Staff Directory


Mohammed Ataur Rahman

Academic Qualification

  • Automotive Engineering - Doctor of Philosophy, Universiti Putra Malaysia (UPM)
  • MBA (Techno-Entrepreneurship) - Masters Degree, edu 1 - 1
  • Mechanical Engineering - Bachelor Degree, Chittagong University of Engineering & Technology

Mohammed Ataur Rahman (Prof. Dr.)

Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING


arat@iium.edu.my
4544


Expert Profile


Prof. Dr. Md. Ataur Rahman obtained the Bachelor of Science (Mechanical Engineering) from the Chittagong University of Engineering and Technology (CUET), Bangladesh in 1991 and started his career as an assistant engineer at the Bangladesh Machines Tools Factory, Dhaka, Bangladesh in 1992 and later he was appointed as an engineer in 1994.
He was appointed as a maintenance engineer at the STEADTLER (Germany) Malaysia Sdn Bhd (1996-1998). He obtained the Master of Business Administration (Techno-Entrepreneurship) from University of Technology Malaysia (UTM) in 2000 and Ph.D in Engineering (Automotive Engineering) from University Putra Malaysia (UPM) in 2005. He was appointed as a Visiting Fellow for “Designing Automation System for Off-road Vehicle at the Mechanical Engineering Laboratory, the University of Tokyo, Japan (2005-2006).
He was appointed as an Assistant Professor at the Department of Mechanical Engineering, International Islamic University Malaysia (IIUM) in 2006. Later, he was promoted to the post of Associate Professor in 2010 and Professor in 2014. He was appointed as the team leader of the IIUM Smart Mobility by the Department of Mechanical Engineering of IIUM for Proton Green Mobility Challenge (PGMC) 2012 on “Designing Electric Vehicle and competing with the top 10 Universities in Malaysia. His team got the Overall Championship Award and 1st position for both “Fastest and Farthest Distance Travelling.

Research areas:
Electric & Hybrid electric vehicle; Electric vehicle's battery thermal management system; Organic renewable energy conversion & Storage technology; Electromagnetic continuously variable transmission; Auto-electromagnetic seamless gearbox;Swamp/peat terrain vehicle; Intelligent control system for swamp/peat terrain vehicle.



Professional Membership


  • 2013 - 2022: Member of Profesional Body / Association: (CEng.), Institute of Mechanical Engineers, United Kingdom


Teaching Responsibilities


ADVANCED VEHICLE DYNAMIC 2019/2020
AUTOMOTIVE CHASIS SYSTEMS 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010 2008/2009
AUTOMOTIVE CONTROL SYSTEMS 2017/2018
Automotive Engineering Lab III 2017/2018
AUTOMOTIVE ENGINEERING LAB IV 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2012/2013 2011/2012 2010/2011 2009/2010 2008/2009
AUTOMOTIVE ENGINEERING LAB V 2019/2020 2018/2019
AUTOMOTIVE INSTRUMENT SYSTEM 2007/2008 2006/2007
DESIGN OF AUTOMOTIVE TRANSMISSION SYSTEMS 2014/2015 2013/2014
DYNAMICS 2007/2008 2006/2007
ELECTRIC AND HYBRID VEHICLES 2018/2019 2017/2018
ENGINE DESIGN 2011/2012
INTRODUCTION TO AUTOMOTIVE ENGINEERING 2012/2013 2011/2012 2010/2011 2009/2010 2008/2009
MICRO ELECTROMECHANICAL SYSTEMS 2015/2016 2014/2015 2013/2014
POWER TRAIN SYSTEMS 2015/2016
PROJECT I 2023/2024 2022/2023 2021/2022 2020/2021 2008/2009 2007/2008
PROJECT II 2019/2020 2018/2019 2008/2009 2007/2008
VEHICLE DYNAMICS 2013/2014
VEHICLE DYNAMICS AND CHASSIS SYSTEM 2023/2024
VEHICLE DYNAMICS AND CHASSIS SYSTEMS 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014
VEHICLE ELECTRICAL AND ELECTRONICS 2023/2024
VEHICLE ELECTRICAL AND ELECTRONICS SYSTEMS 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019
VEHICLE ELECTRICAL AND INSTRUMENTATION SYSTEMS 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010 2008/2009 2007/2008
VEHICLE ELECTRICAL SYSTEMS 2008/2009 2007/2008 2006/2007
VEHICLE ELECTRONICS & INSTRUMENTATION SYSTEMS 2018/2019 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013


Supervision


Design And Evaluation Of Cyber Security Of Blockchain And Distributed Ledger For International Payment.
Ph.D Completed 2023 Co-supervisor
Development Of Solar Structural Supercapacitor System For Ev.
Ph.D Completed 2022 Main Supervisor
Development Of Intelligent Electromagnetic Continuously Variable Transmission.
Ph.D Completed 2021 Main Supervisor
Development Of Thermal Management Control System Of Electric Vehicle Battery Charging.
Ph.D Completed 2020 Co-supervisor
Study On Waste Heat Recovery From Exhaust Gas Of The Natural Aspirated Spark Ignition Engine.
Ph.D Completed 2017 Co-supervisor
Intelligent Air-Cushion System For A Swamp Peat Terrain Vehicle.
Ph.D Completed 2011 Main Supervisor
Development Of An Artifial Intellligence Embedded Autonomous Transmisssion System For Electrical Vehicles.
Ph.D In Progress Main Supervisor
Development Of Adaptive Neuro-Fuzzy Control Evaporative Two-Phase Lithium-Ion Batteries Thermal Management System..
Ph.D In Progress Main Supervisor
Modeling And Optimization Of Electric Vehicle Regenerative Braking System Via Automatic Control.
Ph.D In Progress Co-supervisor
A Fast Computation Nonlinear Predictive For Energy Efficient Adaptive Cruise System.
Ph.D In Progress Co-supervisor
Enhance The Overall Performance Of Brayton Cycling In Marine Propulsion Plant Using Nanofluids.
Ph.D In Progress Co-supervisor
Development Of Zinc Oxide/Silicon Dioxide Semi-Conductive Thermoelectric Generator (Steg) .
Master Completed 2021 Main Supervisor
Development Of Zno/Pva Nanocomposite For Solar Cell Application.
Master Completed 2021 Main Supervisor
Development Of Autonomous Electromagnetic Two Speed Gearbox For Electric Vehicle.
Master Completed 2021 Main Supervisor
Modelling Of Graphene-Palladium Catalyst Based Steam Reformer For Hydrogen Generation From Exhaust Of Engine.
Master Completed 2017 Main Supervisor
Modelling And Simulation Of An Advanced Charging System For Electric Vehicles.
Master Completed 2016 Main Supervisor
Dynamic Modeling Of Waste Energy Harvesting System For Spark Ignition Internal Combustion Engine.
Master Completed 2015 Main Supervisor
Development Of Evaporative Cooling Battery Thermal Management System For Electric Vehicles.
Master Completed 2014 Main Supervisor
Design And Development Of Electromagnetic Actuaton For Cvt Application.
Master Completed 2013 Main Supervisor


Research Projects


Completed
2020 - 2023 Investigation of a Low Computation Nonlinear Predictive Functional Control for energy-efficient Adaptive Cruise Control.
2019 - 2022 Prototyping of Artificial Intelligent Embedded IoT based Driveline for Electric Coaster
2016 - 2019 Development Prototype of Electromagnetic Actuator for the Continuosly Variable Transmission of Passenger Car
2016 - 2020 Development of a Laboratory Scale Palladium (Pd)/ Graphene Oxide (GO) Catalyst Based Steam Reformer
2015 - 2019 Study of Three Dimensional Graphene Composites for Lead-supercapacitor Hybrid Battery System
2014 - 2017 Parametric Modelling and Development of Battery Cell Balancing for Energy Optimisation in Electric Vehicle (EV)
2013 - 2017 Development of Wireless Battery Management System (Wi-BMS) for Electrical Vehicle (EV)
2013 - 2017 Development of Green Transportation System
2012 - 2014 Development of Electrical Vehicle by Converting Proton SAGA Conventional Car
2011 - 2013 Modification of The Design and Developed Hybrid Engine Powered Urban Concept Car
2010 - 2012 The Hybrid Car With Waste Gas Recovery
2010 - 2014 Electromagnetic Actuated CVT System for Medium Size Passenger Car
2009 - 2010 Design and Development of an "Urban Concept Hybrid Car"
2009 - 2011 Design and analysis of analog to digital Conversion circuit using Multi-Valued Logic
2008 - 2010 Study on Traction Mechanics of a Hybird Semi-Tracked-Wheeled Vehicle for Low Bearing Capacity Peat Soil
2008 - 2011 Design and Development a Model on Hybrid Full-Tracked Air-Cushion Electrical Vehicle for Swamp Peat Terrain in Malaysia
2008 - 2010 Design and Fabrication of 2nd Generation IIUM Buggy Car
2008 - 2011 Investigation and Probable Solution of Low End Torque Dip Problem of 1.6L Gasoline Engine
On-Going
2023 - Present Development of a fuzzy intelligent adaptive autonomous servo-electromagnetic emergency braking system for high-speed electric vehicle
2022 - Present Prototyping Fuzzy Intelligence Adaptive Electromagnetic Two-speed Transmission for Electric Vehicle
2021 - Present The Effect of Recurrent Pedal Pressings and Sitting Posture on the Driver's Fatigue During Road Traffic Delay via System Identification Models and Deep Learning Techniques
2021 - Present Predictive Cascade Framework for Performance Optimization of an Energy-Efficient Adaptive Cruise Control.
2019 - Present Modelling of an adaptive control framework to synchronize the charging/discharging of the hybrid energy system of electric vehicles
2013 - Present IIUM Centre of Excellence for Electric Mobility (ICEM)
2012 - Present Proton Green Mobility
2008 - Present Hydraulic Actuator Control Metal Belt-pulley Continously Variable Transmission for a Medium Scale Vehicle


Award & Recognition


17 Oct, 2016 Double Gold Medal - British Invention Shows 2014 International
31 Jul, 2016 Gold Medal - International Innovation & Technology Expo 2011 National
27 Jul, 2016 Silver Medal - International Islamic University Malaysia University
17 Oct, 2014 Bronze Medal - British Invention Shows 2014 International
17 Oct, 2014 Gold Medal - British Invention Shows 2014 International


Publications


Article

2023 Characterization and application of nano-composite zinc oxide/poly vinyl alcohol thin-film in solar cell performance enhancement. Journal of Mechanical Science and Technology, 37 (10) pp. 1-7
2023 Solar energy dependent supercapacitor system with ANFIS controller for auxiliary load of electric vehicle. Energies, 16 (6) pp. 1-25
2022 A comprehensive analysis of blockchain-based cryptocurrency mining impact on energy consumption. International Journal of Advanced Computer Science and Applications (IJACSA), 13 (4) pp. 590-598
2022 A fuzzy-logic-controlled two-speed electromagnetic gearbox for electric vehicles. International Journal of Technology : IJTech, 13 (2) pp. 297-309
2022 A review on blockchain technology for distribution of energy. International Journal of Engineering Materials and Manufacture, 7 (2) pp. 61-70
2022 Autonomous braking system: automobile use. MIST International Journal of Science and Technology, 9 (December 2021) pp. 1-6
2022 Autonomous electromagnetic two-speed gearbox for electric vehicle. International Journal of Automotive Technology, 20 (4) pp. xxx-xxx
2022 IoT-based electromagnetic actuator for CVT: basic design and prototyping. International Journal of Powertrains, 11 (1) pp. 38-61
2021 Al-ZnO / CuO_Cfrp organic structural auxiliary energy storage system for electric vehicle. Journal of Solid State Technology, 28 (1 & 2) pp. 103-116
2021 Cryptocurrency integration challenges in blockchain for financial institution. Asian Journal of Electrical and Electronic Engineering, 1 (2) pp. 28-36
2021 Development of solar supercapacitor by utilizing organic polymer and metal oxides for subsystem of EV. Materials Research Express IOP Publishing, 2021 (8) pp. 1-23
2021 Performance investigation of ZnO/PVA nanocomposite film for organic solar cell. Materials Today:Proceedings, 46 (9) pp. xx-xx
2021 The impact of film thickness on the properties of ZnO/PVA nanocomposite film. Materials Research Express, 8 (7) pp. 1-12
2021 Thermal analysis of LiFePo4 batteries during rapid charge with evaporative cooling system. International Journal Energy Technology and Policy, 17 (6) pp. 556-573
2020 EMA-CVT performance for UDDS and HWFET cycles with fuzzy logic approach. Test Engineering & Management, 83 (March/April) pp. 13775-13781
2020 Modeling and validation of electric vehicle drive line architectureusing bond graph. Test Engineering and Management, 82 (January - February 2020) pp. 15154 -15167
2020 Organic photoelectric-supercapacitor power source of electric vehicle. Test Engineering and Management, 82 () pp. 15175 -15182
2019 Development of electro-hydro automatic parking braking system for automotive system. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S) pp. 264-269
2019 Development of rapid charging system for EV battery. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S) pp. 292-297
2019 Efficiency of thin film photovoltaic paint: a brief review. Blue Eyes Intelligence Engineering & Sciences Publication, 7 (6S) pp. 163-169
2019 Electromagnetic contactless torque transducer: torque measurement and shaft impediment approach. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S) pp. 298-303
2019 Malaysian automobile industry and green supply chain management. International Journal of Recent Technology and Engineering (IJRTE), 7 (6S) pp. 158-162
2019 Study on the development of electromagnetic two speed gearbox for EV. International Journal of Rescent Technology and Engineering (IJRTE), 7 (6S) pp. 147-152
2019 Study on the intelligent control system of EMA-CVT. International Journal of Recent Technology and Engineering (IJRTE), 7 (65) pp. 48-53
2019 Temperature effect and battery charging characteristics analysis based on charging C-rate. International Journal of Engineering and Advanced Technology, 9 (1) pp. 159-165
2018 A parametric approach for the study of heat flow between street canyon and the atmosphere. Planning Malaysia: Journal of the Malaysian Institute of Planners, 16 (2) pp. 50-61
2018 Electro-hydro-mechanical braking system for passenger vehicle. Journal of Applied Science, 2018 () pp. 1-9
2018 Modelling and simulation of graphene/palladium catalyst reformer for hydrogen generation from the waste of IC engine. IOP Conference Series: Materials Science and Engineering, 290 () pp. 2-13
2018 Nano conductive filler polymer towards energy efficient EV: A review. Energy Education Science and Technology Part A: Energy Science and Research, 36 (3) pp. 185-204
2018 Power optimisation of electric coaster. International Journal of Electric and Hybrid Vehicles, 10 (1) pp. 82-94
2018 Prospect and challenges of electric vehicle adaptability: an energy review Malaysia. Energy Education Science and Technology Part A:Energy Science and Research, 36 (3) pp. 139-151
2017 Health impact of river water pollution in Malaysia. International Journal of Advanced and Applied Science, 4 (5) pp. 78-85
2017 Intelligent control electromagnetic actuated continuously variable transmission system for passenger car. IOP Conf. Series: Materials Science and Engineering, 184 () pp.
2017 Investigation of aluminum heat sink design with thermoelectric generator. IOP Conf. Series: Materials Science and Engineering, 184 () pp.
2017 Parametric study of palladium/graphene catalyst on-board steam reformer for hydrogen generation from IC engine’s waste. International Journal of Engineering & Technology IJET-IJENS, 17 (1) pp. 13-24
2017 Physics of ZnO/SiO2 electrolyte semi-conductive thermal electric generator. International Journal of Advanced and Applied Sciences, 4 (5) pp. 35-40
2017 Recycling and disposal of lithium batteries: an economical and environmental approach. IIUM Engineering Journal, 18 (2) pp. 238-252
2017 The knowledge, awareness, attitude and motivational analysis of plastic waste and household perspective in Malaysia. Environmental Science and Pollution Research, 24 (3) pp. 2304-2315
2017 The theory of the development of an electromagnetic engine for automotive use. International Journal of Advanced Robotics and Automation, 2 (1) pp. 1-8
2017 Thermoelectric technology for IC engine waste energy harvesting:
liquid cooling approach. International Journal of Scientific and Engineering Research, 7 (11) pp. 1-12
2017 Two-phase evaporative battery thermal management technology for EVs/HEVs: theory and control. International Journal of Automotive Technology, 18 (5) pp. 875-882
2016 Lithium battery recycling management and policy. International Journal of Energy Technology and Policy, 13 (3) pp. 278-291
2016 Resonant-boost LC converter base charge balancing system for electric vehicle. ARPN Journal of Engineering and Applied Sciences, 11 (1) pp. 362-367
2015 ANSYS finite element design of an energy saving magneto-rheological damper with improved dispersion stability. Journal of Mechanical Science and Technology, 29 (7) pp. 2793-2802
2015 Electricity generation from EV body build with Al2O3 filler ER sandwiched by carbon fiber and lithium thin plate . Energy Education Science and Technology Part A: Energy Science and Research , 33 (3) pp.
2015 How individual values and attitude influence consumers’ purchase intention of electric vehicles—some insights from Kuala Lumpur, Malaysia. Environment and Urbanization ASIA, 6 (2) pp. 1-18
2015 Investigation of PEM fuel cell for automotive use. IIUM Engineering Journal, 16 (2) pp. 69-78
2015 Nano-battery technology for EV-HEV panel: a pioneering study. IIUM Engineering Journal, 16 (2) pp. 57-68
2015 Power generation from waste of IC engines. Renewable and Sustainable Energy Reviews, 51 () pp. 382-395
2014 Design and fabrication of a simple cost effective spin coater for deposition of thin film. Advances in Environmental Biology, 8 (3) pp. 729-733
2014 Development of electric vehicle: public perception and attitude, the Malaysian approach. World Review of Business Research, 5 (2) pp. 149-167
2014 Development of electric vehicle: public perceptionand attitude, the Malaysian approach. World Review on International Transportation Research, 5 (2) pp. 149-167
2014 Energy efficient electromagnetic actuated CVT system. Journal of Mechanical Science and Technology, 28 (4) pp. 1153-1160
2014 Fuzzy controlled evaporative battery thermal management system for EV/HEV. International Journal of Electric and Hybrid Vehicles (IJEHV), 7 () pp. 1-21
2014 Fuzzy logic based model for prediction of building wall humidity level. Indoor and Built Environment, 23 (4) pp. 565-573
2014 Optimal design of magneto-rheological damper comparing different configurations by finite element analysis. Journal of Mechanical Science and Technology, 28 (9) pp. 3667-3677
2013 Evaluation of wind turbine power generation by using an adaptive neuro fuzzy inference system. Journal of Renewable and Sustainable Energy Editorial Office, xx (xx) pp. xx-xx
2013 Fuzzy control enerygy efficient hybrid engine for small scale vehicle. Research Journal of Applied Science, Engineering and Technology, () pp.
2013 Nonlinear modeling and simulation of waste energy harvesting system for hybrid engine: fuzzy logic approach. Journal of Renewable and Sustainable Energy Editorial Office, 5 () pp. 1-13
2013 Performance investigation of an advanced tracked prime mover on the low bearing soil. Journal of Terramechanics, 50 (4) pp. 230-244
2013 Study on the development of a fuzzy logic control electromagnetic actuated CVT system. International Journal of Engineering Systems Modelling and Simulation, 5 (4) pp. 217-225
2012 Drag analysis of an aircraft wing model and without bird feather like winglet. International Journal of Aerospace and Mechanical Engineering, 6 (1) pp. 8-13
2012 Dynamic modeling and simulation of waste energy harvesting system for urban car. Advanced Material Research, 576 () pp. 679-682
2012 Fuzzy knowledge-based model for prediction of traction force of an electric golf car. Journal of Terramechanics, 49 (1) pp. 13-25
2012 Intelligent air-cushion tracked vehicle performance investigation: neural-networks. International Journal of Heavy Vehicle Systems (IJHVS), 19 (4) pp. 407-426
2012 Investigation using simulations for the development of low cost catalytic converter from non-precious metals. Advanced Materials Research, 445 () pp. 899-904
2012 Kinematics and nonlinear control of an electromagnetic actuated CVT system for passenger vehicle. Journal of Mechanical Science and Technology, 26 (7) pp. 1-9
2011 A study on automated traction control system of an electrical golf car. International Journal of Electric and Hybrid Vehicles (IJEHV), 3 (1) pp. 47-61
2011 Application of fuzzy logic approach for an aircraft model with and without winglet. International Journal of Aerospace and Mechanical Engineering, 5 (4) pp. 224-232
2011 Application of Multi-objective Genetic Algorithm (MOGA) for design optimization of valve timing at various engine speeds. Advanced Materials Research, 265 () pp. 1719-1724
2011 Cushion pressure control system for an intelligent air-cushion track vehicle. Journal of Mechanical Science and Technology, 25 (4) pp. 1035-1041
2011 Design parameters study of an intelligent air-cushion tracked vehicle. Transactions of the Canadian Society of Mechanical Engineering, () pp.
2011 Development of a model of of energy efficient hybrid engine towards green technology. International Journal of Electric and Hybrid Vehicles, 3 (2) pp. 138-151
2011 Dynamic modeling of intelligent air-cushion tracked vehicle for swamp peat. World Academy of Science, Engineering and Technology, 75 () pp. 50-57
2011 Fuzzy evaluation for an intelligent air-cushion tracked vehicle performance investigation. Journal of Terramechanics, () pp.
2011 Fuzzy expert system for controlling swamp terrain intelligent air-cushion tracked vehicle. International Journal of Automotive Technology, 12 (5) pp. 745-753
2011 Fuzzy logic control electromagnetic actuated CVT system. Journal of the Chinese Institution of Engineers, 35 () pp.
2011 Integrated mechanics of hybrid electrical air-cushion tracked vehicle for swamp peat. International Journal of Heavy Vehicle Systems (IJHVS), 18 (3) pp. 227-244
2011 Intelligent air-cushion tracked vehicle performance investigation: neural-networks. International Journal of Heavy Vehicle Systems (IJHVS), xx (xx) pp.
2011 Nonlinear controller of an air-cushion system for a swamp terrain vehicle: fuzzy logic approach. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 () pp. 721-734
2011 Performance measurement of a tracked vehicle system. International Journal of Automotive Technology, 12 (4) pp. 503-512
2011 Possible solution to smoothen the nature of the torque curve of the CAMPRO engine. International Journal of Vehicle Systems Modelling and Testing, 6 (3/4) pp. 202-218
2011 Prediction of aerodynamic characteristics of an aircraft model with and without winglet using fuzzy logic technique. Aerospace Science and Technology, 15 (8) pp. 595-605
2010 Development of hybrid electrical air-cushion tracked vehicle for swamp peat. Journal of Terramechanics, 47 (1) pp. 45-54
2010 Dynamic modeling of intelligent air-cushion tracked vehicle for swamp peat. International Journal of Aerospace and Mechanical Engineering, 4 (1) pp. 288-295
2010 Load distribution for an intelligent air-cushion track vehicle based on optimal power consumption. International Journal of Vehicle Systems Modelling and Testing, 5 (2/3) pp. 237-253
2010 Power consumption prediction for an intelligent air-cushion tracked vehicle: fuzzy expert system. Journal of Energy and Power Engineering, 4 (5) pp. 10-17
2010 Tractive performance prediction for intelligent air-cushion track vehicle: fuzzy logic approach. World Academy of Science, Engineering and Technology, 62 () pp. 163-169
2009 Hybrid electrical air-cushion tracked vehicle for swamp peat in Malaysia. The Open Mechanical Engineering Journal, (3) pp. 63-71
2009 Kinematics model for the wheeled vehicle tractive performance determination on Sepang’s peat terrain in Malaysia. International Journal of Heavy Vehicle Systems (IJHVS), 16 (1/2) pp. 225-242
2009 Prediction of power generation of small scale vertical axis wind turbine using fuzzy logic. Journal of Urban and Emvironmental Engineering, 3 (2) pp. 43-51
2009 Tractive performance of LGP-30 wheeled vehicle during straight motion on Sepang peat terrain in Malaysia. The Open Transportation Journal, 3 () pp. 15-28
2008 Investigation and probable solution of low end torque dip problem of CAMPRO 1.6L Engine. International Journal of Mechanical and Materials Engineering (IJMME), 3 (2) pp. 176-186
2007 Comparison of drift eliminators characteristics in evaporative condenser and spray-filled tower. International Energy Journal, 8 (3) pp. 155-162
2007 Effectiveness of the developed instrumentation system on the vehicle tractive performance measurement. International Journal of Mechanical and Materials Engineering (IJMME), 2 (2) pp. 189-199
2007 Mobility investigation of a designed and developed segmented rubber track vehicle on Sepang peat terrain in Malaysia. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 221 () pp. 789-800
2007 Optimal design of automobile exhaust system using GT-power. International Journal of Mechanical and Materials Engineering (IJMME), 2 (1) pp. 40-47
2007 Simulation and experimental investigation of muffler performance. International Journal of Mechanical and Materials Engineering (IJMME), 2 (2) pp. 118-124
2006 Traction mechanics of the designed and developed segmented rubber track vehicle for Sepang peat terrain in Malaysia during turning motion: theoretical and experimental analysis. International Journal of Heavy Vehicle Systems (IJHVS), 13 (4) pp. 324-350
2006 Tractive performance of a designed and developed segmented rubber tracked vehicle on Sepang peat terrain during straight motion: theoretical analysis and experimental substantiation. International Journal of Heavy Vehicle Systems (IJHVS), 13 (4) pp. 298-323
2005 Design and development of a segmented rubber tracked vehicle for Sepang peat terrain in Malaysia. International Journal of Heavy Vehicle Systems (IJHVS), 12 (3) pp. 239-267
2005 Designing framework of a segmented rubber tracked vehicle for Sepang peat terrain in Malaysia . IIUM Engineering Journal, 6 (1) pp. 1-22
2005 Processes involved in the design of a segmented rubber tracked vehicle for Sepang peat terrain in Malaysia. International Journal of Vehicle Design (IJVD), 38 (4) pp. 347-378
2005 Simulated steerability of a segmented rubber tracked vehicle during turning on sepang peat terrain in Malaysia. International Journal of Heavy Vehicle Systems (IJHVS), 12 (2) pp. 139-168
2004 Mechanical properties in relation to vehicle mobility of Sepang peat terrain in Malaysia. Journal of Terramechanics, 41 (1) pp. 25-40
Conference or Workshop Item

2023 Nano-structured zinc oxide/silicon dioxide thermoelectric generator: a waste heat harvesting technology. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022),
2023 Palladium/lathanum cobaltite catalyst polymer exchange membrane fuel cell for electric vehicle. In: 5th International Conference on Advances in Manufacturing and Materials Engineering,
2022 Modelling of pedals pressing mechanisms for low speed driving in road traffic delay. In: ICMAAE-2021,
2020 Autonomous electromagnetic continuously variable transmission for electric vehicle. In: 2020 11th IEEE Annual Information Technology, Electronics and Mobile Communication Conference (IEMCON),
2018 Modeling and simulation of Graphene/Palladium catalyst reformer for hydrogen generation from waste of IC engine. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017,
2017 A novel electro conductive graphene/silicon-dioxide thermo-electric generator. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16),
2017 Analysis of the internal temperature of the cells in a battery pack during SOC balancing. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16),
2017 Hybrid engine powered city car: fuzzy controlled approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16),
2017 Modelling of an advanced charging system for electric vehicles. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE '16),
2017 Wireless battery management system of electric transport. In: 6th International Conference on Mechatronics (ICOM'17),
2016 The prospects of panel style nano-battery technology for EV/HEV. In: 2015 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM 2015),
2014 Design and development of a flying robot with improved time constant in rescue accident victims. In: 3rd International Conference on Mathematical Applications in Engineering (ICMAE'14),
2014 Fuzzy controlled evaporative battery thermal management system for EV/HEV. In: ASME 2014 8th International Conference on Energy Sustainability co-located with ASME 2014 12th Fuel Cell Science, Engineering & Technology Conference,
2014 Noble evaporative battery thermal management system for EV/HEV . In: 4th International Conference on Industrial Engineering and Operations Management (IEOM) 2014,
2014 The design and development of small electric vehicles (EV) using power inverter based AC motor. In: 3rd International Conference on Mathematical Applications in Engineering 2014 (ICMAE’14),
2013 Development of green transportation system. In: IIUM Enginnering Congress 2013(2-4July 2013),
2013 Evaporative cooling system for electric vehicles battery pack. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE 16),
2013 Fuzzy Logic Controlled Electromagnetic Actuated CVT system for passenger car. In: FISITA 2012,
2013 Malaysian perception and attitude towards electric vehicle. In: IIUM Enginnering Congress 2013,
2011 Design and development of automatic parking system and electronic parking fee collection based on number plate recognition. In: 4th International Conference on Advanced Computer Theory and Engineering (ICACTE 2011),
2011 Design and implementation of fuzzy based controller for modern elevator group . In: 2011 IEEE Symposium on Industrial Electronics and Applications (ISIEA),
2011 Design of a 2-bit multi valued analog-to-digital converter . In: 4th International Conference on Mechatronics (ICOM) ,
2011 Design of a current comparator for quaternary multi valued analog to digital converter. In: 2011 IEEE Regional Symposium on Micro and Nanoelectronics (RSM),
2011 Experimental investigation of the swirl effect on CAMPRO engine using designed swirl adapter. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11),
2011 Fuzzy logic traction control system for a golf cart. In: 17th International Conference of the International Society for Terrain-Vehicle Systems,
2011 Intelligent electromagnetic actuated CVT system for passenger car. In: IEEE International Conference on Industrial Engineering and Engineering Management,
2011 Intelligent traction control system of an electric golf car: nonlinear dynamics investigation. In: TSME International Conference on Mechanical Engineering 2011,
2011 Investigation of non-precious metals for the development of low cost catalytic converter. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2011),
2011 Mobility investigation of an intelligent air-cushion tracked vehicle on swamp peat terrain in Malaysia. In: SAE 2011 World Congress & Exhibition,
2011 Possible solution to smoothen the torque curve of the CAMPRO engine. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11),
2011 Study of Fuzzy Controller to control vertical position of an air-cushion tracked vehicle. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development (ICOM 2011),
2011 Study on air-cushion tracked vehicle performance: theoretical analysis and experimental validation. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11),
2011 Study on the development of a fuzzy logic control electromagnetic actuated CVT system. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11),
2010 Design and development of UrbanConcept car. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010),
2010 Development of a fuel efficient hybrid engine towards green technology. In: International Conference on Sustainable Mobility 2010,
2010 Development of an intelligent air-cushion system for a swamp tracked vehicle . In: 33rd FISITA World Automotive Congress 2010,
2010 Finite element method for the study of air-cushion tracked vehicle-terrain interaction. In: International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2010),
2010 Modelling of an Electromagnetic intake & exhaust control hybrid engine. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010),
2010 Tractive efficiency analysis for an intelligent air-cushion tracked vehicle. In: ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010 ,
2009 Electro-mechanically controlled continuously variable transmission system for passenger cars. In: International Conference on Mechanical Engineering 2009 (ICME2009),
2009 Electromagnetic actuated CVT system for vehicle. In: IEEE International Conference on Industrial Engineering and Engineering Management, 2009 (IEEM 2009),
2009 Fuzzy logic approach for prediction the lift coefficient on an aircraft model with and without winglet. In: International Conference on Mechanical Engineering 2009 (ICME2009),
2009 Intelligent air-cushion system of swamp peat vehicle control: fuzzy logic technique. In: International Conference on Mechanical Engineering 2009 (ICME2009),
2009 Investigation of the swirl effect on CAMPRO 1.6L engine using GT-SUITE. In: National Tribology Conference 2009,
2008 Design and development of an automatic car door opening and locking system. In: 3rd International Conference on Mechatronics, ICOM'08,
2008 Hybrid electrical air-cushion tracked vehicle for swamp peat in Malaysia. In: Automotive Engineering Congress, 2008,
2008 Integrated mechanics for design of the hybrid electrical aircushion track vehicle for swamp peat. In: 4th BSME-ASME International Conference on Thermal Engineering,
2008 Investigation of low end torque dip problem of CAMPRO 1.6L engine. In: 13th International Conference on Applied Mechanics and Mechanical Engineering,
2008 Modeling of the developed flexible skirt air-cushion track vehicle model. In: 4th BSME-ASME International Conference on Thermal Engineering,
2008 Probable solution of torque dip problem of CAMPRO 1.6L engine . In: 4th BSME-ASME International Conference on Thermal Engineering,
2007 A ¼ scale hybrid full-tracked air-cushion vehicle for swamp peat terrain in Malaysia. In: International Conference on Mechanical Engineering 2007 (ICME 2007),
2007 Experimental investigation and simulation of muffler performance. In: International Conference on Mechanical Engineering 2007 (ICME 2007),
2007 Mobility of the LGP-30 wheeled vehicle on peat terrain in Malaysia. In: International Conference on Mechanical Engineering 2007 (ICME 2007),
Book

2020 Green transportation system. IIUM Press, International Islamic University Malaysia, ISBN: 978-967-491-021-1
2012 The peat swamp:Productivity, traficability and mechanization. Nova Science Publishers Inc., ISBN: 978-1-61942-670-2
2011 Advanced theory of peat vehicle mobility. VDM Verleg, ISBN: 9783639304329
Book Section

2021 Techno-Economic Analysis of Retrofitted Electric Coaster Introduction in University Campus. In: B.P International, ISBN: 978-93-91882-73-0, pp. 91-108
2020 Development of electro-hydro autonomous parking braking system for electric vehicle. In: Book Publisher International, ISBN: 978-81-949988-1-5, pp. 61-75
2020 Development of electro-hydro autonomous parking braking system for electric vehicle. In: Book Publisher International, ISBN: 978-81-949988-1-5, pp. 61-75
2020 Fuzzy adaptive autonomous electromagnetic 2-speed gearbox for electric vehicle. In: Book Publisher International, ISBN: 978­81­949988­1­5, pp. 41-60
2014 Sensor-controlled intelligent vehicle systems: demand and needs for a global automotive landscape. In: Elsevier, Ltd, ISBN: 9780080965321, pp. 473-497
2011 Design and development of an automatic car door opening and locking system. In: IIUM Press, ISBN: 9789670225685, pp. 48-52
2011 Development of unmanned vehicle utilizing GPS system. In: IIUM Press, ISBN: 9789670225685, pp. 53-58
2011 Performance investigation of energy efficient hybrid engine towards green technology. In: IIUM Press, ISBN: 978-967-418-216-8, pp. 131-137
Monograph

2019 Prototype of electromagnetic actuator for continuously variable transmission for passenger car. In: ,