Article |
2021 |
Stress analysis of composite aircraft wing using coupled fluid-structural analysis. CFD Letters
, 13
(11)
pp.78-86
|
2021 |
Effect of cut-out shape on the stresses in aircraft wing ribs under aerodynamic load. CFD Letters
, 13
(11)
pp.87-94
|
2021 |
Experimental study on the effect of boundary layer control on the aerodynamics characteristics of NACA 0021 Aerofoil. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
|
2021 |
A review of HVAC system optimization and its effects on saving total energy utilization of a building. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
|
2021 |
Energy efficiency and optimization of buildings for sustainable development in Malaysia. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
|
2021 |
Estimation of stress intensity factor reduction for a center-cracked plate integrated with piezoelectric actuator and composite patch. Thin Walled Structures
, 158
pp.1-15
|
2020 |
Optimization of composite patch repair for center-cracked rectangular plate using design of experiments method. Materials Today: Proceedings
, 27
(2)
pp.1713-1719
|
2020 |
The effect of fuel weight distribution on the aeroelastic instability of swept wings. International Journal of Vehicle Structures & Systems
, xx
(xx)
pp.1
|
2020 |
Statistical Analysis of Adhesive Bond Parameters in a Single Lap
Joint System. Journal of Modern Mechanical Engineering and Technology
, 7
pp.53-58
|
2019 |
Experimental and numerical study on the aerodynamics and stability characteristics of a canard aircraft. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
, 53
(2)
pp.165-174
|
2019 |
A new higher order theory for analysis of orthotropic cylindrical shell under electromechanical load. International Journal of Engineering and Advanced Technology (IJEAT)
, 8
(3S)
pp.749-753
|
2019 |
Application of machine learning with impedance based techniques for structural health monitoring of civil infrastructure. International Journal of Innovative Technology and Exploring Engineering (IJITEE)
, 8
(6S4)
pp.1139-1148
|
2019 |
Educational software for stress analysis of non-idealized closed thin-walled sections. International Journal of Engineering & Technology
, 7
(6S)
pp.196-202
|
2019 |
Numerical and experimental study on the effect of cab- extender on the flow characteristics of a tractor-trailer. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
, 53
(1)
pp.61-68
|
2019 |
The impact behaviour of carbon fiber-epoxy composite leading edge using finite element method. International Journal of Recent Technology and Engineering
, 8
(2)
pp.2617-2622
|
2019 |
Shape control of composite plates with piezoelectric actuators. International Journal of Recent Technology and Engineering (IJRTE)
, 7
(6S)
pp.219-223
|
2019 |
Effect of bonded composite patch on the stress intensity factor for a center cracked plate. IIUM Engineering Journal
, 20
(2)
pp.211-221
|
2018 |
Finite element analysis of thermal stress intensity factors for cracked bimaterial system under convective cooling. CFD Letters
, 10
(2)
pp.18-27
|
2018 |
Numerical and experimental study on the effect of cab-extender on the flow characteristics of a tractor-trailer. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
, xx
(xx)
pp.1-8
|
2018 |
Medical genetics in developing countries in the Asia-Pacific region: challenges and opportunities. Genetics in Medicine
, 20
(10)
pp.1114-1121
|
2018 |
Stress analysis of thin-walled laminated composite beams under shear and torsion. International Journal of Engineering Materials and Manufacture
, 3
(1)
pp.9-17
|
2018 |
Numerical analysis of cracks emanating from hole in plate repaired by composite patch. International Journal of Mechanical and Production Engineering Research and Development
, Special issue
pp.238-243
|
2018 |
Stress concentration analysis of a composite patch on a hole in an isotropic plate. International Journal of Mechanical and Production Engineering Research and Development
, 2018
(Special Issue)
pp.249-255
|
2018 |
A matlab based educational software for the study on the effect of cut-out in aircraft wings. International Journal of Engineering & Technology
, 7
(4.25)
pp.114-118
|
2017 |
Yawing force of electric trimmers of a hybrid buoyant aerial vehicle. Pertanika J Sci and tech
, 25
(1)
pp.293-302
|
2017 |
Wind tunnel testing of hybrid buoyant aerial vehicle. Aircraft Engineering and Aerospace Technology
, 89
(1)
pp.99-105
|
2017 |
Crash analysis of an aircraft fuselage under belly landing. International Journal of Recent Research Aspects
, 4
(4)
pp.73-76
|
2017 |
Hybrid buoyant aircraft: future STOL aircraft for interconnectivity of the Malaysian islands. Journal of Aviation Technology and Engineering
, 6
(2)
pp.80-88
|
2016 |
Hygrothermoelastic analysis of orthotropic cylindrical shells. Latin American Journal of Solids and Structures
, 13
(3)
pp.573-589
|
2016 |
Estimation of pitching moment of a hybrid lifting fuselage - Disguised as hull of an airship. ARPN Journal of Engineering and Applied Sciences
, 11
(4)
pp.2217-2221
|
2016 |
Framework of conceptual design methodology for hybrid buoyant
aircraft. Aerotecnica Missili & Spazio = The Journal of Aerospace Science, Technology and Systems
, 95
(2 (April-June))
pp.99-110
|
2016 |
Effect of wing loading on gross takeoff mass of a hybrid buoyant aircraft. International Journal of Unmanned Systems Engineering
, 4
(1)
pp.11-22
|
2016 |
Assessment of engine's power budget for hydrogen
powered hybrid buoyant aircraft. Propulsion and Power Research
, 5
(1)
pp.34-44
|
2016 |
Establishing the analytical relationships for mass and volumetric mass fractions for hybrid buoyant aircraft. ARPN Journal of Engineering and Applied Sciences
, 11
(1)
pp.286-291
|
2015 |
Design and fabrication of a winged hybrid airship model for IIUM-LSWT. Advanced Materials Research
, 1115
pp.513-516
|
2015 |
Stress analysis of thin-walled laminated composite beams. ARPN Journal of Engineering and Applied Sciences
, 10
(21)
pp.10088-10095
|
2015 |
Cambered profile of a California sea lion's body. The Journal of Experimental Biology
, 218
pp.1270-1271
|
2015 |
Aerostatic and aerodynamic modules of a hybrid buoyant aircraft: an analytical approach. IIUM Engineering Journal
, 16
(1)
pp.9-17
|
2015 |
Hygrothermoelastic analysis of anisotropic cylindrical shells. Composite Structures
, 131
pp.151-159
|
2015 |
A higher order theory for bending of cross ply laminated cylindrical
shell under hygrothermal loads. Advanced Materials Research
, 1115
pp.509-512
|
2015 |
Thermoelastic slutions for flexure of anisotropic cylindrical shells. Advanced Materials Research
, 1115
pp.564-567
|
2015 |
LEADME : an educational software for composite laminate analysis
and design
. Advanced Materials Research
, 1115
pp.578-581
|
2015 |
Half model testing for canard of a hybrid buoyant aircraft. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering
, 9
(10)
pp.1544-1547
|
2014 |
Experimental study of impact on carbon-fiber-epoxy composite wing leading edge structure. Applied Mechanics and Materials
, 493
pp.672-677
|
2014 |
Study on the effect of window opening on the drag characteristics of a car. International Journal of Vehicle Systems Modelling and Testing
, 9
(3-4)
pp.311-320
|
2013 |
Educational software for stress analysis of idealized thin walled open sections. Applied Mechanics and Materials
, 315
pp.339-343
|
2013 |
Effect of cross sectional shape on the energy absorbing
characteristics of a tube under quasi-static loading. Applied Mechanics and Materials
, 315
pp.334-338
|
2012 |
Experimental and numerical simulation of hollow structure under compression loading. Advanced Materials Research
, 576
pp.651-654
|
2012 |
Experimental study on jute-fiber-epoxy composite plate subjected to impact loading. Advanced Materials Research
, 576
pp.232-235
|
2012 |
Development of educational software for stress analysis of an aircraft wing. Journal of Engineering Science and Technology
, 7
(3)
pp.322-338
|
2011 |
Effects of fiber orientation of adjacent plies on the mode I
crack propagation in a carbon-epoxy laminates. Procedia Social and Behavioral Sciences
, 10
pp.3179-3184
|
Conference or Workshop Item |
2021 |
Study on the lateral torsional buckling of composite thin-walled beam.
In: BICET, 8th Brunei International Conference Engineering and Technology
|
2021 |
Assessment of shell theories for cross-ply and angle-ply laminated cylindrical shells under thermo-mechanical loads.
In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021)
|
2021 |
Educational software for stress analysis of idealized multi-spar aircraft wing.
In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021)
|
2021 |
Crash analysis of aircraft composite fuselage under belly landing.
In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021)
|
2021 |
A review of effect of higher order nonlinear theories on analysis of Piezoelectric laminates.
In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021)
|
2020 |
Role of educational software in remote teaching and learning.
In: International E-conference on New Normal in Education 2020 (IENNE 2020)
|
2020 |
MATLAB-Based educational tool for failure analysis of composite laminates.
|
2020 |
Optimization of composite patch repair for center-cracked rectangular plate using design of experiments method.
In: 1st International Conference on Advanced Light-Weight Materials and Structures, ICALMS 2020
|
2019 |
Prediction of buckling mode for simply supported stiffened thin plates subject to inplane loading.
In: 11th International Conference On Numerical Analysis In Engineering Conference In Numerical Analysis In Engineering (NAE) 2019
|
2019 |
Aerodynamics of a circular planform wing.
In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018)
|
2018 |
Educational software for stress analysis of non-idealized closed thin-walled sections.
In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18)
|
2018 |
Finite element analysis of thermal stress intensity factors for cracked bimaterial system under convective cooling.
In: 4th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2018)
|
2018 |
Educational software for stress analysis of idealized closed thin walled sections.
In: International Conference on Aviation Technology and Management (ICATEM2018)
|
2017 |
Effect of temperature and moisture dependent material properties on the bending behavior of laminated cylindrical shell under hygrothermal loads.
In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16)
|
2017 |
Optimal location of piezoelectric patches for active vibration control.
In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE '16)
|
2017 |
Effect of stitching on the tensile mechanical property of empty fruit bunch oil palm fiber reinforced epoxy composites.
In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016
|
2017 |
Tensile mechanical property of oil palm empty fruit bunch fiber reinforced epoxy composites.
In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016
|
2017 |
Numerical investigation of aerodynamic characteristics of high speed train.
In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016
|
2016 |
A novel technique to neutralize the Yawing moment due to asymmetric thrust in a hybrid buoyant aircraft.
In: 10th International Conference on Experimental Fluid Mechanics, EFM 2015
|
2016 |
A prospective solution For consistent aerostatic lift for a hybrid buoyant aircraft.
In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016
|
2016 |
Effect of side wind on the directional stability and aerodynamics of a hybrid buoyant aircraft.
In: 2015 International Conference on Mechanical Engineering and Electrical Systems (ICMES 2015)
|
2015 |
Hydrostatic and hydrodynamic characteristics of swimming animals: an inspiration for hybrid buoyant aircraft.
In: 4th International Scientific Conference on Applied Sciences and Engineering (4 thISCASE-2015)
|
2015 |
Power-off static stability analysis of a clean configuration of a hybrid buoyant aircraft.
In: 8th Ankara International Aerospace Conference 2015
|
2015 |
Aerodynamics and Static Stability Characteristics of a Hybrid Buoyant Aerial Vehicle at Low Speed.
In: 62nd Canadian Aerospace Institute Conference (Aero 2015)
|
2015 |
Establishing the analytical relationships for mass and volumetric mass fractions for hybrid boyant aircraft.
In: International Postgraduate Conference on Engineering Research (IPCER) 2015
|
2014 |
LEADME : an educational software for composite laminate analysis and design.
In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014)
|
2014 |
Conceptual design of a winged hybrid airship.
In: 21st Lighter than Air Technology Conference, Aviation 2014
|
2014 |
Stability and takeoff ground roll issues of hybrid buoyant aircraft.
In: 5TH INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING 2014 (ICME2014)
|
2014 |
Comparison of digital DATCOM and wind tunnel data of a winged hybrid airship’s generic model.
In: AEROTECH V
|
2014 |
Mirrorless car: a feasibility study.
In: 2nd International Conference on Recent Advances in Automotive Engineering and Mobility Research, ReCAR 2013
|
2014 |
Static longitudinal stability of a hybrid airship.
In: 11th International Bhurban Conference on Applied Sciences & Technology (IBCAST)
|
2014 |
Thermoelastic solutions for flexure of anisotropic cylindrical shells.
In: 2nd International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014)
|
2013 |
Flow visualization over a circular planform wing.
In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 13)
|
2013 |
Numerical simulation of a low aspect ratio wing at low Reynolds number.
In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 13)
|
2013 |
Design and development of IIUM hovercraft.
In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 13)
|
2013 |
Analysis of composite box beam with piezoelectric actuators using ANSYS.
In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 13)
|
2011 |
Experimental observation of Jute/Epoxy composite plate subjected to impact loading.
In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11)
|
2011 |
Educational software for stress analysis of thin-walled sections 1 : Isotropic material.
In: The International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2011)
|
2011 |
Educational software for stress analysis of thin-walled sections 2: Composite material.
In: The International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2011)
|
2010 |
Design and development of driving system for disabled driver.
In: World Engineering Congress 2010
|
2010 |
Educational software for stress analysis of an aircraft fuselage.
In: International Conference on Mechanical and Aerospace Engineering (ICMAE 2010)
|
2008 |
The IIUM low speed wind tunnel.
In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management
|
2008 |
Flow field characteristics of the IIUM low speed wind tunnel.
In: 3rd International Symposium on Advanced Fluid/Solid Science and Technology in Experimental Mechanics
|
Book Section |
2011 |
Design and development of driving system for disabled driver .
In: Advanced Topics in Mechanical Behavior of Materials
IIUM Press
. ISBN 9789674181741
, pp.208-213
|
2011 |
Structural analysis of an active beam.
In: Advances in aircraft structure
IIUM Press
. ISBN 978-967-418-148-2
, pp.125-130
|
2011 |
Application of Virtual Fields Method to Composite Plate Bending Problem.
In: Advances in aircraft structure
IIUM Press
. ISBN 978-967-418-148-2
, pp.137-142
|
2011 |
Application of Virtual Fields Method to Composite Plate Bending Problem.
In: Advances in aircraft structure
IIUM Press
. ISBN 978-967-418-148-2
, pp.137-142
|
2011 |
Buckling of composite columns.
In: Advances in Aircraft Structures
IIUM Press
. ISBN 978-967-418-148-2
, pp.107-116
|
2011 |
Buckling of composite perforated plates.
In: Advances in Aircraft Structures
IIUM Press
. ISBN 978-967-418-148-2
, pp.117-124
|
2011 |
Propeller blade stress analysis using CATIA.
In: Advances in Aircraft Structures
IIUM Press
. ISBN 978-967-418-148-2
, pp.30-36
|
2011 |
Lateral crushing of composite fuselages.
In: Advances in Aircraft Structures
IIUM Press
. ISBN 978-967-418-148-2
, pp.37-44
|
2011 |
Buckling of long column.
In: Advances in Aircraft Structures
IIUM Press
. ISBN 978-967-418-148-2
, pp.150-157
|
2011 |
Buckling of thin walled sections.
In: Advances in Aircraft Structures
IIUM Press
. ISBN 978-967-418-148-2
, pp.158-166
|
2011 |
Effect of boundary conditions on the buckling behavior of perforated plates.
In: Advances in Aircraft Structures
IIUM Press
. ISBN 978-967-418-148-2
, pp.167-173
|
2011 |
Effect of cutout shape on the critical buckling load of a perforated plate.
In: Advances in Aircraft Structures
IIUM Press
. ISBN 978-967-418-148-2
, pp.174-181
|