Staff Directory
Academic Qualification
- Ph.D in Material Sciences - Doctor of Philosophy, Universiti Kebangsaan Malaysia (UKM)
- M.Sc in Material Science - Masters Degree, Universiti Kebangsaan Malaysia (UKM)
- B.Sc (Hons) in Materials Science - Bachelor Degree, Universiti Kebangsaan Malaysia (UKM)
Noor Azlina Binti Hassan (Assoc. Prof. Ts. Dr.)
Associate Professor
IIUM Gombak Campus
KULLIYYAH OF ENGINEERING
noorazlina_hassan@iium.edu.my
5733
Expert Profile
Dr. Noor Azlina Hassan, a graduate of University Kebangsaan Malaysia, started her career as a researcher at the Faculty of Science and Technology, UKM, in 2003. She was appointed as an Assistant Professor in Manufacturing and Materials Engineering (IIUM) in 2011. She obtained the Bachelor of Science (Materials Science), Master of Science (Materials Science) and Degree of Doctor of Philosophy in Materials Science from UKM.
She was selected for a scholarship for sub-specialist/post-doctoral in 2013 and worked with IBM, Research Centre, USA under a special research programme with the Ministry of Education Malaysia (MOE), NanoMalaysia Berhad (NMB) and IBM Almaden Research Centre, San Jose, California for a special project of Nanogel Star Polymer Anti-Microbial Research before she returned to Malaysia in 2014.
She has been appointed as an Academic Advisor for Materials Engineering and serves as an Assistant Professor in the Department of Manufacturing and Materials Engineerig, Kulliyyah of Engineering.
She was selected for a scholarship for sub-specialist/post-doctoral in 2013 and worked with IBM, Research Centre, USA under a special research programme with the Ministry of Education Malaysia (MOE), NanoMalaysia Berhad (NMB) and IBM Almaden Research Centre, San Jose, California for a special project of Nanogel Star Polymer Anti-Microbial Research before she returned to Malaysia in 2014.
She has been appointed as an Academic Advisor for Materials Engineering and serves as an Assistant Professor in the Department of Manufacturing and Materials Engineerig, Kulliyyah of Engineering.
Teaching Responsibilities
ADVANCED MATERIALS CHARACTERIZATION | 2022/2023 2021/2022 2020/2021 2019/2020 |
Advanced Materials Characterizations | 2023/2024 |
CONTEMPORARY MATERIALS FOR ENGINEERING APPLICATIONS | 2022/2023 2021/2022 2018/2019 |
FINAL YEAR PROJECT 1 | 2023/2024 |
FINAL YEAR PROJECT I | 2023/2024 2022/2023 2021/2022 2019/2020 2018/2019 |
FINAL YEAR PROJECT II | 2023/2024 2022/2023 2019/2020 |
FUNDAMENTAL OF MATERIALS SCIENCE AND ENGINEERING | 2024/2025 2023/2024 2022/2023 2021/2022 |
FUNDAMENTALS OF MATERIALS ENGINEERING | 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 |
FUNDEMENTAL OF MATERIALS SCIENCE AND ENGINEERING | 2021/2022 |
INTRODUCTION TO ENGINEERING WORKSHOP | 2023/2024 |
MATERIALS CHARACTERIZATION | 2016/2017 2015/2016 2014/2015 |
MATERIALS CHARACTERIZATION AND NON- DESTRUCTIVE TESTING | 2024/2025 2023/2024 2022/2023 |
MATERIALS CHARACTERIZATION AND NON-DESTRUCTIVE TESTING | 2024/2025 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 |
MATERIALS ENGINEERING LAB II | 2018/2019 2017/2018 |
MATERIALS ENGINEERING LAB III | 2016/2017 2015/2016 2014/2015 2012/2013 2011/2012 |
MATERIALS ENGINEERING LAB IV | 2014/2015 2013/2014 |
NANOMATERIALS | 2024/2025 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2017/2018 |
NDT AND EVALUATIONS | 2012/2013 |
NONDESTUCTIVE TESTING AND EVALUATION | 2014/2015 2012/2013 2011/2012 |
POLYMER PHYSICS | 2020/2021 2017/2018 2015/2016 2012/2013 2011/2012 |
POLYMER PROCESSING | 2018/2019 |
SEMINAR | 2014/2015 2013/2014 |
SEMINAR II | 2011/2012 |
SPECIAL TOPICS IN MATERIALS ENGINEERING | 2012/2013 2011/2012 |
Supervision
Analysis Of Operational Factors Affecting Boiler Performance: Kuwait As A Case Study.
Ph.D
Completed
2022
Co-supervisor
|
Synthesization And Characterization Of Hybrid Zno-Sio2 Nanoparticles For Anti-Corrosion Nanocoating Of Medium Carbon Steel
.
Ph.D
Completed
2018
Main Supervisor
|
Characterization Of Graphene Oxide Pickering Emulsion And Silica Nanoparticles For Waterborne Epoxy Coating.
Master
Completed
2020
Main Supervisor
|
Development And Characterization Of Plasticized Polylactic Acid Biocomposite With Durian Skin Fibre For Food Packaging Application.
Master
Completed
2019
Co-supervisor
|
Polyhydroxyalakanoates (Pha) As Biodegradable Backbone Binder For Ss316l Metal Injection Moulding (Mim) Process.
Master
Completed
2019
Co-supervisor
|
Effects Of Electron Beam Irradiation On The Properties Of Recycled Polypropylene/ Microcrystalline Cellulose Composites.
Master
Completed
2017
Co-supervisor
|
Kenaf Core Sandwich Structure Composites Toughened With Modified Epoxy.
Master
Completed
2015
Main Supervisor
|
Polyhydroxyalkanoates/Zinc Oxide (Pha/Zno) Nanocomposites For Dielectric Applications.
Master
Completed
2015
Main Supervisor
|
Preparation And Characterization Of Polyhydroxybutyrate Filled Clamshells Biocomposite.
Master
Completed
2015
Co-supervisor
|
Research Projects
Completed
2019 - 2023 | Dyes Adsorption Using Hybrid Aerogel-Based Cellulose Nanocrystal Isolated From Palm Oil Biomass |
2017 - 2021 | Mechanism of the adhesion in between of polyelectrolyte layers and nanoreservoir for self-healing nanocoating. |
2016 - 2019 | Cradle-to-Cradle Food Packaging Prototype from Durian Skin Fibre Biocomposite |
2015 - 2018 | Study on the Novel Binder Based Biodegradable Polyhyroxyalkanoates (PHA) For Metal Injection Moulding Application |
2014 - 2017 | Effect of Irradiation Processing Route to the Improvement Properties of Green Recycled Polypropylene |
2013 - 2015 | Development of Environmental Friendly ZnO Nanocoating for Building Applications |
2013 - 2016 | Fundamental Studies on Hybrid ZnO-SiO2 Sol-gel Nanocoating for Anticorrosion Protection of Carbon Steel |
2012 - 2015 | Prototype Development of High Performance Lightweight Nanocomposite Sport Shoes |
2012 - 2016 | Development of pultruded green hybrid typha latifolia / recycled polyethyleneterepthalate composites |
2011 - 2014 | RU 2011: Mechanical and Thermal Properties of Bioplastic Nanocomposites |
On-Going
2020 - Present | Investigation on the process parameters and optimum performance of Al alloy-Graphene nanoplatelets self-lubricating nanocomposite via injection moulding technique for tribological application. |
2018 - Present | Development of self-healing nanocoating via polyelectrolyte assemblies for corrosion protection applications. |
2015 - Present | Investigation on a Novel Nondestructable Composite Materials for the Development of Disaster Rescue Box |
2009 - Present | Advanced Materials and Surface Engineering (AMSERU) |
Publications
Article
Conference or Workshop Item
2020 | Surface roughness of ZnO-SiO2 nanocoating. In: 7th AUN/SEED-Net Regional Conference On Natural Disaster 2019 (RCND 2019), |
2019 | Effects of plasticizer on mechanical properties of durian skin fiber reinforced polylactic acid biocomposite. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018 (ICXRI 2018), |
2018 | Fabrication of silica ceramic membrane via sol-gel dip-coating method at different nitric acid amount. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, |
2018 | Hardness and adhesion performances of nanocoating on carbon steel. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, |
2018 | Preparation of SS316L MIM feedstock with biopolymer as a binder. In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017, |
2017 | Mechanical properties of toughened polyester reinforced with untreated and treated kenaf hybird carbon composite. In: International Conference on Frontiers of Composite Materials (ICFCM 2016), |
2017 | Thermal, structural and mechanical properties of melt drawn cur-loaded poly(lactic acid) fibers. In: "Advances in Material and Processing Technologies Conference, AMPT 2017", |
2016 | Performance properties of irradiated recycled polypropylene as a compatibilizer in recycled polypropylene/microcrystalline cellulose composites. In: International Conference on Frontiers of Composite Materials 2016, |
2016 | Preparation of modified ceramic membranes with silica sol-dip coating for separation biogas application. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016), |
2016 | Synthesis of SiO2 nanostructures using sol-gel method. In: 5th International Advances in Applied Physics and Materials Science Congress & Exhibition (APMAS 2015), |
2016 | Synthesis of ZnO nanostructures using sol-gel method. In: 5th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM) & 2nd International Postgraduate Conference on Materials, Mineral and Polymer (MAMIP), |
2012 | The effect of coupling agent treatment on the mechanical and flame retardancy properties of rigid PVC-ATH nanocomposites. In: The International Conference on Composite Interfaces, |
Book
2012 | Advances in manufacturing and materials engineering. Trans Tech Publications Ltd., , ISBN: 978-3-03785-498-3 |