Staff Directory


Tanveer Saleh

Academic Qualification

  • Ph.D in Engineering (Mechanical) - Doctor of Philosophy, National University of Singapore
  • Master of Science (Mechatronics) - Masters Degree, National University of Singapore
  • B.Sc in Mechanical Engineering - Bachelor Degree, Bangladesh University of Engineering & Technology, Dhaka

Tanveer Saleh (Prof. Dr.)

Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING

Other's position:

Head, Kulliyyah of Engineering


tanveers@iium.edu.my
5709


Expert Profile


Dr Tanveer Saleh has been in the Department of Mechatronics Engineering at the International Islamic University Malaysia since 2012. He completed his Ph.D in 2009 at the National University of Singapore.
He worked in NUS spin-off company, Mikrotools Pte Ltd. for three years. He also worked at the University of British Columbia, Canada, as a postdoctoral fellow for more than one year before he joined IIUM.


Area of Specialisation


  • Engineering Tech ~ Engineering And Technology ~ Industrial and Manufacturing Engineering ~ Machining/Rapid Prototyping and Tooling (Including Standard Supporting Technologies of Precision Machining and Micro Machining) - Hybrid machining
  • Engineering Tech ~ Engineering And Technology ~ Industrial and Manufacturing Engineering ~ Machining/Rapid Prototyping and Tooling (Including Standard Supporting Technologies of Precision Machining and Micro Machining) - Manufacturing Automation
  • Engineering Tech ~ Engineering And Technology ~ Industrial and Manufacturing Engineering ~ Machining/Rapid Prototyping and Tooling (Including Standard Supporting Technologies of Precision Machining and Micro Machining) - Non-conventional machining
  • Engineering Tech ~ Engineering And Technology ~ Industrial and Manufacturing Engineering ~ Machining/Rapid Prototyping and Tooling (Including Standard Supporting Technologies of Precision Machining and Micro Machining) - Artificial intelligence in manufacturing


Professional Membership


  • 2014 - 2022: Member of Profesional Body / Association: (Senior Member of IEEE), Institute of Electrical and Electronics Engineers (IEEE)
  • 2015 - 2022: Member of Profesional Body / Association: (Member (CEng)), Institute of Mechanical Engineers
  • 2022 - 2022: Member of Profesional Body / Association: (Professional Engineer (Ir.)), Board of Engineers Malaysia


Teaching Responsibilities


DESIGN OF MACHINE ELEMENTS 2018/2019 2017/2018 2016/2017 2015/2016 2014/2015
ENGINERING DESIGN 2020/2021 2019/2020 2018/2019 2017/2018
FUNDEMENTALS OF ROBOTICS 2023/2024
INDUSTRIAL AUTOMATION 2023/2024 2022/2023 2021/2022 2015/2016 2014/2015 2013/2014 2012/2013
INTERGRATED DESIGN PROJECT 2021/2022 2020/2021 2019/2020 2018/2019
MACHINE DESIGN 2018/2019
MECHATRONIC SYSTEM DESIGN 2015/2016
MECHATRONICS ENGINEERING LAB I 2017/2018
MECHATRONICS ENGINEERING LAB II 2022/2023 2021/2022 2016/2017 2014/2015 2013/2014 2012/2013
MECHATRONICS LAB III 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020
MECHATRONICS SYSTEM DESIGN 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017
PROJECT 1 2021/2022 2020/2021 2019/2020 2018/2019
Project II 2021/2022 2020/2021 2019/2020
ROBOTICS 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020
THEORY OF MACHINES AND MECHANISMS 2017/2018 2016/2017 2013/2014 2012/2013


Supervision


Fuzzified Deep Reinforcement Learning-Based Evacuation Model With Early Warning Capabilities Of Crowd Disaster.
Ph.D Completed 2023 Co-supervisor
Study Of The Tip Bending Process Of Vertically Aligned Carbon Nanotubes.
Ph.D Completed 2018 Main Supervisor
Investigation Of Energy Efficient Magnetorheological Fluid (Mrf) Damper For Application In Prosthetic Limb.
Ph.D Completed 2018 Co-supervisor
Investigation On Laser And Micro Electro Discharge Machining (U-Edm) Based Hybrid Micromachining.
Ph.D In Progress Main Supervisor
Modelling And Simulation Of Hybrid Laser Beam Micromachining (Lbmm) And Micro Electrical Discharge Machining (Μedm) For Advance Microfabrication Processes.
Ph.D In Progress Main Supervisor
Enhance The Overall Performance Of Brayton Cycling In Marine Propulsion Plant Using Nanofluids.
Ph.D In Progress Co-supervisor
Ann Modeling Of Laser-Micro Electro Discharge Machining Based Hybrid Microdrilling Process.
Master Completed 2023 Main Supervisor
Application Of Coactive-Anfis To Predict Micro-Edm Performances.
Master Completed 2022 Main Supervisor
An Ultrasonic Vibration Device For Micro Electro-Discharge Machining.
Master Completed 2022 Main Supervisor
Study Of Carbon Nanotube Forests Based Two Degree Of Freedom Angle Sensor.
Master Completed 2019 Main Supervisor
A Hexapod Robotic Platform For Miniature Drilling Operations.
Master Completed 2019 Main Supervisor
Path Planning Algorithms For Industrial Automated Guided Vehicles (Agvs).
Master Completed 2019 Main Supervisor
A Hybrid System Combining Rapid Prototyping And Cnc Machining Operation.
Master Completed 2018 Main Supervisor
Modelling And Optimization Of Nano Powder Mixed Micro Wedm Process Using Artificial Neural Networks And Genetic Algorithm.
Master Completed 2018 Main Supervisor
Micro-Mechanical Bending Process Of Vertically Aligned Carbon Nanotubes For Fabricating Displacement Sensor.
Master Completed 2016 Main Supervisor
Development And Performance Comparison Of An Assistive Hand Based On Shape Memory Alloy And Linear Actuator.
Master Completed 2015 Main Supervisor
Bandwith Enhancement Of Piezoelectric Based Vibration Energy Harvester Using Magnetic Oscillators.
Master Completed 2015 Co-supervisor
Enhancing Μ-Wedm And Edm (Wire/Electro-Discharge Machining) Of Doped Silicon.
Master Completed 2014 Main Supervisor
Modelling And Optimization Of Micro Electro-Discharge Machining Process Using Machine Learning.
Master In Progress Main Supervisor
Water Quality Monitoring Of Sungai Pusu Using Iot And Machine Learning.
Master In Progress Co-supervisor


Research Projects


Completed
2020 - 2021 Development of a desktop uEDM machine for microhole fabrication
2020 - 2021 Characterization of new type of modular uEDM power supply
2019 - 2019 Development of an ultrasonic vibration device for uEDM operation
2018 - 2023 Modeling and Experimental Investigation on Laser-micro Electro discharge machining based hybrid microfabrication process
2018 - 2018 Micro Hole Machining for Laser Application
2018 - 2022 Fundamental Investigation on Laser-EDM Based Micromachining Technology (AOARD GRANT)
2017 - 2017 Design of the 4th Axis for DT-110 Multipurpose Machinetool
2016 - 2019 Development of a Prototype of Carbon Nanotube based Angular Sensor
2014 - 2017 Development of a 3-D ?-Patterning Process for Vertically Aligned Cardon Nanotubes (VACNT) for New Types of Sensor Fabrication
2014 - 2017 Investigation on the Effect Of "Nano-Powder" in Micro-Wire Electro-Discharge Machining (?-WEDM) Process for Fabricating Micro Actuators with Nanometric Mirror Surface
2014 - 2016 Design and Development of Shoe-Tying Robotic Hands for Prosthetics and Humanoid Application
2013 - 2015 Development of a BCI (Brain Computer Interface) and Shape Memory Alloy Based (SMA) Assistive Hand for Disabled People
2013 - 2014 MEMS Based electrostatic Acutator Development for 2 x 2 Optomechanical Swithch
2013 - 2016 Parametric Investigation to Optimize Dynamic Range of Magnetorheological Damper for Prosthetic Limbs
2013 - 2016 Novel Real-Time Snatch Robbery Detection And Prediction For Smart Surveillance System
2013 - 2016 Study of Effects of Patterning Process on Carbon Nanotube(CNT) Forest Surface
On-Going
2022 - Present Intelligent Robot-Assisted Emergency: Prototype Upscaling and Field Testing
2022 - Present Development of Artificial Intelligence-based predictive model for the micro electro-discharge machining (Micro EDM) process carried out in DT110
2022 - Present Prototyping of a hybrid machine combining laser beam micromachining (LBMM) and micro electro-discharge machining (uEDM)
2019 - Present Investigation on the energy saving capability of a Variable Inertia Magneto Rheological (MR) Flywheel.
2019 - Present Pulsed Eddy Current System Prototype for Assessment of Under-Insulation Corrosion
2018 - Present IIUM-UNIVERSITY OF LIMOGES(FRANCE) JOINT COLLABORATION PROGRAMME
2014 - Present Harmony Search Algorithm: Study and Analysis towards Self-tuning Intelligent Control for Precise Positioning of Piezo-actuated Stage
2014 - Present AUTONOMOUS SYSTEMS AND ROBOTICS RESEARCH UNIT
2013 - Present Lard and Alcohol Detection in Food and Beverages using Newly Developed Portable Near Infrared Microspectrometer


Award & Recognition


27 Jul, 2022 High Impact Responsible Innovation Award (Science and Technology) - Others University
30 May, 2022 High Impact Responsible Innovation Award (Sciences and Technology Category) - Others University
30 May, 2022 Product Innovation and Commercialisation Award - Others University
30 May, 2022 Top 50 Contributors to IIUM'S Research Performance - Others University
12 Feb, 2022 Outstanding Educator Award - IEEE Robotics and Automation Society Malaysia Chapter National
12 Feb, 2022 Outstanding Volunteer Award (Individual) - IEEE Robotics and Automation Society Malaysia Chapter National
04 Dec, 2021 Silver Medal - 2021 Seoul International Invention Fair International
29 Oct, 2021 Gold Medal - Malaysia Technology Expo International
29 Oct, 2021 Special Award - TURKISH INVENTORS AND INNOVATORS NETWORK International
01 Jul, 2019 Best Researcher Award Kulliyyah Level - KOE, IIUM KCDIO
01 Jul, 2018 Postgraduate Supervision Excellence Award (2018) - KOE, IIUM KCDIO
19 Feb, 2013 Bronze Medal - IRIIE 2013 organizing committee University


Publications


Article

2023 Experimental modeling techniques in electrical discharge machining (EDM): a review. International Journal of Advanced Manufacturing Technology, () pp.
2023 Review of intelligence for additive and subtractive manufacturing: current status and future prospects. Micromachines, 14 (3) pp. 1-53
2023 Surface roughness modelling of the micromechanically patterned CNT forests. Micro and Nanosystems, () pp. 1-10
2022 Application of CANFIS for modelling and predicting multiple output performances for different materials in μEDM. CIRP Journal of Manufacturing Science and Technology, 37 () pp. 528-546
2022 Mechatronics Engineering Department Newsletter - Risalah Issue 2. Mechatronics Engineering Department Newsletter - Risalah Issue 2 October 2022, (2) pp.
2022 Non‑traditional machining techniques for silicon wafers. The International Journal of Advanced Manufacturing Technology, 2022 (121) pp. 29-57
2022 Wearable thermoelectric generator with vertically aligned PEDOT:PSS and carbon nanotubes thermoelements for energy harvesting. International Journal of Energy Research, () pp.
2021 A machine learning-based classification model to identify the effectiveness of vibration for µEDM. Alexandria Engineering Journal, () pp. 1-11
2021 Dual-stage artificial neural network (ANN) model for sequential LBMM-μEDM-based micro-drilling. The International Journal of Advanced Manufacturing Technology, () pp. 1-24
2021 Effect of laser parameters on sequential laser beam micromachining and micro electro-discharge machining. The International Journal of Advanced Manufacturing Technology, 114 () pp. 709-723
2021 Heat-assisted μ-electrical discharge machining of silicon. International Journal of Advanced manufacturing Technology, () pp. 1-12
2019 A review on micro-patterning processes of vertically aligned carbon nanotubes array (VACNTs Array). Current Nanoscience, 15 (4) pp. 328-353
2019 An ex-situ method to convert vertically aligned carbon nanotubes array to horizontally aligned carbon nanotubes mat. Materials Research Express, 6 (2) pp. 1-8
2019 Artificial neural network modelling and analysis of carbon nanopowder mixed micro wire electro discharge machining of gold coated doped silicon. International Journal of Materials Engineering Innovation, 10 (4) pp. 346-363
2019 Modular robotic platform for autonomous machining. International Journal of Advanced Manufacturing Technology, () pp.
2019 PDMS-based dual-channel pneumatic micro-actuator. Smart Materials and Structures, 28 (11) pp. 1-11
2018 Combination of fused deposition modelling with abrasive milling for attaining higher dimensional accuracy and better surface finish. IIUM Engineering Journal, 19 (2) pp. 221-231
2018 Copper–cobalt thermoelectric generators: power improvement through optimized thickness and sandwiched planar structure. IEEE Transactions on Electron Devices, 66 (8) pp. 3459-3465
2018 Editorial: Advanced nanomaterial synthesis and their applications for engineering research. Current Nanomaterials, xx (xx) pp. 1
2018 Optical characterization of tip bended vertically aligned carbon nanotubes array. Chemical Physics Letters, 711 () pp. 37-41
2018 Towards achieving nanofinish on silicon (Si) wafer by μ-wire electro-discharge machining. International Journal of Advanced Manufacturing Technology, 99 (9) pp. 3005-3015
2017 Comparative study of conventional and magnetically coupled piezoelectric energy harvester to optimize output voltage and bandwidth. Microsystem Technologies, 23 (7) pp. 2663-2674
2017 Concept of a programmable fixture for 3-Axis CNC. International Journal of Engineering Materials and Manufacture, 2 (3) pp. 49-57
2017 Development of localised electrochemical deposition control system for fabricating micro EDM electrode. International Journal of Machining and Machinability of Materials, 19 (3) pp. 260-276
2017 Empirical modeling of micromechanical bending process of vertically aligned carbon nanotube forest using response surface methodology. Cogent Engineering, 4 (1) pp. 1-13
2017 Optical anisotropy in micromechanically rolled carbon nanotube forest. Electronic Materials Letters, 13 (5) pp. 442-448
2016 A hybrid machining process combining micro-EDM and laser beam machining of nickel-titanium based shape memory alloy. Materials and Manufacturing Processes, 31 (4) pp. 447-455
2016 Enhancement of reflectance of densified vertically aligned carbon nanotube forests. Carbon Letters, 18 () pp. 67-70
2016 Investigation of anisotropic reflectance from densified arrays of vertically aligned carbon nanotube forests (VACNTs). Chemical Physics Letters , 658 () pp. 343-346
2016 Micro glow plasma for localized nanostructural modification of carbon nanotube forest. Applied Physics Letters, 109 () pp. 081604-1
2016 Study on micro-patterning process of vertically aligned carbon nanotubes (VACNTs). Fullerenes, Nanotubes and Carbon Nanostructures, () pp. 88-99
2015 A piezoelectric based energy harvester with magnetic interactions: modelling and simulation. Advanced Materials Research, 1115 () pp. 549-554
2015 Development of a Shape Memory Alloy (SMA) based assistive hand. Advanced Materials Research, 1115 () pp. 454-457
2015 Development of an angle sensor using optical polarizer. ARPN Journal of Engineering and Applied Sciences, 10 (23) pp. 17416-17420
2015 Experimental study on improving μ- WEDM and μ-EDM of doped silicon by temporary metallic coating. International Journal of Advanced Manufacturing Technology, 78 () pp. 1651-1663
2015 Remote interior temperature control of parked vehicles. Advanced Materials Research, 1115 () pp. 494-498
2014 Enhancing μ-wedming (wire electro-discharge machining) of polished silicon wafer by conductive coating. Journal of Manufacturing Technology Research, 5 (1-2) pp. 1-17
2014 Micropatterning polypyrrole conducting polymer by pulsed electrical discharge. Macromolecular Materials and Engineering, 299 (2) pp. 198-207
2013 Dry micro-electro-discharge machining of carbon-nanotube forests using sulphur-hexafluoride. Carbon, 52 () pp. 288-295
2013 High-power MEMS switch enabled by carbon-nanotube contact and shape-memory-alloy actuator. Physica Status Solidi (A) Applications and Materials, 210 (4) pp. 631-638
2012 Transforming carbon nanotube forest from darkest absorber to reflective mirror. Applied Physics Letter, 101 (6) pp. 061913-1
2011 Field-emission-assisted approach to dry micro-electro-discharge machining of carbon-nanotube forests. Journal of Applied Physics, 110 (10) pp.
2011 In-process truing for ELID (Electrolytic In-Process Dressing) grinding by pulsewidth control. IEEE Transactions on Automation Science and Engineering, 8 (2) pp. 338-346
2010 A multiprocess machine tool for compound micromachining. International Journal of Machine Tools and Manufacture, 50 (4) pp. 344-356
2010 Development, modeling, and experimental investigation of low frequency workpiece vibration-assisted micro-EDM of tungsten carbide. Journal of Manufacturing Science and Engineering, 135 (2) pp. 054503-1
2010 Efficient dressing of the wheel in ELID grinding by controllable voltage with force feed back. International Journal of Advanced Manufacturing Technology, 46 (1-4) pp. 123-130
2010 Modelling for fabrication of microelectrodes by localized electrochemical deposition for micro-electrodischarge machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (11) pp. 1741-1755
2008 Development of an on-machine profile measurement system in ELID grinding for machining aspheric surface with software compensation. International Journal of Machine Tools and Manufacture, 48 (7-8) pp. 887-895
2007 Development and performance evaluation of an ultra precision ELID grinding machine. Journal of Materials Processing Technology, 192/93 () pp. 287-291
Conference or Workshop Item

2023 Implementation of IR 4.0 and IIoT in various research and TnL activities at IIUM. In: International Conference ICIRIE-2023,
2022 Gesture based control for Mitsubishi Industrial Robots. In: 8th International Conference on Mechatronics Engineering (ICOM 2022),
2022 Three DoF articulated robotic manipulator for teaching and learning. In: 8th International Conference on Mechatronics Engineering (ICOM 2022),
2021 Development of micro-EDM machine with process parameter control for EDM drilling. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE’21),
2021 Effect of process parameters on the laser microdrilling performance of stainless steel, aluminium and copper. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE’21),
2021 Micro electrical discharge machining. In: Two Weeks Faculty Development Programme on Manufacturing Technology Research and Management (MTRM),
2021 Microdrilling using laser-uEDM based sequential process. In: International webinar on “Recent Advancements inMechanical Engineering,
2020 Micro-patterning of CNT Forest. In: Invited Lecture,
2020 Micropatterning of vertically aligned carbon nanotubes and its remarkable optical transformation. In: International Conference on Advancements in Mechanical Engineering,
2019 Development and performance evaluation of modular RC-based power supply for micro-EDM. In: 7th IEEE International Conference on Mechatronics Engineering - ICOM'19,
2019 Development of an active fixture for ultrasonically assisted micro electro-discharge machining. In: 7th IEEE International Conference on Mechatronics Engineering - ICOM'19,
2019 Hexapod robot for autonomous machining. In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018),
2019 Micromachining using fiber laser for various metallic workpieces. In: FEIIC - International Conference on Engineering Education and Research FICEER 2019,
2019 Prototype of single degree of freedom optical resolver. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18),
2017 An assistive robotic hand based on human computer interface (HCI) and shape memory alloy (SMA) actuator. In: 9th International Conference on Robotic, Vision, Signal Processing and Power Applications Empowering Research and Innovation,
2017 An experimental investigation on the effect of nanopowder for micro-wire electro discharge machining of gold coated silicon. In: Advances in Materials and Processing Technologies, 2016 (AMPT 2016),
2017 An improved machining process of polished silicon using nano powder mixed micro-wire electro discharge machining. In: 2017 World Congress on Micro and Nano Manufacturing,
2017 Design and development of a hybrid machine combining rapid prototyping and CNC milling operation. In: Advances in Materials and Processing Technologies, 2016 (AMPT 2016),
2017 Improvement of dimensional accuracy of 3-D printed parts using an additive/subtractive based hybrid prototyping approach. In: 6th International Conference on Mechatronics - ICOM'17,
2016 An experimental investigation of gold coated silicon using nano powder mixed micro-wire electro discharge machining. In: Advances in Materials and Processing Technologies, 2016 (AMPT 2016),
2016 Anisotropic carbon nanotube for new type of angle sensor development. In: International Conference on Advances in Functional Materials (AFM 2016),
2015 Application of VACNTs in MEMS devices. In: World Congress on Microscopy: Instrumentation, Techniques and Applications in Life Sciences and Materials Sciences (WCM 2015) ,
2015 Development and performance evaluation of a linear actuator based Wwarable assistive device. In: Asian Control Conference (ASCC 2015),
2015 Development and performance evaluation of a linear actuator based wearable assistive device. In: 2015 10th Asian Control Conference (ASCC 2015),
2015 Optimal particle ratio to maximize the dynamic range of Magnetorheological Fluid (MRF) damper for prosthetic limb. In: 2015 10th Asian Control Conference (ASCC 2015),
2014 Improving μ-wire electro-discharge machining operation of polished silicon wafer by conductive coating. In: 9th International Conference on MicroManufacturing (ICOMM 2014),
2014 Inner ambient control of the parked vehicle in a hot sunny day by remote access. In: International Research, Invention and Innovation Exhibition 2014 (IRIIE2014),
2014 Micro-Mechanical Bending (M2 B) method for Carbon Nanotube (CNT) based sensor fabrication . In: Smart Instrumentation, Measurement and Applications (ICSIMA), 2014 IEEE International Conference on,
2014 Piezoelectric based vibration energy harvester with tip attraction magnetic force: modeling and simulation . In: Mathematics and Computers in Science and Industry (MCSI),
2013 µ-Patterning of Carbon Nanotube patterning of Carbon Nanotube (CNT) forest for MEMS applications . In: 5th International Conference on Mechatronics (ICOM'13),
2013 A new μ-patterning method for Carbon Nanotube (CNT) forest and its remarkable optical transformation. In: 16th International Conference on Advances in Material and Processing Technology AMPT 2013,
2012 High-precision dry micro-electro-discharge machining of Carbon-Nanotube forests with ultralow discharge energy . In: International Conference on Micro Electro Mechanical Systems (MEMS),
2004 Design of a gyroscopically stabilized single-wheeled robot. In: Conference on Robotics, Automation and Mechatronics,
Book

2021 Micro Electro-Fabrication. Elsevier, ISBN: 9780128200490
Book Section

2021 Electrochemical machining for microfabrication. In: Elsevier, ISBN: 9780128200490, pp. 339-386
2020 ELID grinding for final finishing operation. In: Springer Nature, ISBN: 978-3-030-43311-6, pp. 129-145
2019 Near net shape machining by Micro-EDM and Micro-WEDM. In: Springer, ISBN: 978-981-13-3073-5, pp. 231-264
2017 ELID grinding and EDM for finish machining. In: Elsevier Inc., ISBN: 978-0-12-803249-7, pp. 364-407
2015 Electro-discharge machining for non-metal based fabrication process. In: Nova Publishers , ISBN: 9781634835985, pp. 383-424
2015 Electro-discharge machining for non-metal based fabrication process. In: Nova Publishers , ISBN: 9781634835985, pp. 383-424
2014 Electrolytic In-Process Dressing (ELID) grinding for nano-surface generation. In: Elsevier, ISBN: 9780080965321, pp. 483-522
Monograph

2019 Development of a prototype of carbon nanotube-based angular sensor. In: ,
2017 Investigation on the effect of "nano-powder" in micro-wire electro-discharge machining (μ-WEDM) process for fabricating micro actuators with nanometric mirror surface. In: ,