-21
2022 Portable electrochemical biosensors based on microcontrollers for detection of viruses: a review. Biosensors, 12 (8) pp.
2022 Smart android based home automation system using internet of things (IoT). Sustainability, 14 (17) pp. 1-17
2022 Systematic review study on application of Ion Imprinted polymer (IIP) in heavy metals detection. International Journal of Environmental Analytical Chemistry, () pp. 1-26
2022 Ultra-wideband pentagonal fractal antenna with stable radiation characteristics for microwave imaging applications. Electronics, 11 (13) pp. 1-11
2021 Advanced vapour sensing materials: existing and latent to acoustic wave sensors for VOCs detection as the potential exhaled breath biomarkers for lung cancer. Sensors and Actuators A: Physical, 329 (112792) pp.
2021 Effect of chitosan dissolved in different acetic acid concentration towards VOC sensing performance of quartz crystal microbalance overlay with chitosan. Materials Letters, 291 () pp. 1-4
2021 Fabrication and characterization of printed zinc batteries. Bulletin of Electrical Engineering and Informatics, 10 (3) pp. 1173-1182
2021 Impedance spectroscopy of adherent mammalian cell culture for biochemical applications: a review. IEEE Sensors Journal, 21 (5) pp. 5612-5627
2021 Screen-printed nickel–zinc batteries: a review of additive manufacturing and evaluation methods. 3D Printing and Additive Manufacturing, 8 (3) pp. 176-192
2021 Supercapacitor performance with activated carbon and graphene nanoplatelets composite electrodes, and insights from the equivalent circuit model. Carbon Trends, 5 () pp. 1-13
2020 An estimation of the coupling coefficient of the series inductive resonant wireless power transfer coils. Journal of Advanced Manufacturing Technology, 14 (1) pp.
2020 Control BLDC Motor Speed using PID Controller. International Journal of Advanced Computer Science and Applications, 11 (3) pp. 477-481
2020 Design and dimensional analysis of interdigital sensor for blood glucose measurement through non-invasive method. Journal of Advanced Manufacturing Technology, 14 (1) pp. 1-9
2020 Development of low cost screen-printed piezoresistive strain sensor for facial expressions recognition systems. Microelectronic Engineering, 234 () pp.
2020 Integrated multichannel electrochemical–quartz crystal microbalance sensors for liquid sensing. IEEE Access, 8 () pp. 3668-3676
2020 MEMS biosensor for monitoring water toxicity based on quartz crystal microbalance. Biointerphases, 15 (2) pp. 1-3
2020 Modeling and performance analysis of an adaptive PID speed controller for the BLDC Motor. International Journal of Advanced Computer Science and Applications (IJACSA), 11 (7) pp. 272-276
2020 Non-invasive glucose monitoring devices: a review. Bulletin of Electrical Engineering and Informatics, 9 (6) pp. 2609-2618
2020 Regenerating Muslim inventors – the present future. Ulum Islamiyyah: The Malaysian Journal of Islamic Sciences, 31 (August) pp. 1-18
2020 Review on strain sensors for detection of human facial expressions recognition systems. International Journal of Nanoelectronics and Materials, 13 (3) pp. 445-472
2020 The load reliant power transfer of the series-to-series inductive resonant wireless power transfer. Journal of Advanced Manufacturing Technology, 14 (1) pp.
2019 Application of Taguchi signal to noise ratio design method to ZnO thin film CMOS SAW resonators. IEEE Access, 7 () pp. 27993-28000
2019 Modeling and development of radio frequency planar interdigital electrode sensors. Bulletin of Electrical Engineering and Informatics, 8 (3) pp. 985-993
2019 The load reliant power transfer of the series-to-series inductive resonant wireless power transfer. Test Engineering and Management, 81 (November-December) pp. 5702-5708
2018 A novel design of a low-voltage low-loss T-match RF-MEMS capacitive switch. Microsystem Technologies, 24 (1) pp. 561-574
2018 A proposed resistance-to-time converter with switching impulse calibrators for application in resistive bridge sensors. Indonesian Journal of Electrical Engineering and Computer Science, 11 (1) pp. 47-50
2018 Design and analysis of a boosted pierce oscillator using MEMS SAW resonators. Microsystems Technologies, 24 (1) pp. 587-594
2018 Modeling and development of screen-printed impedance biosensor for cytotoxicity studies of lung carcinoma cells. Medical & Biological Engineering & Computing, 56 (1) pp. 173-181
2018 Recent trends in dengue detection methods using biosensors. IIUM Engineering Journal, 19 (2) pp. 134-153
2018 The impact of scaling on single event upset in 6T and 12T SRAMs from 130 to 22 nm CMOS technology. Radiation Effects and Defects in Solids, 173 (11-12) pp. 1090-1104
2018 Verification of quartz crystal microbalance array using vector network analyzer and openQCM. Indonesian Journal of Electrical Engineering and Computer Science, 10 (1) pp. 84-93
2017 A study on controllable aluminium doped zinc oxide patterning by chemical etching for MEMS application. Microsystems Technologies, 23 (9) pp. 3851-3862
2017 Content cytotoxicity studies of colorectal carcinoma cells using printed impedance sensors. Bulletin of Electrical Engineering and Informatics, 6 (4) pp. 317-326
2017 Design of a reconfigurable, modular and multi-channel bioimpedance spectroscopy system. Indonesian Journal of Electrical Engineering and Computer Science, 8 (2) pp. 428-440
2017 Development of photo forensics algorithm by detecting photoshop manipulation using error level analysis. Indonesian Journal of Electrical Engineering and Computer Science, 7 (1) pp. 131-137
2017 Enhanced piezoelectric properties of aluminium doped zinc oxide thin film for surface acoustic wave resonators on a CMOS platform. Journal of Materials Science: Materials in Electronics, 28 (12) pp. 9132-9138
2017 Flexible and stretchable circuits for smart wearables. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-8) pp. 117-122
2017 Highly sensitive Escherichia coli shear horizontal surface acoustic wave biosensor with silicon dioxide nanostructures. Biosensors and Bioelectronics, 93 () pp. 146-154
2017 Microfluidic concentration gradient for toxicity studies of lung carcinoma cells. Procedia Technology, 27 () pp. 153-154
2017 Prototype design of smart home system using internet of things. Indonesian Journal of Electrical Engineering and Computer Science, 7 (1) pp. 107-115
2017 Screen printed electromechanical micro-total analysis system (μtas) for sensitive and rapid detection of infectious diseases. Procedia Technology, 27 () pp. 101-102
2017 Securing electronic transactions via payment gateways: a systematic review. International Journal Internet Technology and Secured Transactions, 7 (3) pp. 245-269
2017 The influence of the electrode dimension on the detection sensitivity of electric cell–substrate impedance sensing (ECIS) and its mathematical modeling. Sensors and Actuators, B: Chemical, 247 () pp. 780-790
2017 Toxicity studies of agarwood essential oil in vero cells using electrical impedance sensor. Malaysian Journal of Fundamental and Applied Sciences, () pp. 540-545
2016 Optical-resonator-based biosensing systems: current status and future prospects. Nanobiosensors in Disease Diagnosis, 5 () pp. 41-50
2016 Possibility of using interdigital sensor (IDS) in estimating different level of blood glucose. Sindh University Research Journal (Science Series), 48 (4D) pp. 209-212
2015 Design, optimization and simulation of a low‑voltage shunt capacitive RF‑MEMS switch. Microsystems Technologies, () pp. 1-13
2015 Multi-frequency CMOS oscillator based on CMOS MEMS SAW resonator. Microsystems Technologies, 21 (9) pp. 1915-1922
2015 Multi‑frequency CMOS oscillator based on CMOS MEMS SAW resonator. Microsystems Technologies, 21 (9) pp. 1915-1922
2015 Piezoelectric thin films for double electrode CMOS MEMS surface acoustic wave (SAW) resonator. Microsystems Technologies, 21 () pp. 1931-1940
2015 Toxicity studies using mammalian cells and impedance spectroscopy method. Sensing and Bio-Sensing Research, 3 () pp. 112-121
2014 A lab-on-chip cell-based biosensor for label-free sensing of water toxicants. Lab on a Chip, (14) pp. 1270-1280
2014 Design and simulation of RF-CMOS SPST switch for reconfigurable RF front-end. International Journal of Advancement in Electronics and Electrical Engineering, 4 (1) pp. 13-23
2014 Mems-based oscillators: a review. IIUM Engineering Journal, 15 (1) pp. 1-15
2014 Silicon compatible acoustic wave resonators: design, fabrication and performance. IIUM Engineering Journal, 15 (2) pp. 23-41
2014 The study of cell attachment and spreading on polyaniline and gelatin using electric cell-substrate impedance sensing. Journal of Pure and Applied Microbiology, 8 (sp.ed) pp. 827-831
2013 A novel cell-based hybrid acoustic wave biosensor with impedimetric sensing capabilities. Sensors & Transducers Journal, 13 () pp. 3039-3055
2013 High quality acquisition of surface electromyography – conditioning circuit design. IOP Conference Series: Materials Science and Engineering , 53 () pp. 1-7
2013 Inductive loops for sensing position as signature signals. IOP Conference Series: Materials Science and Engineering, 53 () pp. 1-11
2012 Acoustic wave based MEMS devices for biosensing applications. Biosensors and Bioelectronics, 33 () pp. 1-9
2012 Fabrication of aluminium doped zinc oxide piezoelectric thin film on a silicon substrate for piezoelectric MEMS energy harvesters. Microsystems Technologies, 18 (11) pp. 1761-1769
2012 Optimization of zinc oxide thin films for silicon surface acoustic wave resonator applications. Advanced Materials Research, 518-23 () pp. 3772-3779
2012 Trench DMOS interface trap characterization by three-terminal charge pumping measurement. Microelectronics Reliability, 52 (12) pp. 2914-2919
2012 Vibration energy harvesting using single and comb-shaped piezoelectric beam structures: modeling and simulation. Procedia Engineering, 41 () pp. 1228-1234
2011 Design, simulation and fabrication of piezoelectric micro generators for aero acoustic applications. Microsystems Technologies, 17 (4) pp. 563-573
2011 Observation on responsive OCV variation od Zinc-Air cell with relative humidity content. IIUM Engineering Journal, 12 (5) pp. 79-86
2011 RF oscillator implementation using integrated CMOS surface acoustic wave resonators . Analog Integrated Circuits and Signal Processing, 68 (1) pp. 33-42
2011 Temperature control circuit for surface acoustic wave (SAW) resonators . IIUM Engineering Journal, 12 (2) pp. 99-109
2010 A comparative study on MEMS piezoelectric microgenerators. Microsystems Technologies, 16 (10) pp. 1673-1681
2010 UHF RFID antenna architectures and applications. Scientific Research and Essays, 5 (10) pp. 1033-1051
2009 Design and application of radio frequency identification systems. European Journal of Scientific Research, 33 (3) pp. 438-453
2009 Micro-hotplate based temperature stabilization system for CMOS SAW resonators . Microsystems Technologies, 15 (8) pp. 1187-1193
2009 RFID reader architectures and applications. Microwave Journal, 52 (12) pp. 24-34
2007 Modeling and fabrication of CMOS surface acoustic wave resonators. IEEE Transactions on Microwave Theory and Techniques, 55 (5) pp. 992-1001
Conference or Workshop Item

2023 Biocompatibility assessment of wearable C/TPU/Tegaderm strain sensors. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE),
2023 Characterization and fabrication of piezoelectric energy harvesting ZnO nanorod on textile by hydrothermal method. In: IEEE International Conference on Sensors and Nanotechnology (SENNANO 2023),
2023 Chitosan as natural binder for eco-friendly printable conductive ink. In: 2023 IEEE Regional Symposium on Micro and Nanoelectronics (RSM),
2023 Deep learning-based high performance intrusion detection system for imbalanced datasets. In: 2023 9th International Conference on Wireless and Telematics (ICWT),
2023 Design and development of an intuitive desktop application for rapid SARS-CoV-2 diagnosis using electrochemical potentiostat. In: 9th International Conference on Computer and Communication Engineering, ICCCE 2023,
2023 Development of an iOS application leveraging PalmSens MethodSCRIPT for rapid COVID-19 detection. In: IEEE 9th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2023),
2023 Enhancement of quality factor in ST-cut quartz surface acoustic wave devices by using different numbers of IDTs and wavelengths for gas sensing. In: 2023 IEEE International Instrumentation and Measurement Technology Conference (I2MTC),
2023 Finite element simulation of single Zinc Oxide nanorod for piezoelectric nanogenerator. In: 14th IEEE Regional Symposium on Micro and Nanoelectronics (RSM 2023),
2023 Performance evaluation of Laser-Induced Screen Printed Electrodes for electrochemical detection. In: ICSIMA 2023 The 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications 2023,
2023 Portable data acquisition and fluidic system for electrochemical Sensors. In: 2023 IEEE International Instrumentation and Measurement Technology Conference (I2MTC),
2023 What sentiments are generated in learning experiences with autonomous and multicultural engineering teams?. In: IEEE Global Engineering Education Conference (EDUCON 2023),
2022 A framework for self-organized learning environments to develop soft skills in geographically distributed and multicultural engineering teams. In: 2022 IEEE Global Engineering Education Conference (EDUCON),
2022 Evaluation of portable potentiostats for electrochemical measurements: Voltammetry and Impedance spectroscopy. In: 2022 IEEE 8th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA),
2022 Investigation of fluid flow system performance for biosensor application. In: 2022 IEEE 8th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA),
2022 Prototyping and early validation of an integrated, electrochemical and mass three-sensor array for dengue detection. In: 15th International Conference on Biomedical Electronics and Devices,
2021 Advanced Adaptive PID Controller for BLDC Motor. In: 2021 8th International Conference on Computer and Communication Engineering (ICCCE),
2021 Enhancing driver drowsiness detection for data acquisition stage using electrocardiogram. In: 2021 8th International Conference on Computer and Communication Engineering (ICCCE),
2021 Simulation of geometrical parameters of Screen Printed Electrode (SPE) for electrochemical-based sensor. In: IEEE Regional Symposium on Micro and Nanoelectronics (RSM),
2020 Adaptive PID controller using for speed control of the BLDC motor. In: 2020 IEEE International Conference on Semiconductor Electronics (ICSE),
2020 How to publish in high impact journals. In: Webinar Series: How to Publish in High Impact Journals,
2020 Marketing basics for technologists. In: Talk on Marketing Basics for Technologists,
2020 Utilizing of flower pollination algorithm for brushless DC motor speed controller. In: 2020 Emerging Technology in Computing, Communication and Electronics (ETCCE),
2019 Development of integrated electrochemical-quartz crystal microbalance biosensor arrays: towards ultrasensitive, multiplexed and rapid point-of-care dengue detection. In: 12th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2019,
2019 Rapid fabrication and characterization of PDMS microfluidics device using printed conductive silver ink. In: Conference on Biomedical and Advanced Materials, Bio-CAM 2017,
2019 The development of the fuzzy-based infant incubator. In: 5th International Conference on Green Design and Manufacture (IConGDM 2019),
2018 A novel design of low-voltage low-loss K-band RF-MEMS capacitive switch. In: Symposium on Design, Test, Integration & Packaging of MEMS/MOEMS (DTIP),
2018 A proposed resistance-to-time converter with switching impulse calibrators for resistive bridge sensors. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017,
2018 Classical equivalent circuit characterization for a double-layer capacitor. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA) 2017,
2018 Design and optimization of a MEMS quartz mass sensor array for biosensing. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017,
2018 Fabrication and characterization of supercapacitor with activated carbon electrode and NaOH electrolyte. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018,
2018 Frequency reliant wireless power transfer link for a applications of mWatts devices. In: 2018 7th International Conference on Computer and Communication Engineering (ICCCE),
2018 Inductive resonant power transfer and topology consideration. In: 3rd IEEE International Conference on Engineering Technologies and Social Sciences, ICETSS 2017,
2018 Inter-digital sensor for non-invasive blood glucose monitoring. In: 2018 IEEE International Conference on Innovative Research and Development (ICIRD 2018),
2018 Optimized RC timing technique for accurate measurement of minute capacitance changes. In: 3rd IEEE International Conference on Engineering Technologies and Social Sciences, ICETSS 2017,
2018 Preliminary exploration of cell-based SAW detection for water toxicity. In: ASME 2018 International Mechanical Engineering Congress and Exposition (IMECE 2018),
2018 Simulation of RF patch antenna sensor for biological applications. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018,
2018 Theoretical modelling of interdigitated electrode sensor for mammalian cell characterization. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018,
2017 A K-band switched-line phase shifter using novel low-voltage low-loss RF-MEMS switch. In: 2017 IEEE Regional Symposium on Micro and Nanoelectronics (RSM),
2017 Modeling of a novel biosensor with integrated mass and electrochemical sensing capabilities. In: 2016 IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES),
2017 Negative bias temperature instability characterization and lifetime evaluations of submicron pMOSFET. In: 2017 IEEE Symposium on Computer Applications & Industrial Electronics (ISCAIE 2017),
2017 Optimization of printing techniques for electrochemical biosensors. In: 11th Asian Conference on Chemical Sensors (ACCS2015),
2017 Rapid lard identification with portable electronic nose. In: 6th International Conference on Mechatronics - ICOM'17,
2017 Toxicity studies of natural product in vero cells using impedance monitoring. In: International Medical Device and Technology Conference (iMEDiTEC 2017),
2017 Wireless power transmission - exploring source to load inductive link under resonance and varying load condition. In: 14th Student Conference on Research and Development, IEEE (SCOReD2016),
2016 Arduino-based biosensor impedance measurement. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016),
2016 Effect of single event upset on 6T and 12T 32NM CMOS SRAMs circuit. In: 13th Universiti Malaysia Terengganu International Annual Symposium on Sustainability Science and Management (UMTAS 2016),
2016 Hardware and circuit design of a vibrational cleaner. In: International Engineering Research and Innovation Symposium (IRIS),
2016 Implementation of CMOS oscillator for CMOS SAW resonator. In: Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP),
2016 Investigation of acoustic wavelength effects on silicon compatible Al doped ZnO SAW resonator. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016),
2016 Low power and high voltage swing cascode Pierce oscillator for MEMS SAW resonators. In: Symposium on Design, Test, Integration & Packaging of MEMS/MOEMS (DTIP),
2016 Screen printed impedance biosensor for cytotoxicity studies of lung carcinoma cells. In: International Conference for Innovation in Biomedical Engineering and Life Sciences (ICIBEL2015),
2016 Serpentine microfluidic structures for concentration rradient generators. In: Symposium on Design, Test, Integration & Packaging of MEMS/MOEMS (DTIP),
2016 STRETCHABLE lab-on-chip device with impedance spectroscopy capability for mammalian cell studies. In: ASME 2016 International Mechanical Engineering Congress and Exposition, IMECE 2016,
2016 Theoretical and simulated investigation of dielectric charging effect on a capacitive RF-MEMS switch. In: 12th IEEE International Conference on Semiconductor Electronics (ICSE 2016),
2015 Cytotoxicity studies of lung cancer cells using impedance biosensor. In: 2015 International Conference on Smart Sensors and Application (ICSSA),
2015 Dependence of preferred c-axis orientation on RF magnetron sputtering power for AZO/Si acoustic wave devices. In: 2015 Symposium on Design, Integration, Test and Packaging of MEMS and MOEMS (DTIP),
2015 Fabrication of monolithic wheatstone bridge circuit for piezoresistive microcantilever sensor. In: 2015 Symposium on Design, Integration, Test and Packaging of MEMS and MOEMS (DTIP),
2015 Modelling of microfluidics network using electric circuits. In: 2015 IEEE Regional Symposium on Micro and Nanoelectronics (RSM 2015),
2015 Optimization of focusing SAW propagation in piezoelectric medium for microfluidic applications. In: 2015 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP),
2014 Acquisition of a very low voltage and a low frequency biomedical signal- frequency selective filter design. In: 5th International Conference on Computer & Communication Engineering 2014,
2014 Analysis of electromechanical coupling coefficient of surface acoustic wave resonator in ZnO piezoelectric thin film structure. In: 2014 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP),
2014 Bioimpedance spectroscopy system for characterization of cancer cells. In: 5th International Conference on Intelligent and Advanced Systems (ICIAS 2014) ,
2014 Design and implementation of an inductive-based human postures recognition system. In: 2014 International Conference on Biomedical Engineering and Sciences,
2014 Design and optimization of alLow-voltage shunt capacitive RF-MEMS switch. In: Source of the Document DTIP 2014 - Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS 7056641,
2014 Design and simulation of 10 MHz MEMS oscillator. In: 2014 IEEE International Instrumentation and Measurement Technology Conference (I2MTC),
2014 FEM analysis of wavelength effects in piezoelectric substrate. In: 2014 IEEE International Conference on Semiconductor Electronics (ICSE),
2014 Novel low-voltage RF-MEMS switch: design and simulation. In: IEEE International Conference on Semiconductor Electronics, Proceedings, ICSE,
2014 Optimization of resonator design for vibration-based electromagnetic energy harvester. In: 4th International Conference on Noise, Vibration and Comfort, NVC 2012,
2014 Piezoelectric characteristics of CMOS compatible AIN SAW resonators. In: 2014 Asia-Pacific Microwave Conference (APMC 2014),
2014 Posture characterization based on time and frequency domains parameters for erector spine SEMG signal. In: 5th International Conference on Computer and Communication Engineering (ICCCE 2014),
2013 0.35μm SPDT RF CMOS switch for wireless communication application. In: 2013 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2013),
2013 Comparative analysis of zinc oxide and aluminium doped ZnO for GHz CMOS MEMS surface acoustic wave resonator. In: 2013 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP 2013),
2013 Design and analysis of a low-voltage electrostatic actuated RF CMOS-MEMS switch. In: 2013 IEEE Regional Symposium on Micro and Nanoelectronics (RSM),
2013 Design and simulation of 20MHz oscillator using CMOS-MEMS beam resonators. In: 2013 IEEE Regional Symposium on Micro and Nanoelectronics (RSM),
2013 Design and simulation of Clamped-Clamped and Clamped-Free resonators. In: 2013 5th Asia Symposium on Quality Electronic Design (ASQED),
2013 Design and simulation of two-stage CMOS amplifier for MEMS resonator. In: 2013 IEEE International Conference on Circuits and Systems (ICCAS 2013),
2013 Design of two-stage CMOS amplifier for quartz crystal resonator. In: 2013 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA),
2013 Equivalent circuit modeling of two-port Al-doped Zinc Oxide CMOS SAW resonator using MATLAB™. In: 2013 IEEE International Conference on Circuits and Systems (ICCAS 2013),
2013 Finite element modeling of SAW resonator in CMOS technology for single and double interdigitated electrode (IDT) structure. In: 2013 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2013),
2013 RF CMOS-MEMS cantilever resonator. In: 2013 IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA),
2013 The study of cell attachment and spreading on polyaniline and gelatin using electric cell-substrate impedance sensing. In: 3rd International Conference on Biotechnology Engineering (ICBIoE 2013,
2013 Water toxicity detection using cell-based hybrid biosensors. In: 2013 IEEE Sensors,
2012 Design of a pierce oscillator for CMOS SAW resonator. In: International Conference on Computer and Communication Engineering (ICCCE 2012),
2012 Theoretical design of CMOS SAW resonator. In: International Conference on Computer and Communication Engineering (ICCCE 2012),
2011 A low-cost first-order sigma-delta converter design and analysis. In: Instrumentation and Measurement Technology Conference (I2MTC), 2011 IEEE ,
2011 Design and modeling of MEMS SAW resonator on Lithium Niobate. In: 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011),
2011 Design and modelling of an impedance-based MEMS biosensor. In: Micro and Nanoelectronics (RSM), 2011 IEEE Regional Symposium on,
2011 Design and simulation of an on-chip oversampling converter with a CMOS-MEMS differential capacitive sensor. In: 2011 IEEE Symposium Design, Test and Packaging of MEMS and MOEMS,
2011 Design of a 5GHz phase-locked loop. In: Micro and Nanoelectronics (RSM), 2011 IEEE Regional Symposium on,
2011 Development of an RF-CMOS surface acoustic wave (SAW) resonator. In: Circuits and Systems (MWSCAS), 2011 IEEE 54th International Midwest Symposium on,
2011 Modeling of the reliability baseline for process control monitoring kerf structures. In: 2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM),
2011 Novel MEMS fully differential capacitive transducer design and analysis. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011),
2011 Performance evaluation of MEMS piezoelectric inertial energy generator. In: 2011 IEEE Symposium Design, Test and Packaging of MEMS and MOEMS (DTIP 2011),
2011 Study of cells attachment using impedance spectroscopy technique . In: International Mechanical Engineering Congress & Exposition (IMECE 2011),
2011 Study of cells attachment using impedance spectroscopy technique. In: ASME International Mechanical Engineering Congress and Exposition (ASME 2011),
2010 Analysis of inductive powering harvesting circuit. In: 2010 IEEE International Conference on Semiconductor Electronics (ICSE),
2010 Characterization of endothelial cells using electrochemical impedance spectroscopy. In: Asia Pacific Conference on Circuits and Systems (APCCAS 2010),
2010 Characterization of endothelial cells using electrochemical impedance spectroscopy. In: 2010 IEEE Asia Pacific Conference on Circuit and System (APCCAS),
2010 Design and analysis of a first-order sigma-delta analog-to-digital converter for MEMS resistive sensor. In: 2010 IEEE International Conference on Semiconductor Electronics (ICSE),
2010 Design and fabrication of Surface Acoustic Wave resonators on Lithium Niobate. In: 2010 IEEE Student Conference on Research and Development (SCOReD 2010),
2010 Design and simulation of a lumped element metal finger capacitor for RF-CMOS power splitters. In: Circuits and Systems (APCCAS), 2010 IEEE Asia Pacific Conference on,
2010 Electrical cell-substrate impedance sensing (ECIS) based biosensor for characterization of DF-1 cells. In: International Conference on Computer and Communication Engineering (ICCCE 2010),
2010 Finite modeling of SAW resonator for DF-1 cells. In: 2010 IEEE EMBS Conference on Biomedical Sciences (IECBS 2010),
2010 Measurements and modeling of temperature compensated surface acoustic wave resonators. In: 2010 Asia-Pacific Conference on Applied Electromagnetics (APACE 2010),
2010 MEMS energy harvester and condition monitoring sensor for power plants. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010),
2010 Methods of detection of hazardous materials using quartz crystal microbalance. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010),
2010 Simulation of a MEMS piezoelectric energy harvester. In: 2010 Symposium on Design Test Integration and Packaging of MEMS/MOEMS (DTIP 2010),
2010 Simulation of a surface transverse wave biosensor for DF-1 cells. In: International Conference on Computer and Communication Engineering (ICCCE 2010),
2010 Simulation of a surface-transverse wave (STW) biosensor for DF-1 cells. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010),
2010 Simulation of MEMs piezoelectric energy harvester. In: 2010 Symposium on Design Test Integration and Packaging of MEMS/MOEMS (DTIP 2010),
2010 Simulations of surface and bulk acoustic wave MEMS biosensors. In: 2010 Symposium on Design Test Integration and Packaging of MEMS/MOEMS (DTIP),
2010 Theoretical modeling and simulation of MEMS piezoelectric energy harvester. In: International Conference on Computer and Communication Engineering (ICCCE 2010),
2009 Design and simulation of RF-CMOS spiral inductors for ISM band RFID reader circuits. In: 2009 IEEE Workshop on Microelectronics and Electron Devices (WMED),
2009 Fabrication techniques and performance of piezoelectric energy harvesters. In: 2009 3rd International Conference on Energy and Environment ,
2009 MEMS biosensor for potential cancer cell detection. In: ASME International Mechanical Engineering Congress & Exposition (ASME 2009),
2009 The advent of industry fit RFID readers. In: 2008 International Conference on Advanced Computer Theory and Engineering ICACTE 2008,
2008 A high linearity CMOS RF amplifier for power control module in RFID reader. In: 3rd International Conference on Mechatronics, ICOM’08,
2008 On-chip hotplate for temperature control of CMOS SAW resonators. In: Design, Test, Integration and Packaging of MEMS/MOEMS, 2008,
2006 Design and implementation of a 1GHz CMOS resonator utilizing surface acoustic wave. In: International Symposium on Circuits and Systems (ISCAS 2006),
2005 CMOS surface acoustic wave oscillators. In: Circuits and Systems, 2005. 48th Midwest Symposium on,
2002 CMOS design and implementation of sigma-delta analog-to-digital data converter suitable for MEMS devices. In: 45th IEEE International Midwest Symposium on Circuits and System,
Book

2018 Fundamentals of microelectronic circuits, 2nd Edition. Pearson Malaysia, ISBN: 978-967-349-755-3
2012 Fundamentals of microelectronic circuits. Pearson Malaysia Sdn Bhd, ISBN: 978-967-349-202-2
2011 Interfacing electronic for measurement, signal processing and wireless communication. IIUM Press, ISBN: 9789674181710
Book Section

2023 Design and fabrication technologies for microfluidic sensors. In: Elsevier, ISBN: 978-0-12-823846-2, pp. 41-85
2019 Recognition of bacterial DNA on SAW-based biosensors. In: Elsevier, ISBN: 978-0-12-813900-4, pp. 117-140
2014 Technical and economic feasibility of sensor technology for health/environmental condition monitoring. In: Elsevier, ISBN: 9780080965321, pp. 499-514
2012 Acoustic wave based MEMS devices, development and application. In: InTech, ISBN: 9789535103066, pp.
2012 RF-MEMS based oscillators. In: IGI-Global, ISBN: 9781466600836, pp. 120-155
2012 RF-MEMS based oscillators. In: IGI-Global, ISBN: 9781466600836, pp. 120-155
2011 A high linearity CMOS RF amplifier for power control module in RFID reader . In: IIUM Press, ISBN: 9789670225685, pp. 203-208
2011 Circuit design of a clock data recovery. In: IIUM Press, ISBN: 9789674181536, pp. 365-375
2011 CMOS operational amplifier design. In: IIUM Press, ISBN: 9789674181710, pp. 60-67
2011 Comparative analysis of low power VLSI circuit techniques. In: IIUM Press, ISBN: 9789670225814, pp. 219-234
2011 Converters results verifications. In: IIUM Press, ISBN: 9789674181710, pp. 73-76
2011 Data conversion basic concepts. In: IIUM Press, ISBN: 9789674181710, pp. 36-40
2011 Design of MEMS cantilever energy harvester. In: IIUM Press, ISBN: 9789674181536, pp. 57-66
2011 Digital-to-analog converter. In: IIUM Press, ISBN: 9789674181710, pp. 68-72
2011 MEMS surface acoustic waves oscillator. In: IIUM Press, ISBN: 9789674181536, pp. 23-36
2011 Nyquist-rate analog-to-digital converter. In: IIUM Press, ISBN: 9789674181710, pp. 41-46
2011 Oversampling analog-to-digital converter. In: IIUM Press, ISBN: 9789674181710, pp. 47-52
2011 Sensor and sensor response-issues and interfacing . In: IIUM Press, ISBN: 978-967-418-172-7, pp. 119-131
2011 Switched-capacitor integrator design. In: IIUM Press, ISBN: 9789674181710, pp. 53-59
Monograph

2020 Investigation of electropolymerized carbon-based nanomaterials as electrodes in energy storage devices for improved microbial fuel cell. In: ,