Staff Directory
Academic Qualification
- Ph.D in Metallurgy and Ceramic Science - Doctor of Philosophy, Tokyo Institute of Technology
- Master of Engineering (Metallurgy and Ceramic Science) - Masters Degree, Tokyo Institute of Technology
- Bachelor of Engineering - Bachelor Degree, Tokyo Institute of Technology
Mohd. Hanafi bin Ani (Assoc. Prof. Dr.)
Associate Professor
IIUM Gombak Campus
KULLIYYAH OF ENGINEERING
mhanafi@iium.edu.my
4420
Expert Profile
Assoc. Prof. Dr. Mohd Hanafi Ani obtained the Bachelor of Engineering (Metallurgy), Master of Engineering (Metals and Ceramics) and Doctor of Engineering in Materials Engineering from Tokyo Institute of Technology, Japan.
He has served as a faculty member at the Department of Manufacturing and Materials, Kulliyyah of Engineering, IIUM since 2003. He is actively involved in research on advanced materials, securing research grants, and has authored and co-authored more than 120 technical papers in refereed journals.
He has served as a faculty member at the Department of Manufacturing and Materials, Kulliyyah of Engineering, IIUM since 2003. He is actively involved in research on advanced materials, securing research grants, and has authored and co-authored more than 120 technical papers in refereed journals.
Area of Specialisation
- Engineering Tech ~ Engineering And Technology ~ Metallurgy ~ Metal - High temperature oxidation, corrosion, electrochemical, electroceramic
- Natural Science ~ Material Sciences ~ Advanced Materials ~ Electro-Active Ceramics - Electronics Materials, Functional Materials
- Natural Science ~ Material Sciences ~ Advanced Materials ~ Other Advanced Materials n.e.c. - Graphene, Graphite and CNTs
- Engineering Tech ~ Applied Sciences And Technologies ~ Engineering Materials ~ Ceramics
Professional Membership
- 2011: Member of Profesional Body / Association: (Member), Board of Engineers
- 2011: Member of Profesional Body / Association, Institute of Materials Malaysia
- 2012: Member of Profesional Body / Association: (Member), Japan Institute of Metals
- 2013: Member of Profesional Body / Association: (Member), Electroactive Materials Society
- 2013: Member of Profesional Body / Association, Institute of Engineers Malaysia
- 2018: Member of Profesional Body / Association: (Member), Malaysian Nanotechnoloy Association
Teaching Responsibilities
Advanced Metallic Materials | 2023/2024 2021/2022 2020/2021 |
CORROSION | 2024/2025 2023/2024 |
CORROSION AND DEGRADATION | 2024/2025 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2015/2016 |
CORROSION PROCESSES AND PROTECTION | 2023/2024 2019/2020 |
ELECTROCERAMICS | 2016/2017 2015/2016 2013/2014 2012/2013 2011/2012 2010/2011 |
ELECTRON MICROSCOPY | 2017/2018 |
ENGINEERING MANAGEMENT | 2010/2011 |
ENGINEERING MATERIALS | 2004/2005 2003/2004 |
ENGINEERING MATERIALS (LAB) | 2004/2005 |
EXTRACTIVE AND PHYSICAL METALLURGY | 2024/2025 2023/2024 2022/2023 2019/2020 2018/2019 2017/2018 |
FAILURE ANALYSIS OF MATERIALS | 2013/2014 2011/2012 2010/2011 2009/2010 |
FINAL YEAR PROJECT 2 | 2024/2025 |
FINAL YEAR PROJECT I | 2019/2020 2018/2019 |
FINAL YEAR PROJECT II | 2024/2025 2023/2024 2022/2023 2021/2022 2019/2020 |
FINE CERAMICS | 2009/2010 |
HEAT TREATMENT | 2012/2013 |
MATERIAL AND PROCESSES 2 | 2011/2012 2010/2011 |
MATERIALS ENGINEERING LAB 4 | 2023/2024 |
MATERIALS ENGINEERING LAB IV | 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2011/2012 2010/2011 2009/2010 |
MECHANICAL FORMING AND MACHINING OF MATERIALS | 2012/2013 2011/2012 2010/2011 2009/2010 |
METALLIC MATERIALS | 2011/2012 |
NDT AND EVALUATIONS | 2015/2016 |
NONDESTRUCTIVE TESTING OF MATERIALS | 2018/2019 |
PHYSICAL METALLURGY | 2017/2018 2016/2017 2015/2016 |
PRODUCTION OF FERROUS & NON FERROUS METALS | 2009/2010 |
PRODUCTION OF FERROUS AND NON-FERROUS | 2009/2010 |
PROJECT II | 2018/2019 2017/2018 2016/2017 |
SEMINAR | 2005/2006 2004/2005 |
SOLID STATE ENGINEERING AND CRYSTALLOGRAPHY | 2021/2022 2017/2018 |
SOLID STATE PHYSICS AND CRYSTALLOGRAPHY | 2017/2018 2013/2014 |
SPECIAL TOPICS IN ADVANCED MANUF. ENGIN | 2016/2017 |
SPECIAL TOPICS IN AUTOMOTIVE ENGINEERING II | 2016/2017 |
SUSTAINABLE DEVELOPMENT: ISSUES, PRINCIPLES AND PRACTICES | 2023/2024 |
THERMODYNAMICS OF MATERIALS | 2022/2023 2021/2022 2020/2021 2019/2020 |
TRANSPORT PHENOMENA | 2020/2021 |
Supervision
Effects Of Transport Processes To The Deposition And Quality Of Atmospheric Pressure Chemical Vapour Deposited Graphene.
Ph.D
Completed
2021
Main Supervisor
|
Synthesis And Characterization Of Graphene Grown By Open Flame Deposition Technique.
Ph.D
Completed
2019
Main Supervisor
|
Electroplated Copper Coatings On 304l And 316l Stainless Steels For Mitigation Of Metal Dusting Corrosion In Methane/Hydrogen Environment.
Ph.D
Completed
2019
Co-supervisor
|
Synthesization And Characterization Of Hybrid Zno-Sio2 Nanoparticles For Anti-Corrosion Nanocoating Of Medium Carbon Steel
.
Ph.D
Completed
2018
Member Supervisory Committee
|
Investigation Of Microstructural And Corrosion Behaviour Of Malay Keris.
Ph.D
Completed
2018
Main Supervisor
|
Rechargeable Ni-Zn Microbatteries Employing Mcm-41 Separator.
Ph.D
Completed
2018
Co-supervisor
|
تصميم وحدات دراسية لمقرر النحو لطلبة معهد تعليم اللغة العربية بالجامعة الإسلامية بالمدينة المنورة: برنامج مقترح
. Designing Educational Units Of Arabic Grammar Course For Learners Of Arabic Teaching Institute Of Islamic University Of Medina : A Proposed Programme.
Ph.D
Completed
2018
Co-supervisor
|
Development Of Carbon-Infiltrated Biochar Using Oil Palm Empty Fruit Bunch As An Alternative Source Of Energy.
Ph.D
Completed
2016
Co-supervisor
|
Development Of A Leclanche Cell For Microsystem Applications.
Ph.D
Completed
2014
Co-supervisor
|
Assessment Of Corrosion On Buried Metallic Pipeline Induced By Ac Interference Below High Transmission Line.
Master
Completed
2022
Main Supervisor
|
Electrochemical Characteristics Of Carbon Filled Algae Biofilm.
Master
Completed
2021
Co-supervisor
|
Influence Of Gas Flow Inside Circular Tube Using Computational Fluid Dynamics For Graphene Synthesis Via Chemical Vapour Deposition.
Master
Completed
2021
Co-supervisor
|
A Study On The Effects Of Gas Composition And Biased Substrate Towards The Quality Of Cvd Grown Graphene.
Master
Completed
2019
Main Supervisor
|
Development Of Conductive Polymer Composites From Polylactic Acid/Thermo Plastic Polyurethane Blends Filled With Graphene Nanoplatelets.
Master
Completed
2019
Co-supervisor
|
The Influence Of Deposition Parameters And Crystallinity Of Copper Substrate On The Formation Of Apcvd Derived Graphene.
Master
Completed
2018
Main Supervisor
|
Effects Of Dissolved Hydrogen On High Temperature Corrosion Resistance Of Chromia Scale.
Master
Completed
2018
Main Supervisor
|
Fabrication And Characterization Of Zno Thin Film Memristor Using Ultra Dilute Electrodeposition Method.
Master
Completed
2016
Main Supervisor
|
Synthesis And Characterization Of Au/Zn0/Cu Thin Film Memristor.
Master
Completed
2014
Main Supervisor
|
Reduction Process Of Low Grade Iron Ore Using Bio-Char Derived From Empty Fruit Bunch And Palm Kernel Shell.
Master
Completed
2014
Main Supervisor
|
Synthesis And Characterization Of Au/Zn0/Cu Thin Film Memristor.
Master
Completed
2014
Co-supervisor
|
Development Of Aluminum Air Seawater Battery.
Master
Completed
2014
Co-supervisor
|
Studies Of Zinc Corrosion Inhibition Using Zr-Mcm-41 Inorganic Membrane.
Master
Completed
2014
Co-supervisor
|
Effect Of Water Vapour On The Oxidation Of Fe-Cr-Ni Alloy At 1073k.
Master
Completed
2013
Main Supervisor
|
Electrodeposition Of Zinc For Applications In Zinc-Air Cell.
Master
Completed
2012
Main Supervisor
|
Effect Of Induced Voltage On The Void Formation Of Sa-213 T91 Alloy Steel At 923k.
Master
In Progress
Main Supervisor
|
Inter-Diffusion Of Limestone-Blast Furnace Slag For Cement Clinker Production Using Waste Heat Recovery.
Master
In Progress
Main Supervisor
|
Development And Evaluation Of Sustainability Readiness Program For Petrochemical Project.
Master
In Progress
Co-supervisor
|
Research Projects
Completed
2021 - 2022 | Development of Fused Deposition Modeling (FDM) System Extruder for Printing Tin Material |
2019 - 2023 | Enhanced static and dynamic mechanical performance of Zirconia-Toughened Alumina infused with empty fruit bunch-derived solid carbon via chemical vapor infiltration technique for dual-use technologies |
2017 - 2017 | Metallurgical Study of Keris and It's Preservation Technique |
2017 - 2021 | Modelling of CVD reactor for pristine graphene synthesis |
2014 - 2018 | Fundamental Mechanism and Activation of Nanoadd Zirconia Toughened Alumina (ZTA) Cutting Insert via the Addition of Carbon Nanotube (CNT) for Machining Super Alloy Inconel 718 |
2014 - 2018 | Fundamental Study on Metal Dusting Prevention of AISI 316 Stainless Steels by Using Copper Coating |
2014 - 2020 | Fish Collagen Nanoparticles for the Encapsulation of Bioactive Peptides |
2013 - 2016 | Fabrication of High-Performance Carbon Nanotube Field-Effect Transistor by Alcohol Catalytic Chemical Vapor Deposition Method |
2013 - 2016 | Development of High Wear Resistent Nano Add ZTA Ceramic Cutting Insert for High Speed Machining Application |
2012 - 2016 | Micro - Drilling and Milling of Composite Materials For Application in Aerospace and Semiconductor Industries |
2012 - 2016 | Evaluation of the Effect of Water Vapor on the Adsoption of Oxygen in Ferritic Fe-Cr Alloy at 1073 K |
2012 - 2016 | Characterization of Tribo-Corrosion using Jatropha Curcas Linnaeas Biodiesel for Automotive Engine Compenent Materials |
2012 - 2016 | Development process and manufacturing of modern medical implants (Maxillofacial Surgery )using rapid prototyping technology |
2012 - 2015 | Development of Multi-Functional Inorganic Separator for Electrochemical Cells |
2012 - 2015 | Upscalling of Zero Emission Process for Hydrogen and Alumina Productions from Waste Management |
2011 - 2014 | Utilization of Biomass Waste as Energy Source in Iron Making |
2010 - 2013 | Characterization of Sputtered Al Doped ZnO and MgO Based Ceramic Thin Film as Transparent Conductive and Protective Layer in Plasma Display Panel |
2010 - 2013 | Fundamental study on the relationship between schottky barrier and dissolved hydrogen in metal surface and its' effect to accelerate the oxygen transport along metal-Cr2O3 heterojunction during high temperature oxidation of ferritic Fe-Cr alloy at 1073K |
2010 - 2012 | The Effects of Water Vapor on High Temperature Oxidation of Fe-Cr-Ni Alloy at 1073K. |
2010 - 2012 | Surface oxygen potential on growing oxide scale of Fe-Cr-Ni alloys at 1073 in dry and humid conditions |
2010 - 2012 | Effect of Inhibitors on the Corrosion of Automotive Materials under Palm Oil Biodiesel |
2009 - 2012 | Development of Inorganic Membrane for Microbattery Applications |
2009 - 2011 | Synthesis and Characterization of Photovoltic(PV) Cells |
2004 - 2005 | To Study on Language Planning in Malaysia |
On-Going
2020 - Present | Formulation Of Locally Available Materials Into Catalyst Support for Oil and Gas Industry |
2019 - Present | Critical Axial Distance and Angle of Inclination of Substrate for Graphene Synthesis using Tubular Chemical Vapour Deposition. |
2019 - Present | Development of high temperature corrosion protection of metallic alloys |
2017 - Present | Elucidating the Effects of Plasma Density on Graphene Growth from In-Situ Measurements by a Langmuir's Probe |
2016 - Present | Integrated Green Assessment of Poultry Waste Input-Output in Malaysia Farming Industry |
2015 - Present | Direct Synthesis of Large Area Graphene for NEMS Application |
2011 - Present | RU 2011: Investigation of Surface/Subsurface Damage During High-Speed Milling of SiC Using Diamond Coated End Mills |
2009 - Present | Advanced Materials and Surface Engineering (AMSERU) |
Award & Recognition
26 Jan, 2011 | Bronze IRIIE2010 - IIUM | University |
14 May, 2010 | Bronze medal ITEX2010 - Malaysian Invention and Design Society | International |
04 Feb, 2010 | Silver MTE2010 - Malaysian Association for Research Scientist | National |
26 Jan, 2010 | Silver IRIIE2010 - IIUM | University |
Publications
Article
Conference or Workshop Item
2023 | Blast furnace slag cement clinker production using limestone-hot blast furnace slag mixture. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), |
2023 | Effect of oxygen gas exposure on T91 alloy at high temperature oxidation of steam reformer. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), |
2023 | Maximum spreading diameter of a water droplet after impact on a hot surface beyond Leidenfrost temperature. In: 8th International Conference on Applications and Design in Mechanical Engineering (ICADME 2023), |
2023 | Metal dusting led failure in a high-temperature condenser. In: 7th International Corrosion Prevention Symposium for Research Scholars, CORSYM 2021, |
2023 | Review on fused deposition modelling extruder types with their specialities in filament extrusion process. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, |
2023 | Review on fused deposition modelling extruder types with their specialities in filament extrusion process. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), |
2022 | Assessment of corrosion on buried metallic pipeline induced by AC interference below high transmission line. In: 7th International Corrosion Prevention Symposium for Research Scholars, CORSYM 2021, |
2022 | Electrochemical monitoring of oxygen potential on Fe-Cr alloy surface during high temperature oxidation in dry and humid conditions. In: 7th International Corrosion Prevention Symposium for Research Scholars, CORSYM 2021, |
2022 | High temperature oxidation of T91 alloy of steam reformer. In: 7th International Corrosion Prevention Symposium for Research Scholars (CORSYM 2021), |
2022 | Producing blast furnace slag cement clinker by utilizing redox reaction approach. In: 7th International Corrosion Prevention Symposium for Research Scholars (CORSYM 2021), |
2020 | Accelerates high temperature oxidation due to the change of Schottky’s Barrier Height of Cr2O3 layer in humid condition. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, |
2020 | Electrochemical Impedance Spectroscopy (EIS) study of coconut water as natural inhibitor in Malay traditional preservation of iron artefact. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, |
2020 | High temperature cathodic protection of Fe-Cr alloy. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, |
2020 | Slagging of coal blends: comparison between pre-blended and in furnace blend. In: 2nd Joint Conference on Green Engineering Technology & Applied Computing 2020, |
2019 | Development of conductive polymer composites from PLA/TPU blends filled with graphene nanoplatelets. In: 6th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM), |
2019 | Development of inert ceramic for industrial application based on ternary phase diagram of potassiun oxide-aluminum oxide-silicon dioxide. In: 2019 Advances in Science and Engineering Technology International Conferences (ASET), |
2019 | Effects of hydrogen during annealing process of graphene synthesis via chemical vapor deposition. In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), |
2019 | Evaporation lifetime and boiling curve on hemispherical stainless steel (304) surface. In: , |
2019 | Improvement of gas barrier properties of Polyethylene Terephtalate (PET) by Graphene Nanoplatelets (GNP). In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), |
2019 | Influence of mixed convection in atmospheric pressure chemical vapor deposition of graphene growth. In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), |
2019 | Influence of surface energy and elastic strain energy on the graphene growth in chemical vapor deposition. In: Nanotech Malaysia 2018 in conjunction with 3rd International Conference on Enabling Science and Nanotechnology (ESciNano 2018), 5th Malaysia Workshop on 2D Materials and Carbon Nanotube (2DMC 2018), |
2019 | Receding height of water droplet in the film boiling regime. In: 6th International Conference on Applications and Design in Mechanical Engineering, |
2018 | A comparison between destructive and non- destructive techniques in determining coating thickness. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), |
2018 | A secondary, coplanar design Ni/MCM-41/Zn microbattery. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, |
2018 | Dilute electrodeposition of TiO2 and ZnO thin film memristors on Cu substrate. In: 6th International Conference on Electronic Devices, Systems and Applications 2017 (ICEDSA 2017), |
2018 | Effect of dissolved hydrogen on Schottky barrier height of Fe-Cr alloy heterojunction. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), |
2018 | Resistive switching of Cu/Cu2O junction fabricated using simple thermal oxidation at 423 K for memristor application. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017), |
2018 | Schottky's barrier height of T91/Cr2O3 heterojunction in dry and wet conditions: effects of watervapor onto accelerated high temperature oxidation. In: 2018 2nd International Conference on Engineering Innovation (ICEI), |
2018 | The viability of MCM-41 as separator in secondary alkaline cells. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, |
2017 | Effects of water vapor on protectiveness of Cr2O3 scale at 1073 k. In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17), |
2017 | High temperature oxidation in boiler environment of chromized steel. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017, |
2017 | The effect of temperature on the chromizing process for Ferritic-Martensitic steel. In: 1st International Conference on Materials Physics and Mechanics 2017, MPM 2017, |
2015 | Fabrication of flexible Au/ZnO/ITO/PET memristor using dilute electrodeposition method. In: 4th International Conference on Electronic Devices, Systems and Applications 2015 (ICEDSA), |
2015 | Influence of molecular weight average, degree of crystallinity, and viscosity of different polyamide PA12 powder grades on the microstructures of laser sintered part. In: 2015 3rd Asia Conference on Mechanical and Materials Engineering (ACMME 2015), |
2014 | Channel length effect on the saturation current and the threshold voltages of CNTFET. In: 11th IEEE International Conference on Semiconductor Electronics, ICSE 2014, |
2014 | Electronic state transition in cooperatively interacting point-defects in semiconductor crystals. In: 11th IEEE International Conference on Semiconductor Electronics, ICSE 2014, |
2012 | Evaluation of porous electrode properties using metal-air electrochemical system. In: 1st International Conference on Energy and Environmental Protection, ICEEP 2012, |
2011 | Observation on void formed in oxide scale of Fe-Cr-Ni alloy at 1073K in dry and humid environments. In: 2nd International Conference on Mechanical and Manufacturing Engineering 2011 (ICME 2011), |
2010 | Evaluation of oxygen surface potential at early stage of oxidation in dry and water vapor condition at 1073 K. In: International Symposium on High Temperature Oxidation and Corrosion (ISHOC) 2010, |
2010 | In-situ method to monitor surface reaction/oxidation at high temperature. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010), |
2010 | Increase of oxygen permeability on metal/oxide interface during high temperature oxidation of Fe-Cr alloys in water vapor at 1073 K. In: 3rd International Conference on Functional Materials and Devices 2010, |
2010 | Optimization of zinc electrodeposition from zinc-air cell discharge performance. In: 3rd International Conference on Functional Materials and Devices 2010, |
2010 | Preparation and characterization of inorganic MCM-41 membrane for zinc-air microbattery. In: 3rd International Conference on Functional Materials and Devices (ICFMD 2010), |
2010 | RF magnetron sputtered YSZ thin film: Fabrication and characterizations. In: 3rd International Conference on Functional Materials and Devices 2010, |