Staff Directory
Academic Qualification
- Ph.D in Materials - Doctor of Philosophy, Universiti Malaya (UM)
- Master of Science in Metallurgical Engineering - Masters Degree, Bangladesh University of Engineering & Technology, Dhaka
- Bachelor of Science in Metallurical Engineering - Bachelor Degree, Bangladesh University of Engineering & Technology, Dhaka
Md. Abdul Maleque (Prof. Dr.)
Professor
IIUM Gombak Campus
KULLIYYAH OF ENGINEERING
maleque@iium.edu.my
5785
Expert Profile
Professor Dr. Md Abdul Maleque serves as an Advisor at the Advanced Materials & Surface Engineering Research Unit (AMSERU), within the Department of Manufacturing & Materials Engineering at the International Islamic University Malaysia (IIUM). Additionally, he holds the esteemed position of Chairman of the Technical Committee on Standardization of Alloy Steel in Malaysia. Prof. Maleque is recognized as a Fellow and Chartered Mechanical Engineer of the Institution of Mechanical Engineers (IMechE), United Kingdom, and has been honored with the prestigious LIF Fellowship from the Royal Academy of Engineering, UK. Commencing his illustrious career as a lecturer in 1995 at the Faculty of Engineering, University of Malaya, Malaysia, Prof. Maleque has since served in various teaching and research capacities across leading academic institutions, including the University of Malaya and Multimedia University, until 2007. Subsequently, he joined IIUM in 2009, where he has been actively engaged in pioneering research, scholarly teaching, exemplary supervision, administrative leadership, securing coveted national and international research grants, and disseminating impactful research findings in reputable journals. Prof. Maleque is the life member of the Malaysian Tribology Society (MYTRIBOS) and has rendered valuable service on the executive committee of MYTRIBOS. Furthermore, he holds memberships in several esteemed professional bodies and organizations, including IMechE, International Association of Engineers (IAENG), and Malaysian Society for Engineering and Technology (MySET). His distinguished editorial contributions include serving as the Chief Editor of the 6th ICAMME2024 conference proceedings and the 5th ICAMME2022 conference proceedings (both Scopus indexed), in addition to his roles on the international advisory committees of various prestigious conferences and publications. Demonstrating a fervent commitment to cutting-edge research, Prof. Maleque has made significant contributions to numerous research areas, including Surface Engineering, Hybrid Composite Coating, Advanced Metallic & Composite Materials, Materials Selection, and Tribology. His scholarly endeavors have resulted in the publication of over 400 technical papers in leading Engineering Journals, International Conference Proceedings, Books, Book chapters, and patents. Prof. Maleque's outstanding research impact is reflected in his impressive citation metrics, with approximately 7200 citations to date, an h-index of 40, and an i10-index of 117. Additionally, he has demonstrated exceptional dedication to mentoring the next generation of researchers, having supervised 3 Postdoctoral fellows, 17 Ph.D. students, and currently guiding 4 Ph.D. projects. Prof. Maleque's scholarly eminence is further underscored by his extensive engagement as an invited speaker at numerous prestigious forums, both domestically and internationally, delivering over 20 invited lectures and several keynote addresses at conferences. His outstanding contributions have garnered widespread acclaim and recognition, evidenced by numerous awards, including being named among the 'Top 2% Scientists Worldwide' by Elsevier for two consecutive years (2023 and 2022), and receiving awards such as 'Top 22 Contributors to IIUM's Research Performance 2022,' 'Top 25 Contributors to IIUM's Research Performance 2021,' highest citation indexed award from IIUM, Quality Research award from IIUM, Vice Chancellor award from UM, Dean's award from UM, among others. Prof. Maleque's scholarly eminence extends to his role as an external examiner for both Ph.D. and MSc theses, as well as serving as an assessor for academic staff promotions at numerous esteemed universities, both domestically and abroad. Through his dedication to scholarly excellence and impactful research, Prof. Maleque continues to inspire and shape the future of engineering education and research, leaving an indelible mark on the academic landscape both locally and globally.
Area of Specialisation
- Natural Science ~ Material Sciences ~ Advanced Materials ~ Composite Materials - Advanced composite for automotive brake rotor
- Engineering Tech ~ Applied Sciences And Technologies ~ Engineering Materials ~ Other Engineering Materials n.e.c. - Materials characterization
- Natural Science ~ Material Sciences ~ Advanced Materials ~ Metals and Metal Alloy Materials - Surface modification of metallic material
- Engineering Tech ~ Applied Sciences And Technologies ~ Engineering Materials ~ Other Engineering Materials n.e.c. - Materials for automotive and energy;
- Engineering Tech ~ Engineering And Technology ~ Mechanical Engineering ~ Industrial Tribology - Sustainable composite materials
Professional Membership
- 2002 - 2006: Member of Profesional Body / Association: (Member), Asian Tribology Council (ATC)
- 2007 - 2027: Member of Profesional Body / Association: (Life Member), Malaysian Tribology Society (MyTRIBOS)
- 2010 - 2023: Member of Profesional Body / Association: (Member), Internation Association of Engineers
- 2012 - 2021: Member of Profesional Body / Association: (A. Member), Malaysian Society for Engineering & Technology (MySET)
- 2015 - 2022: Member of Profesional Body / Association: (CEng, Member), IMechE, UK
- 2019 - 2022: Member of Profesional Body / Association: (G. Member), Board of Engineers Malaysia
- 2020 - 2022: Member of Profesional Body / Association: (Associate Fellow), Academy of Sciences Malaysia
- 2021 - 2021: Member of Profesional Body / Association: (Member), Asian Council of Science Editors
- 2022 - 2024: Member of Profesional Body / Association: (Fellow), IMechE (UK)
Teaching Responsibilities
ADVANCED COMPOSITE MATERIALS | 2018/2019 2017/2018 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010 |
ADVANCED MATERIALS CHARACTERIZATION | 2017/2018 2016/2017 2015/2016 2014/2015 2010/2011 2009/2010 |
ADVANCED METALLIC MATERIALS | 2018/2019 2017/2018 2016/2017 |
COMPONENT DESIGN AND MATERIALS SELECTION | 2024/2025 2023/2024 2022/2023 |
FINAL YEAR PROJECT I | 2019/2020 2018/2019 |
FINAL YEAR PROJECT II | 2024/2025 2023/2024 2022/2023 2019/2020 |
FOUNDRY JOINING | 2013/2014 |
INTEGRATED DESIGN PROJECT | 2024/2025 2023/2024 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016 |
INTERGRATED DESIGN PROJECT | 2023/2024 2022/2023 |
MANUFACTURING ENGINEERING LAB I | 2010/2011 2009/2010 |
MATERIALS ENGINEERING LAB 4 | 2024/2025 2023/2024 2022/2023 |
MATERIALS ENGINEERING LAB IV | 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 |
MATERIALS LABORATORY I | 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012 |
MATERIALS PROCESS DESIGN | 2003/2004 |
MATERIALS SELECTION AND DESIGN | 2024/2025 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010 |
POWDER METALLURGY | 2024/2025 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010 |
PRODUCTION OF FERROUS AND NON-FERROUS | 2009/2010 |
PROJECT II | 2013/2014 2012/2013 |
RESEARCH METHODOLOGY & SEMINAR | 2023/2024 2022/2023 2021/2022 2020/2021 |
RESEARCH METHODOLOGY & SEMINAR IN MAT ENG (MIXED MODE) | 2022/2023 2021/2022 2020/2021 2019/2020 |
RESEARCH METHODOLOGY & SEMINAR IN MAT ENG (RESEARCH MODE) | 2020/2021 2019/2020 |
RESEARCH METHODOLOGY & SEMINAR IN MAT ENG (RESEARCH) | 2023/2024 2022/2023 2021/2022 |
RESEARCH METHODOLOGY & SEMINAR IN MFG ENG (MIXED MODE) | 2021/2022 2019/2020 |
RESEARCH METHODOLOGY & SEMINAR IN MFG ENG (RESEARCH) | 2023/2024 2022/2023 2021/2022 |
Research Methodology and Seminar | 2023/2024 2022/2023 2021/2022 2019/2020 |
RESEARCH METHODOLOGY AND SEMINAR IN MFG ENG (RESEARCH MODE) | 2019/2020 |
SEMINAR | 2012/2013 2003/2004 |
SEMINAR I | 2012/2013 2011/2012 2010/2011 |
SEMINAR II | 2012/2013 |
SMART MATERIALS | 2003/2004 |
SURFACE ENGINEERING AND TRIBOLOGY | 2015/2016 |
WASTE MATERIALAS PROCESSING | 2018/2019 2017/2018 |
WASTE MATERIALS PROCESSING | 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 |
Supervision
Improvement In The Effectiveness Of Diamond As Reinforcement In Strengthening The Porous Alumni Composite.
Ph.D
Completed
2024
Co-supervisor
|
Comparative Analysis Of Building Integrated Solar Water Heating Systems.
Ph.D
Completed
2023
Main Supervisor
|
Characterization Of Waste Marble And Graphene Oxide Reinforced Lm6 Aluminum Composites Fabricated By Stir Squeeze Casting Process.
Ph.D
Completed
2022
Main Supervisor
|
Characterization And Evaluation Of Heat Affected Zone For Tig Torch Welded High Strength Low Alloy Steel With Microalloying Elements Addition.
Ph.D
Completed
2021
Main Supervisor
|
Surface Modification Of Duplex Stainless Steel Using Tig Torch And Nitriding Processes For Tribological Applications.
Ph.D
Completed
2019
Main Supervisor
|
Characterization, Properties And Degradation Of Hot-Pressed Fabricated Rattan Waste Binderless Board.
Ph.D
Completed
2019
Co-supervisor
|
Development Of Tic / Nip Hbn Composite Coating For High-Temperature Tribological Applications.
Ph.D
Completed
2017
Main Supervisor
|
Influence Of Processing Parameters On The Properties Of Aisi 4340 Steel Coated With Tic Powder Fabricated By Tungsten Inert Gas Arc Melting.
Ph.D
Completed
2016
Main Supervisor
|
Optimization Of Stir Casting Process Parameters Of Aluminium Silicon Carbide Particulate Composites.
Ph.D
Completed
2016
Main Supervisor
|
Theoretical Modeling Of Process Performance In Micro Electro Discharge Machining For Nonconductive Ceramic Materials.
Ph.D
Completed
2015
Co-supervisor
|
Development Of Carbon Nanotube Aluminium Nano-Composite For Brake Disc Application.
Ph.D
Completed
2014
Main Supervisor
|
Development Of Cement/Rha-Derived Nano-Silica For Co2 Regeneration Capture.
Ph.D
In Progress
Co-supervisor
|
Modified And New Iterative Method In Solving Linear And Nonlinear Differential Equations
.
Master
Completed
2022
Co-supervisor
|
Corrosion-Wear Simulation Of Automotive Engine Component Materials Under Biodiesel.
Master
Completed
2022
Co-supervisor
|
Knowledge Based System For Structural Bridge Truss Material Selection.
Master
Completed
2020
Main Supervisor
|
The Development Of Polypropylene Composites Reinforced Micro And Nanoalumina Filler From Industrial Waste.
Master
Completed
2016
Co-supervisor
|
Development And Characterization Of Hard Coating Layer On Cp-Ti Using Fe-C-Si Powder Mixture.
Master
Completed
2015
Main Supervisor
|
The Development Of Sago Starch/Kenaf Fiber Biocomposite Films.
Master
Completed
2015
Co-supervisor
|
Development Of Hybrid Kenaf-Glass Reinforced Upe Composite For Structural Application.
Master
Completed
2014
Main Supervisor
|
Tribo-Corrosion Behavior Of Tic Coated Aisi 4340 Steel In Jatropha Curcas Biodiesel.
Master
Completed
2014
Main Supervisor
|
Mechanical And Thermal Properties Of Sic Reinforced Aluminium Copper Matrix Composite Materials For Automotive Piston Application.
Master
Completed
2013
Main Supervisor
|
Thermo-Mechanical Analysis Of Multiple-Particle Size (Mps) Sic Reinforced Aluminium Matrix Composite (Amc) Brake Rotor.
Master
Completed
2012
Main Supervisor
|
Effect Of Nanoclay On The Mechanical And Thermal Properties Of Kenaf Fibre Reinforced Polylactiacid Acid(Pla) Hybrid Biocomposite.
Master
Completed
2012
Co-supervisor
|
Wear Of Dlc-Coated Injector Nozzle Materials In Presence Of Biodiesel.
Master
In Progress
Main Supervisor
|
Hybrid Esic-Graphane Oxide Coating On Ti-Alloy Using An Addictive Manufacturing Method.
Master
In Progress
Main Supervisor
|
Surface Passivation Of Porous Niti Shape Memory Alloy Via Thermal Oxidation.
Master
In Progress
Co-supervisor
|
Research Projects
Completed
2021 - 2024 | Hybrid eSiC-graphene oxide coating mechanism on Ti-alloy to enhance properties using an additive manufacturing method |
2021 - 2023 | Corrosive-wear Performance Evaluation of Automotive Component Materials Under Palm Oil Biodiesel Condition |
2019 - 2023 | UNRAVELLING CATALYTIC MECHANISM OF HIGH ENTROPY ALLOYS (HEAs) FOR ENERGY-EFFICIENT AZO DYE REMOVAL IN FENTON REACTION |
2019 - 2024 | Regeneration behaviour of nanosilica with concrete waste via natural self-healing route for capturing CO2 |
2017 - 2019 | Eco-silicon Carbide Reinforced Aluminium Matrix Composite for Automotive Brake Disc Application |
2015 - 2018 | Surface Coating of Duplex Stainless Steel Using Nitriding and TIG Torch Melting Techniques - A Comparative Study |
2015 - 2018 | Precision Control of KERF in Micro Wire Electro Discharge Machining with Dry Dielectric Fluid |
2015 - 2018 | Fundamental Study of Mechanical Behavior of Aluminum Foam Sandwich in Structural Parts for Automotive |
2014 - 2017 | Effect of Irradiation Processing Route to the Improvement Properties of Green Recycled Polypropylene |
2014 - 2018 | Wear Resistance Enhancement of Wind Turbine Blade Materials under Sand Impact |
2012 - 2016 | Characterization of Tribo-Corrosion using Jatropha Curcas Linnaeas Biodiesel for Automotive Engine Compenent Materials |
2012 - 2015 | Prototype Development of Light Weight Aluminium Matrix Composite Automotive Brake Rotor |
2012 - 2014 | Micro-Structuring of Nonconductive Ceramic Materials using Micro-EDM with Pyrolytic Carbon in Dielectric Fluid |
2011 - 2012 | Thermo-Mechanical Properties of Al-Cu Matrix Composite with Varying Particle Size SiC Reinforcement for The Application of Automotive Piston |
2011 - 2013 | Electro-Discharge Machining of Nonconductive Ceramic Materials |
2011 - 2014 | RU 2011: Characterization of Recast Layer Formed on Ceramic Materials Due to Electro Discharge Machining |
2011 - 2017 | Erosion Corrosion and Tribological Behaviour of TIG Torch Processed Composite Layers |
2011 - 2012 | Characterization Of Ceramic Materials After Machining By EDM |
2010 - 2016 | Cladding of Low Alloy Steel Surfaces with Superalloy via TIG Torch Melting Technique |
2010 - 2011 | The development of an optimum material selection and conceptual design process for automotive piston-cylinder liner |
2010 - 2013 | Fundamental Study of New Eco-core Metal Matrix Composite Sandwich Structure |
2010 - 2012 | Effect of Inhibitors on the Corrosion of Automotive Materials under Palm Oil Biodiesel |
2009 - 2011 | Simulation and Fabrication of SiC Reinforced Aluminium Metal Matrix Composite (SiC-AMC)Automotive Brake rotor |
2009 - 2010 | Reverse Engineering of Child Bicycle |
On-Going
2024 - Present | Enhancing Energy Efficiency and Reducing Lighting Costs Through Electrodeless Sulfur Lamps with Microwave Excitation |
2023 - Present | Investigating the wear mechanism of the duplex stainless steel coated with TiC nanoparticles through TIG torch melting method |
2023 - Present | Formulation of Ternary rGO/Mixed Transition Metal Oxide (NiCo2O4/MnCo2O4)-based Carbon Fabric for High-Performance All-Solid-State Supercapacitors in Electric Vehicles |
2022 - Present | Increasing the Performance and Service Life of a Diesel Engine Fuel Injector by Surface Modification |
2009 - Present | Advanced Materials and Surface Engineering (AMSERU) |
Award & Recognition
07 Jul, 2024 | VVIP Speech Writing Committee of IEC 2024 - KOE, IIUM | KCDIO |
11 Jun, 2024 | Top 10 Contributor's to IIUM Research Performance - KOE, IIUM | KCDIO |
28 Apr, 2024 | Excellence Bangladeshi Academician Award - Others | National |
17 Apr, 2024 | nternational Technical Committee Member - Organizer of ICNNN2024 | International |
29 Mar, 2024 | Chair for `3rd Edition of Mechanical and Aerospace Engineering Virtual? - SCIWIDE | International |
28 Mar, 2024 | International Technical Committee - International Conference on Materials Technology and Applications | International |
27 Mar, 2024 | International Scientific Committee - International Conference on Advanced Materials Sciences and Engineering | International |
23 Jan, 2024 | Best Paper Award - Semarak Ilmu Publishing | International |
20 Jan, 2024 | Section Editor - Deer Hill Publications | International |
10 Jan, 2024 | Reviewer Board Member of paperASIA (SCOPUS) - Others | National |
23 Oct, 2023 | World's Top 2% Scientists - Elsevier Publisher | International |
01 Jul, 2023 | International Scientific Committee - Organizer of ICASET 2023 Oman | International |
11 Apr, 2023 | International Technical Committee - Organizer of ICNNN 2023 | International |
01 Apr, 2023 | SCIENTIFIC AND TECHNICAL COMMITEE_TWF - TWA Africa (Welding Federation) | International |
30 Mar, 2023 | Panel Evaluator - International Islamic University Malaysia | University |
20 Mar, 2023 | Section Editor - Deer Hill Pubr | International |
02 Mar, 2023 | PANEL JURI CITReX 2023 - University Malaysia Pahang | National |
01 Mar, 2023 | Guest Editor of Nanomaterials - Multidisciplinary Digital Publishing Institute (MDPI) | International |
20 Feb, 2023 | IIUM Panel Evaluator - International Islamic University Malaysia | University |
22 Dec, 2022 | JUDGE for KERICE2022 - KOE, IIUM | KCDIO |
28 Oct, 2022 | World's Top 2% Scientists - Elsevier Publisher | International |
25 Jul, 2022 | Top 10 Contributor's to IIUM Research - KOE | KCDIO |
01 Jun, 2022 | International Scientific Committee - Organizer of ICASET 2022 Oman | International |
30 May, 2022 | - International Islamic University Malaysia | University |
26 May, 2022 | International Technical Committee Member - Organizer of ICNNN, Japan | International |
09 Apr, 2022 | Judge for 3MT - KOE, IIUM | KCDIO |
31 Mar, 2022 | Panel Evaluator - International Islamic University Malaysia | University |
31 Mar, 2022 | IIUM Panel Evaluator - International Islamic University Malaysia | University |
11 Mar, 2022 | Juri Hakim (Judge Panel) - University Malaysia Pahang | National |
01 Mar, 2022 | Guest Editor - MDPI, Basel, Switzerland | International |
19 Jan, 2022 | IIUM Panel Evaluator - Others | University |
26 Nov, 2021 | Fellow - Institution of Mechanical Engineers, UK | International |
09 Oct, 2021 | Editorial Board Member - Universiti Malaysia Pahang | International |
13 Sep, 2021 | Chairman of Technical Committee on Alloy Steel - Others | National |
01 Sep, 2021 | Fellow - Royal Academy of Engineering, UK | International |
30 Apr, 2021 | Judge 3MT - KOE, IIUM | KCDIO |
13 Apr, 2021 | International Technical Committee - Organizer of ICNNN, Japan | International |
30 Mar, 2021 | Industrial Award 2021 - Malaysian Tribology Society (MYTRIBOS) | National |
16 Mar, 2021 | Internal Assessor - KOE, IIUM | KCDIO |
15 Mar, 2021 | Judge Hakim (Judge Panel) - Universiti Malaysia Pahang | National |
27 Feb, 2021 | FRGS Review Panel (University Level) - International Islamic University Malaysia | University |
23 Dec, 2020 | Board of Examiner - SRI SIDDHARTHA ACADEMY OF HIGHER EDUCATION INDIA | International |
20 Nov, 2020 | Leader Curriculum Review Committee of PG - Kulliyyah of Engineering | KCDIO |
09 Nov, 2020 | Associate Fellow - Academy of Sciences Malaysia | National |
28 Oct, 2020 | Chairman of TC on Alloy Steels - Department of Standard Malaysia | National |
21 Jul, 2020 | Examiner for IDP, KOE - KOE | KCDIO |
30 Jun, 2020 | Assessor for Master of Science in BioTech Engg - Others | University |
04 Mar, 2020 | Judge for MLC - Kulliyyah of Engineering, IIUM | KCDIO |
23 Jan, 2020 | Juri Hakim (Judge Panel) - University Malaysia Pahang | National |
08 Jan, 2020 | Panel for FRGS/PRGS grants applications - University Malaysia Pahang | National |
06 Jan, 2020 | Editorial Board Member - University Malaysia Pahang | National |
24 Dec, 2019 | Leaders-in-innovative fellowship Award 2020 - Royal Academy of Engineering, UK | International |
18 Sep, 2019 | Gold Award from KERICE - KOE, IIUM | KCDIO |
12 Feb, 2019 | Juri Hakim (Judge Panel) - University Malaysia Pahang | National |
14 Dec, 2018 | Judge for IDP, KOE - KOE, IIUM | KCDIO |
08 Dec, 2017 | Sijil Penghargaan - SITIM STS | National |
09 Aug, 2017 | Pitch Your Product 2017 - IIUM | University |
10 Apr, 2017 | Sijil Penghargaan - SIRIM | National |
15 Mar, 2017 | Juri Hakim (Judge Panel) - University Malaysia Pahang | National |
18 Feb, 2017 | The Invention and Innovation Award (Gold) - Private | National |
16 Feb, 2017 | Bronze Award for innovation/invention - Malaysian Associations of Research Scientist | National |
16 Feb, 2017 | Gold Medal Award for innovation/invetion - Private | National |
10 Feb, 2017 | Assessor Research Grant - Kulliyyah of Engineering | KCDIO |
06 Feb, 2017 | Sijil Penghargaan - SIRIM STS Sdn Bhd | National |
01 Feb, 2017 | Evaluation Panel member for FRGS Application - UMP | National |
30 Jan, 2017 | Evaluator of FRGS Project Proposal - Universiti Malaysia Pahang(UMP) | National |
18 Dec, 2016 | Section Editor of Encyclopedia on Renewable and Sustainable Materials - Elsevier Ltd | International |
13 Dec, 2016 | Section Editor - Elsevier Int. | International |
21 Nov, 2016 | Examiner for Peperiksaan Lisan - University Malaysia Pahang | National |
08 Nov, 2016 | Session Chair for AMPT 2016 - University Malaya | International |
01 Sep, 2016 | Panelist for foroum on 'Islamization of Engineering Education - Kulliyyah of Engineering | KCDIO |
29 Aug, 2016 | Chief Editor of Engineering Research with Ethics and Values - International Islamic University Malaysia | University |
01 Jul, 2016 | Editorial Board Member - J of Materials & Manufacture, Deer Hill Pubr | International |
01 Jun, 2016 | Associate editor International Journal of Multidisciplinary Design, Analysis and Optimization, - A D Publication | International |
01 Jun, 2016 | Judge for Tribology Poster Competition - University of Malaya | International |
29 Mar, 2016 | MOHE Panel for Research Grant Evaluation - Ministry of Education | National |
28 Mar, 2016 | IIUM Panel Evaluator - International Islamic University Malaysia | University |
06 Dec, 2015 | Silver Award - Ministry of Higher Education | National |
22 Oct, 2015 | Session Chair for ICBTS 2015 at Berlin Germany - ICBTS | International |
21 Oct, 2015 | Judge for KERIE - KOE | KCDIO |
05 Oct, 2015 | Speaker at MTDC-SYMBIOSIS Program - Malaysian Technology Development Corporation (MTDC) | National |
02 Oct, 2015 | University Innovation Award - International Islamic University Malaysia | University |
02 Oct, 2015 | IRIIE 2015 Gold Medal Award - IIUM | University |
07 Sep, 2015 | Advisory Member of ICoFM - Universiti Malaysia Perlis | National |
18 Aug, 2015 | Session Chair - UMP | International |
15 Aug, 2015 | Session Chair of ICMER15 - University Malaysia Pahang | National |
27 Oct, 2014 | Panelist - KOE | KCDIO |
23 Sep, 2014 | Keynote Speaker - KOE, IIUM | KCDIO |
18 Jul, 2014 | Quality Award - IIUM | University |
13 Jun, 2014 | Judge for KERIE13 - KOE, IIUM | KCDIO |
11 Jun, 2014 | Bronze - IIUM | International |
29 Apr, 2014 | Highest Citation in Citation Index Journal Award - IIUM | University |
15 Feb, 2014 | Internationalisation Bureau - MYTRIBOS | International |
02 Dec, 2013 | Guest editor, Special issue of Procedia Engineering - Elsevier Ltd, UK | International |
09 May, 2013 | Silver Award from 24thInternational Invention & Innovation Technology Exhibition (ITEX) - Malaysian Invention & Design Society (MINDS) | International |
14 Mar, 2013 | Quality Award - IIUM | University |
19 Feb, 2013 | Two (2) Gold medal for exhibiting outstanding research finding to the IRIIE2013, IIUM - IIUM | University |
13 Feb, 2013 | Reviewer for ERGS grant - KOE, IIUM | KCDIO |
27 Feb, 2012 | Silver Award - IIUM | University |
27 Feb, 2012 | Bronze Award - IIUM | University |
15 Jul, 2011 | Sijil Penghargaan - SIRIM Berhad | National |
15 Jul, 2011 | Sijil Penghargaan - SIRIM Berhad | National |
01 Jul, 2011 | Sijil Penghargaan - SIRIM Berhad | National |
01 Mar, 2011 | Bronze Medal - IIUM | University |
01 Mar, 2011 | Bronze Medal - IIUM | University |
26 Jan, 2010 | Bronze Award in IRIIE2010 Exhibition - RMC, IIUM | University |
30 May, 2005 | Editorial Board Member of Int J. of Indust Lubr & Trib., - Emerald Pubr., UK | International |
18 Jun, 2003 | Anugerah Khidmat Cemerlang - Universiti Malaya | University |
12 Mar, 1999 | Sijil Dekan - Faculty of Engineering, UM | University |
Publications
Article
Conference or Workshop Item
Book
Book Section
Monograph
2023 | Stainless steels for general purposes – Part 2: Corrosion-resistant semi-finished products, bars, rods and sections (First revision) (ISO 16143-2:2004, MOD). In: Department of Standard Malaysia (DSM), |
2020 | Stainless steels for general purposes - Part 1: Corrosion-resistant flat products (ISO 16143-1:2014, MOD) (First revision). In: Department of Standards Malaysia, |
2017 | Hot rolled alloy steel wire rod for pre-stressed steel - Specification. In: DSM, |
2017 | Prototype development of light weight aluminium matrix composite automotive brake rotor. In: , |
2016 | Alloy steel bars for special application bolting materials. In: , |
2016 | Characterization of Tribo-corrosion using jatropha curcas linnaeas biodiesel for automotive engine component materials. In: , |
2016 | Erosion corrosion and tribological behavior of TIG torch composite layers. In: Research Management Centre, International Islamic University Malaysia, |
2012 | Characterization of ceramic materials after machining by EDM. In: s.n, |