Researchers
Staff Details
- Engineering Tech ~ Engineering And Technology ~ Mechanical Engineering ~ Mechanical Control
- Engineering Tech ~ Applied Sciences And Technologies ~ Aerospace ~ Aerospace Manufacturing (Including Manufacturing of Transportation Component for Defence and Security System e.g Rotary and Fixed Wing and Instrumentation Manufacturing such as On-Board Computer for Satellites)
AEROSPACE ENGINEERING LAB 1 | 2010/2011 2011/2012 2012/2013 2013/2014 2014/2015 2015/2016 2016/2017 |
AEROSPACE ENGINEERING LAB 3 | 2024/2025 |
AEROSPACE ENGINEERING LAB IV | 2013/2014 2014/2015 2015/2016 2016/2017 2017/2018 2018/2019 2019/2020 2020/2021 2021/2022 2022/2023 2023/2024 2024/2025 |
AEROSPACE PROPULSION | 2013/2014 2014/2015 2015/2016 2016/2017 2017/2018 2018/2019 2019/2020 2020/2021 2021/2022 2022/2023 2023/2024 2024/2025 |
AEROSPACE VEHICLE DESIGN | 2015/2016 |
AUTOMOTIVE ENGINEERING LAB II | 2011/2012 2013/2014 |
COMPUTATIONAL FLUID DYNAMICS | 2014/2015 2017/2018 |
FLIGHT MECHANICS | 2008/2009 2022/2023 2023/2024 2024/2025 |
FLUID MECHANICS | 2008/2009 |
LAUNCH VEHICLE TECHNOLOGY | 2011/2012 2012/2013 |
MECHANICS OF MATERIALS | 2008/2009 |
OIL AND GAS INDUSTRIES | 2023/2024 |
PRINCIPLES OF FLIGHT | 2008/2009 2009/2010 2010/2011 2011/2012 2012/2013 2013/2014 2014/2015 2015/2016 2016/2017 2017/2018 2018/2019 2019/2020 2020/2021 2021/2022 2022/2023 2023/2024 |
PROJECT I | 2009/2010 2010/2011 2018/2019 2020/2021 2021/2022 2022/2023 2023/2024 2024/2025 |
PROJECT II | 2009/2010 2010/2011 2018/2019 2019/2020 2023/2024 2024/2025 |
PROPULSION SYSTEM | 2013/2014 |
RENEWABLE ENERGY | 2012/2013 2014/2015 2017/2018 |
ROTORCRAFT AERODYNAMICS | 2013/2014 |
SPECIAL TOPICS IN MECHANICAL ENGINEERING | 2011/2012 |
THERMOFLUID ENGINEERING | 2008/2009 2009/2010 2010/2011 2011/2012 2012/2013 |
Completed |
|
---|---|
2014 - 2016 | Design and Implementation of a Position and Speed Controller Based on Neuro-Fuzzy Approach |
2014 - 2016 | Design and Implementation of a Position and Speed Controller Based on Neuro-Fuzzy Approach |
2014 - 2016 | Low Earth Orbit for Remote Sensing Application |
2014 - 2016 | Low Earth Orbit for Remote Sensing Application |
2013 - 2014 | Guidance, Navigation and Control for Autonomous In-Orbit Assembly of Multiple Spacecraft |
2013 - 2014 | Guidance, Navigation and Control for Autonomous In-Orbit Assembly of Multiple Spacecraft |
2012 - 2014 | Design Optimization of a Low-Cost Air-Launch system for Nano and Pico Satellites |
2012 - 2015 | Investigation of Flow-Induced Pulsation in Piping Networks of Gas Transportation Systems |
2012 - 2015 | Investigation of Flow-Induced Pulsation in Piping Networks of Gas Transportation Systems |
2012 - 2014 | Design Optimization of a Low-Cost Air-Launch system for Nano and Pico Satellites |
2011 - 2014 | Theoretical and Experimental Analysis of Non-turbine Micro Wind Energy Harvesting |
2011 - 2014 | RU 2011: Proton Exchange Membrane (PEM) Fuel Cell Control Using Model Predictive Technique |
2011 - 2014 | Theoretical and Experimental Analysis of Non-turbine Micro Wind Energy Harvesting |
2011 - 2014 | RU 2011: Proton Exchange Membrane (PEM) Fuel Cell Control Using Model Predictive Technique |
2010 - 2011 | Development of a Multiphysics Model for Thermoelectricity Controlled MEMS-based Microthrusters. |
2010 - 2011 | Preliminary Analysis of Micro Energy Conversion System (MWECS) |
2010 - 2011 | Development of a Multiphysics Model for Thermoelectricity Controlled MEMS-based Microthrusters. |
2010 - 2011 | Preliminary Analysis of Micro Energy Conversion System (MWECS) |
2009 - 2011 | Analysis and Modelling of Proton Exchange Membrane (PEM) Fuel Cell System |
2009 - 2011 | Analysis and Modelling of Proton Exchange Membrane (PEM) Fuel Cell System |
2009 - 2011 | Analysis of Stability and Control Strategies for an Autonomous Unmanned Aerial Vehicle (UAV) |
2009 - 2011 | Analysis of Stability and Control Strategies for an Autonomous Unmanned Aerial Vehicle (UAV) |
Article |
|
---|---|
2021 | Optimization of fuel economy for a multimode plug-in hybrid electric vehicle using Atkinson thermodynamic cycle engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences |
2021 | Model predictive control for regulating fuel cell stack temperature and air flow rate. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences |
2021 | A review of HVAC system optimization and its effects on saving total energy utilization of a building. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences |
2021 | Energy efficiency and optimization of buildings for sustainable development in Malaysia. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences |
2019 | Performance analysis of a small capacity horizontal axis wind turbine using QBlade. International Journal of Recent Technology and Engineering (IJRTE) , 7 (6S) pp.153-157 |
2019 | Satellite attitude tracking control using Lyapunov control theory. International Journal of Recent Technology and Engineering (IJRTE) , 7 (6S) pp.253-257 |
2019 | Optimization of driving mode switching strategy for a multimode plug-in hybrid electric vehicle. International Journal of Recent Technology and Engineering (IJRTE) , 7 (6S) pp.44-47 |
2018 | Trajectory tracking of quaternion based quadrotor using model predictive control. International Journal of Engineering and Technology (UAE) , 7 (4.13) pp.125-128 |
2017 | Investigation of Malaysian low earth orbits for remote sensing applications. IOP Conference Series: Materials Science and Engineering , 184 (012009) pp.012009-1 |
2016 | A parametric study of neck moment response in a 3 year old child subjected to oblique side impact.. ARPN Journal of Engineering and Applied Sciences , 11 (8) pp.5126-5133 |
2016 | Development and optimization of passenger car front profile using polynomial response surface method. ARPN Journal of Engineering and Applied Sciences , 11 (8) pp.5161-5166 |
2015 | Power management controller for hybrid electric vehicle using fuzzy logic. ARPN Journal of Engineering and Applied Sciences , 10 (21) pp.9682-9687 |
2015 | Vehicle profile optimization using central composite design for pedestrian injury mitigation. Applied Mathematics & Information Sciences , 9 (1) pp.197-204 |
2015 | Evaluation of Orifice Flow Meter Accuracy under Pulsation Conditions. Advanced Materials Research , 1115 pp.472-475 |
2015 | Design, fabrication and flight testing of a surveillance UAV. Advanced Materials Research , 1115 pp.450-453 |
2015 | Numerical simulation and validation of high-speed turbulent and chemically-reacting flows. International Journal of Engineering Systems Modelling and Simulation , 7 (2) pp.111-124 |
2015 | Numerical simulation of supersonic and turbulent combustion with trans-verse sonic fuel injection. International Journal of Engineering Systems Modelling and Simulation , 7 (2) pp.35-61 |
2015 | Computational analysis of air intake system for internal combustion engine in presence of acoustic resonator. ARPN Journal of Engineering and Applied Sciences , 10 (22) pp.9468-9475 |
2015 | Modeling and analysis of flutter-based thin-film cantilever microgenerator. ARPN Journal of Engineering and Applied Sciences , 10 (21) pp.9688-9697 |
2014 | Validation of pedestrian impactor testing upon hybrid vehicle front end profile. International Journal of Vehicle Systems Modelling and Testing , 9 (3/4) pp.342-351 |
2014 | Head injury mitigation of an adult and child pedestrian in a frontal vehicle impact using response surface methodology. Applied Mechanics and Materials , 575 pp.952-955 |
2014 | Lateral side impact crash simulation of restrained 3 year old child. Applied Mechanics and Materials , 663 pp.590-595 |
2014 | Effect of varying design options on the transient behavior of a hybrid rocket motor. Journal of Aerospace Technology and Management , 6 (1) pp.69-82 |
2014 | Constrained model predictive control for proton exchange membrane fuel cell. Journal of Mechanical Science and Technology , 28 (9) pp.3855-3862 |
2014 | Fuel cell starvation control using model Predictive technique with laguerre and exponential weight functions. Journal of Mechanical Science and Technology , 28 (5) pp.1995-2002 |
2014 | Injury analysis validation of a deformable vehicle front end model. Applied Mechanics and Materials , 465-66 pp.1334-1338 |
2014 | Optimisation of vehicle front-end geometry for adult and pediatric pedestrian protection. International Journal of Crashworthiness pp.1-9 |
2014 | Parameter study of neck force in restrained 3 year old child involved in vehicle side impact. Australian Journal of Basic and Applied Sciences , 8 (9) pp.145-154 |
2014 | Neck moment characterization of restrained child occupant at realistic nontest standard higher impact speed of 32.2 km/h. International Journal of Vehicular Technology , 2014 pp.1-8 |
2014 | Parametric study for head injury criteria response of three-year olds in a child restraint system in oblique and lateral intrusive side impact. International Journal of Crashworthiness , 2014 pp.1-11 |
2014 | Neck moment response characterization of restrained child occupant at standard test impact speed 24.4 km/h. Research Journal of Applied Sciences, Engineering and Technology , 8 (1) pp.113-119 |
2014 | Development of economical vehicle model for pedestrian-friendly front-end profile study. International Journal of Simulation Modelling , 13 (4) pp.419-432 |
2013 | Injury analysis validation of a deformable vehicle. Applied Mechanics and Materials , 465/66 pp.1334-1338 |
2013 | Crash kinematics and injury criteria validation for a deformable hybrid vehicle model. Applied Mechanics and Materials , 663 pp.627-631 |
2013 | Two-dimensional flow properties of micronozzle under varied isothermal wall conditions . International Journal of Engineering Systems Modelling and Simulation , 5 (4) pp.174-180 |
2012 | One-dimensional analysis of thermoelement exposed to lateral heat transfer as a wall in MEMS-based thermoelectrically controlled micronozzle. International Journal of Engineering Systems Modelling and Simulation , 4 (4) pp.163-168 |
2012 | Design optimization of Micro Air Launch Vehicle using differential evolution. Journal of Aerospace Technology and Management , 4 (2) pp.185-196 |
2011 | Air supply system transient model for proton exchange membrane fuel cell . International Journal of Vehicle systems Modelling and Testing , 6 (3/4) pp.396-407 |
2011 | Particle swarm optimization of micro air launch vehicle trajectory. Canadian Aeronautics and Space Journal , 57 (2) pp.115-120 |
2011 | Vehicle fuel consumption and emission modelling: an in-depth literature review. International Journal of Vehicle Systems Modelling and Testing , 6 (3/4) pp.318-392 |
Conference or Workshop Item |
|
2021 | Optimization of fuel economy for a multimode plug-in hybrid electric vehicle. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21) |
2021 | Computational prediction of the performance map of a transonic axial flow compressor. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21) |
2019 | Optimization of driving mode switching strategy for a multimode plug-in hybrid electric vehicle. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18) |
2018 | Transient flow in a compressor blade row for a periodic vibration motion. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017) |
2018 | Satellite attitude tracking control using thrusters and momentum wheels. In: 4th International Conference on Mechanical, Automotive, and Aerospace Engineering 2018 (ICMAAE’18) |
2017 | Trajectory tracking in quadrotor platform by using PD controller and LQR control approach. In: 6th International Conference on Mechatronics (ICOM'17) |
2017 | Design optimization of a hybrid electric vehicle powertrain. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE 2016 |
2017 | Numerical investigation of magnetic nanoparticles trajectories for magnetic drug targeting. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16) |
2017 | Dynamics and control of quadcopter using linear model predictive control approach. In: 1st AEROS Conference 2017 |
2017 | Quadrotor trajectory tracking using PID cascade control. In: AEROS Conference 2017 |
2014 | Development and optimization of a vehicle front-end geometry model for improved pedestrian safety. In: International Conference on Automotive and Vehicle Technologies (AVTECH '14) |
2014 | Improving the efficiency of poly-crystalline photovoltaic module using special transparent glass covers . In: International Meeting on Advances in Thermofluids |
2014 | Response surface approach for sensitivity study of neck forces in restrained child occupant during side-impact crash. In: 3rd International Conference on Materials Engineering and Automatic Control, ICMEAC 2014 |
2014 | Orifice plate flowmeter performance under pulsating flow conditions. In: Automotive and Vehicle Technologies Conference (AVTECH) 2013 |
2013 | Experimental investigation of the performance of flutter-based microgenerators. In: 11TH INTERNATIONAL ENERGY CONVERSION ENGINEERING CONFERENCE |
2013 | Hybrid rocket performance with varying additive concentrations. In: 49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference |
2013 | Black box nonlinear model predictive control using recurrent neural network. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013) |
2013 | Effectiveness of wheel-typed grain design for hybrid rocket motor performance. In: Recent Advances in Energy, Environment and Development Conference |
2013 | Frequency estimation of flow induced vibration in thin cantilever plate. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013) |
2013 | Simulation of wheel type fuel grain in hybrid rocket motor. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013) |
2013 | Three-dimensional vibration analysis of fluid-filled pipes. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013) |
2012 | Development of generic algorithm in wheel-typed hybrid rocket grain design for performance estimation. In: Advances in Environment, Computational Chemistry and Bioscience |
2011 | Particle swarm optimization of air-launch vehicle and trajectory. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11) |
2011 | On the scaling of air launch vehicles. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11) |
2011 | One dimensional analysis of thermoelement exposed to lateral heat transfer as a wall in MEMS-Based thermoelectrically controlled micronozzle. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11 |
2011 | Two-dimensional flow properties of micronozzle under varied isothermal wall conditions. In: International Conference on Mechanical, Automotive and Aerospace Engineering, ICMAAE’11 |
2011 | Air supply system transient model for proton exchange membrane fuel cell. In: International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE' 11) |
2010 | Dynamic thermal model for proton-exchange membrane fuel cell. In: International Conference on Sustainable mobility 2010 |
Book |
|
2013 | Towards a numerical simulation of supersonic mixing & combustion. LAP Lambert Academic Publishing . ISBN 9783659387043 |
Book Section |
|
2011 | Introduction to compressors. In: Selected topics in aerospace engineering IIUM Press . ISBN 9789674181451 , pp.4-8 |
2011 | Three-dimensional analysis of compressors. In: Selected topics in aerospace engineering IIUM Press . ISBN 9789674181451 , pp.15-19 |
2011 | Rotating stall and surge. In: Selected topics in aerospace engineering IIUM Press . ISBN 9789674181451 , pp.20-26 |
2011 | Modeling of compression systems. In: Selected topics in aerospace engineering IIUM Press . ISBN 9789674181451 , pp.27-33 |
2011 | Compressor models. In: Selected topics in aerospace engineering IIUM Press . ISBN 9789674181451 , pp.34-39 |
2011 | Two-dimensional analysis of compressors. In: Selected topics in aerospace engineering IIUM Press . ISBN 9789674181451 , pp.9-14 |
2011 | Design of an autopilot for an autonomous unmanned aerial vehicle. In: Mechatronics book series: Selected papers from ICOM'01, ICOM'05 and ICOM'08 IIUM Press . ISBN 9789670225685 , pp.59-68 |
2011 | Surge and rotating stall. In: Selected topics in aerospace engineering IIUM Press . ISBN 9789674181451 , pp.40-47 |
2011 | Unstructured finite volume for two-dimensional navier stokes equations. . In: Advanced Numerical Techniques in Engineering and Science IIUM Press . ISBN 978-967-418-020-1 , pp.43-98 |
Advanced Search