Staff Directory
Academic Qualification
- Doktor Falsafah (Kejuruteraan Mikro dan Nanoelektronik) - Doctor of Philosophy, Universiti Kebangsaan Malaysia (UKM)
- Master of Science in Advanced Manufacturing Technology - Masters Degree, University of Portsmouth
- B. Eng. (Hons) in Electronic & Electrical Engineering - Bachelor Degree, University of Portsmouth
Nadzril Bin Sulaiman (Dr.)
Assistant Professor
IIUM Gombak Campus
KULLIYYAH OF ENGINEERING
nadzril@iium.edu.my
NA
Expert Profile
Dr. Nadzril obtained his Bachelor of Engineering (Hons) in Electronic and Electrical Engineering from the University of Portsmouth, UK and then proceed to obtain his Master of Science in Advanced Manufacturing Technology from the same university. He later continued his studies and successfully completed the Degree of Doctor of Philosophy in Microengineering and Nanoelectonics from the Institute of Microengineering and Nanoelectronics (IMEN), University Kebangsaan Malaysia. Currently, he serve as an academic staff at the Department of Mechatronics Engineering, Kulliyyah of Engineering, IIUM. His research interest includes micro and nanofabrication technology, MEMS/NEMS devices, energy harvesting devices, LoC, wearable electronics, and electronics instrumentation.
Area of Specialisation
- Engineering Tech ~ Engineering And Technology ~ Electrical and Electronic Engineering ~ Device Fabrication and Process
Professional Membership
- 2015 - 2035: Member of Profesional Body / Association: (Senior Member), Institute of Electrical and Electronics Engineers (IEEE)
- 2016: Member of Profesional Body / Association: (Member (174516)), International Association of Engineers (IAENG)
- 2016: Member of Profesional Body / Association: (Graduate Engineer (GE137973A)), Board of Engineers Malaysia (BEM)
- 2024: Member of Profesional Body / Association: (Member (GT24040277)), Lembaga Teknologis Malaysia
Teaching Responsibilities
ANALOG ELECTRONICS | 2014/2015 2013/2014 |
CONTROL SYSTEM DESIGN | 2017/2018 |
ELECTRICAL MACHINES | 2024/2025 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 |
ELECTRONIC INSTRUMENTATION AND MEASUREMENT | 2002/2003 |
FINAL YEAR PROJECT 1 | 2023/2024 |
INSTRUMENTATION AND CONTROL | 2017/2018 2015/2016 2014/2015 2013/2014 2012/2013 |
INSTRUMENTATION AND MEASUREMENTS | 2017/2018 2016/2017 2015/2016 2014/2015 2004/2005 2003/2004 2002/2003 |
INSTRUMENTATION AND MEASUREMENTS (LAB) | 2004/2005 2003/2004 |
MECHATRONICS ENGINEERING LAB I | 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2013/2014 2012/2013 |
MECHATRONICS ENGINEERING LAB II | 2017/2018 |
MECHATRONICS INTERFACING LAB | 2022/2023 2021/2022 2020/2021 2019/2020 |
MECHATRONICS LAB III | 2017/2018 |
MECHATRONICS SYSTEM INTEGRATION | 2023/2024 2022/2023 |
MECHATRONICS SYSTEM LAB | 2022/2023 |
MECHATRONICS SYSTEMS LAB | 2024/2025 2023/2024 2022/2023 |
MECHATRONICS WORKSHOP | 2016/2017 |
MICROELECTROMECHANICAL SYSTEMS | 2023/2024 2018/2019 |
MICROPROCESSOR BASED SYSTEMS | 2017/2018 2016/2017 |
PROJECT 1 | 2021/2022 2020/2021 2019/2020 2018/2019 2015/2016 2014/2015 2013/2014 |
PROJECT II | 2023/2024 2020/2021 2019/2020 |
SEMINAR | 2005/2006 2004/2005 |
VEHICLE ELECTRICAL SYSTEMS | 2005/2006 |
Supervision
Pulsed Eddy Current Sensors For Corrosion Assessment.
Master
Completed
2021
Co-supervisor
|
Development Of An Energy Harvesting Device By Using Piezoelectric Materials And Solar At Highway Road.
Master
Completed
2018
Main Supervisor
|
Fabrication Of Micro Search Coil Magnetometer For Magnetic Field Measurement Using Combined Techniques.
Master
Completed
2017
Main Supervisor
|
Core-Shell Ag@Pt Metalic Nanoparticles As A Targeted Drug Carrier For Cancer Treatment.
Master
Completed
2017
Main Supervisor
|
Analysis Of Micro Coil Geometrical Features For Mems-Based Fluxgate Magnetometer.
Master
Completed
2017
Co-supervisor
|
Research Projects
Completed
2014 - 2017 | Analysis of Micro Coil Geometric Features for MEMS-Based Fluxgate Magnetometer |
2014 - 2018 | Novel Method in Fabrication of Micro Magnetometer for Low Magnetic Field Detection |
2004 - 2006 | Automic PCB Drilling Machine |
2004 - 2017 | Semi-Automatic PCB Drilling Machine |
2004 - 2017 | Challenges and Solutions in the Teaching of Instrumentation and Measurements for Undergraduate Student |
On-Going
2018 - Present | A New Biometrics Authentication Method Based on Fingertips Epidermis Layer Thickness Measurement |
Publications
Article
Conference or Workshop Item
2022 | Analysis of non-invasive fingerprint thickness based authentication method utilizing near infrared spectroscopy. In: Third International Conference on Emerging Electrical Energy, Electronics and Computing Technologies 2021, |
2022 | Tunnel-magnetoresistive-based pulsed Eddy current probe for inspection of corrosion under insulation. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021) 21/06/2021 - 23/06/2021, |
2020 | Overview on fingerprinting authentication technology. In: 5th International Conference on Electrical, Control and Computer Engineering, InECCE 2019, |
2020 | Overview on fingerprinting authentication technology. In: 5th International Conference on Electrical, Control and Computer Engineering, InECCE 2019, |
2019 | Simulation and fabrication of micro magnetometer using flip-chip bonding technique. In: 5th International Conference on Computational Science and Technology, ICCST 2018, |
2019 | Simulation and fabrication of micro magnetometer using flip-chip bonding technique. In: 5th International Conference on Computational Science and Technology, ICCST 2018, |
2019 | Simulation and fabrication of micro magnetometer using flip-chip bonding technique. In: 5th International Conference on Computational Science and Technology (ICCST 2018), |
2017 | A novel approach of core-shell Ag@Pt nanoparticles production. In: 5th International Conference on Nanostructures, Nanomaterials and Nanoengineering, ICNNN 2016 and International Conference on Materials Technology and Applications, ICMTA 2016, |
2017 | Fabrication of micro magnetometer using flip-chip bonding technique. In: The IRES International Conference, |
2017 | Flip-chip bonding fabrication technique. In: 6th International Conference on Mechatronics 2017, |
2017 | Simulation and fabrication of micro magnetometer using flip-chip bonding technique. In: The Second International Conference On Computational Science And Engineering 2017 (ICCSE 2017), |
2016 | Anticancer peptides derived from Supermeal worm, Zophobas morio. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), |
2016 | Effect of some parameters in the synthesis of silver nanoparticles and its evaluation as antimicrobes . In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), |
2016 | Modelling and optimization of process parameters for silver nanoparticles synthesis: A comparison between response surface methodology and artificial neural network. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), |
2016 | Simulation analysis of micro coils for the fabrication of micro-scaled search coil magnetometer. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016), |
2015 | Investigation of anticancer peptides from zophobas moria fabricus. In: Asian Congress on Biotechnology 2015 (ACB 2015), |
2012 | Effect of varying thickness of electroplated NiFe film on magnetic properties. In: 2012 IEEE International Conference on Semiconductor Electronics (ICSE), |
2010 | Design analysis of single layer coupled coils. In: 2010 IEEE International Conference on Semiconductor Electronics (ICSE), |