Staff Directory


Md. Abdul Maleque

Academic Qualification

  • Ph.D in Materials - Doctor of Philosophy, Universiti Malaya (UM)
  • Master of Science in Metallurgical Engineering - Masters Degree, Bangladesh University of Engineering & Technology, Dhaka
  • Bachelor of Science in Metallurical Engineering - Bachelor Degree, Bangladesh University of Engineering & Technology, Dhaka

Md. Abdul Maleque (Prof. Dr.)

Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING


maleque@iium.edu.my
5785


Expert Profile


Dr. Md Abdul Maleque is a Professor in Materials Engineering, Advisor of Advanced Materials & Surface Engg. Research Unit (AMSERU), Faculty of Engineering, International Islamic University Malaysia (IIUM). He started his career as a lecturer in 1995 at the Faculty of Engineering, University of Malaya, Malaysia. Since then, he has served in various teaching and research capacities with University of Malaya and Multimedia University until 2007. He then joined IIUM in 2009 and was engaged actively in teaching, research, supervision, administrative work, securing national and international research grants and publishing research findings in reputed journals. Prof Maleque was the section Editor for 'Encyclopedia on Renewable & Sustainable Materials' Elsevier publisher. He is the Chairman of TC on Standardization of Alloy Steel in Department of Standard Malaysia (DSM), Malaysia.
Prof. Maleque is the executive committee and life member of Malaysian Tribology Society (MYTRIBOS). He is also a member of several professional bodies and organizations such as IMechE, IAENG and MySET. He served on the international advisory committee of ICAMME2013 conference, co-chair of ICAMME2019, secretary of ICAMME2014, publication committee of MITC2013, technical committee of AMPT2009, and technical committee chairman of ICOMAST2006 and RTC2011. He is on the Editorial Board of Industrial Lubrication and Tribology. He has been actively engaged in research with team members, (completed 15 projects as PI and 10 projects as Co-Researcher) and secured total amount of grant RM4,718,343.00 under grant schemes of RMGS, Newton Fund, IDBs, PRGS, ERGS, FRGS, eScience, RCG and RMCIIUM. He has published more than 300 technical papers in different journals and conference proceedings and written a text book on Materials Selection and Design and edited seven academic academic books on engineering and to date his research works have received 5,000+ citations (in Google Scholar, with h-index = 35). He has delivered over 20 invited lectures in home and abroad and several keynotes in international conferences which clearly demonstrate an extensive and established reputation of excellence in research. He also established collaboration between Atatürk University Turkey; Strathclyde University UK; NanoMalaysia Bhd; TNB R&D Bhd and IOP Sdn Bhd.   He was the recipient of highest citation indexed award 2014 from IIUM, IIUM Quality Research award 2013 from IIUM, Vice Chancellor award from UM, Dean’s award from UM and several international and national level awards. He has been working in the Technical Committee on Alloy Steel Standardization, SIRIM, Malaysia to develop Malaysian standards since 2009. Prof. Maleque developed new programmes (at MMU) for that he was the founder programme head and new courses (at IIUM, MMU and UM) as well. Numerous presentations have been made by Prof Maleque at different forums, conferences, symposium, universities and institutions. He also worked as an external examiner for both PhD and MSc thesis and assessor for the academic staff promotion. He has completed several consultancy works/projects both at IIUM and UM.


Area of Specialisation


  • Engineering Tech ~ Engineering And Technology ~ Mechanical Engineering ~ Industrial Tribology - Sustainable composite materials
  • Engineering Tech ~ Applied Sciences And Technologies ~ Engineering Materials ~ Other Engineering Materials n.e.c. - Materials for automotive and energy;
  • Natural Science ~ Material Sciences ~ Advanced Materials ~ Metals and Metal Alloy Materials - Surface modification of metallic material
  • Engineering Tech ~ Applied Sciences And Technologies ~ Engineering Materials ~ Other Engineering Materials n.e.c. - Materials characterization
  • Natural Science ~ Material Sciences ~ Advanced Materials ~ Composite Materials - Advanced composite for automotive brake rotor


Professional Membership


  • 2002 - 2006: Member of Profesional Body / Association: (Member), Asian Tribology Council (ATC)
  • 2007 - 2027: Member of Profesional Body / Association: (Life Member), Malaysian Tribology Society (MyTRIBOS)
  • 2010 - 2023: Member of Profesional Body / Association: (Member), Internation Association of Engineers
  • 2012 - 2021: Member of Profesional Body / Association: (A. Member), Malaysian Society for Engineering & Technology (MySET)
  • 2015 - 2022: Member of Profesional Body / Association: (CEng, Member), IMechE, UK
  • 2019 - 2022: Member of Profesional Body / Association: (G. Member), Board of Engineers Malaysia
  • 2020 - 2022: Member of Profesional Body / Association: (Associate Fellow), Academy of Sciences Malaysia
  • 2021 - 2021: Member of Profesional Body / Association: (Member), Asian Council of Science Editors
  • 2022 - 2024: Member of Profesional Body / Association: (Fellow), IMechE (UK)


Teaching Responsibilities


ADVANCED COMPOSITE MATERIALS 2018/2019 2017/2018 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010
ADVANCED MATERIALS CHARACTERIZATION 2017/2018 2016/2017 2015/2016 2014/2015 2010/2011 2009/2010
ADVANCED METALLIC MATERIALS 2018/2019 2017/2018 2016/2017
COMPONENT DESIGN AND MATERIALS SELECTION 2023/2024 2022/2023
FINAL YEAR PROJECT I 2019/2020 2018/2019
FINAL YEAR PROJECT II 2023/2024 2022/2023 2019/2020
FOUNDRY JOINING 2013/2014
INTEGRATED DESIGN PROJECT 2023/2024 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016
INTERGRATED DESIGN PROJECT 2023/2024 2022/2023
MANUFACTURING ENGINEERING LAB I 2010/2011 2009/2010
MATERIALS ENGINEERING LAB 4 2023/2024 2022/2023
MATERIALS ENGINEERING LAB IV 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019
MATERIALS LABORATORY I 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012
MATERIALS PROCESS DESIGN 2003/2004
MATERIALS SELECTION AND DESIGN 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010
POWDER METALLURGY 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013 2011/2012 2010/2011 2009/2010
PRODUCTION OF FERROUS AND NON-FERROUS 2009/2010
PROJECT II 2013/2014 2012/2013
RESEARCH METHODOLOGY & SEMINAR 2023/2024 2022/2023 2021/2022 2020/2021
RESEARCH METHODOLOGY & SEMINAR IN MAT ENG (MIXED MODE) 2022/2023 2021/2022 2020/2021 2019/2020
RESEARCH METHODOLOGY & SEMINAR IN MAT ENG (RESEARCH MODE) 2020/2021 2019/2020
RESEARCH METHODOLOGY & SEMINAR IN MAT ENG (RESEARCH) 2023/2024 2022/2023 2021/2022
RESEARCH METHODOLOGY & SEMINAR IN MFG ENG (MIXED MODE) 2021/2022 2019/2020
RESEARCH METHODOLOGY & SEMINAR IN MFG ENG (RESEARCH) 2023/2024 2022/2023 2021/2022
Research Methodology and Seminar 2023/2024 2022/2023 2021/2022 2019/2020
RESEARCH METHODOLOGY AND SEMINAR IN MFG ENG (RESEARCH MODE) 2019/2020
SEMINAR 2012/2013 2003/2004
SEMINAR I 2012/2013 2011/2012 2010/2011
SEMINAR II 2012/2013
SMART MATERIALS 2003/2004
SURFACE ENGINEERING AND TRIBOLOGY 2015/2016
WASTE MATERIALAS PROCESSING 2018/2019 2017/2018
WASTE MATERIALS PROCESSING 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019


Supervision


Comparative Analysis Of Building Integrated Solar Water Heating Systems.
Ph.D Completed 2023 Main Supervisor
Characterization Of Waste Marble And Graphene Oxide Reinforced Lm6 Aluminum Composites Fabricated By Stir Squeeze Casting Process.
Ph.D Completed 2022 Main Supervisor
Characterization And Evaluation Of Heat Affected Zone For Tig Torch Welded High Strength Low Alloy Steel With Microalloying Elements Addition.
Ph.D Completed 2021 Main Supervisor
Surface Modification Of Duplex Stainless Steel Using Tig Torch And Nitriding Processes For Tribological Applications.
Ph.D Completed 2019 Main Supervisor
Characterization, Properties And Degradation Of Hot-Pressed Fabricated Rattan Waste Binderless Board.
Ph.D Completed 2019 Co-supervisor
Development Of Tic / Nip Hbn Composite Coating For High-Temperature Tribological Applications.
Ph.D Completed 2017 Main Supervisor
Optimization Of Stir Casting Process Parameters Of Aluminium Silicon Carbide Particulate Composites.
Ph.D Completed 2016 Main Supervisor
Influence Of Processing Parameters On The Properties Of Aisi 4340 Steel Coated With Tic Powder Fabricated By Tungsten Inert Gas Arc Melting.
Ph.D Completed 2016 Main Supervisor
Theoretical Modeling Of Process Performance In Micro Electro Discharge Machining For Nonconductive Ceramic Materials.
Ph.D Completed 2015 Co-supervisor
Development Of Carbon Nanotube Aluminium Nano-Composite For Brake Disc Application.
Ph.D Completed 2014 Main Supervisor
Investigation On The Effectiveness Of Diamond Reinforcement In Strenghthening Porous Aluminium.
Ph.D In Progress Co-supervisor
Development Of Cement/Rha-Derived Nano-Silica For Co2 Regeneration Capture.
Ph.D In Progress Co-supervisor
Corrosion-Wear Simulation Of Automotive Engine Component Materials Under Biodiesel.
Master Completed 2022 Co-supervisor
Modified And New Iterative Method In Solving Linear And Nonlinear Differential Equations .
Master Completed 2022 Co-supervisor
Knowledge Based System For Structural Bridge Truss Material Selection.
Master Completed 2020 Main Supervisor
The Development Of Polypropylene Composites Reinforced Micro And Nanoalumina Filler From Industrial Waste.
Master Completed 2016 Co-supervisor
Development And Characterization Of Hard Coating Layer On Cp-Ti Using Fe-C-Si Powder Mixture.
Master Completed 2015 Main Supervisor
The Development Of Sago Starch/Kenaf Fiber Biocomposite Films.
Master Completed 2015 Co-supervisor
Development Of Hybrid Kenaf-Glass Reinforced Upe Composite For Structural Application.
Master Completed 2014 Main Supervisor
Tribo-Corrosion Behavior Of Tic Coated Aisi 4340 Steel In Jatropha Curcas Biodiesel.
Master Completed 2014 Main Supervisor
Mechanical And Thermal Properties Of Sic Reinforced Aluminium Copper Matrix Composite Materials For Automotive Piston Application.
Master Completed 2013 Main Supervisor
Thermo-Mechanical Analysis Of Multiple-Particle Size (Mps) Sic Reinforced Aluminium Matrix Composite (Amc) Brake Rotor.
Master Completed 2012 Main Supervisor
Effect Of Nanoclay On The Mechanical And Thermal Properties Of Kenaf Fibre Reinforced Polylactiacid Acid(Pla) Hybrid Biocomposite.
Master Completed 2012 Co-supervisor
Hybrid Esic-Graphane Oxide Coating On Ti-Alloy Using An Addictive Manufacturing Method.
Master In Progress Main Supervisor
Surface Passivation Of Porous Niti Shape Memory Alloy Via Thermal Oxidation.
Master In Progress Co-supervisor


Research Projects


Completed
2021 - 2023 Corrosive-wear Performance Evaluation of Automotive Component Materials Under Palm Oil Biodiesel Condition
2019 - 2023 UNRAVELLING CATALYTIC MECHANISM OF HIGH ENTROPY ALLOYS (HEAs) FOR ENERGY-EFFICIENT AZO DYE REMOVAL IN FENTON REACTION
2017 - 2019 Eco-silicon Carbide Reinforced Aluminium Matrix Composite for Automotive Brake Disc Application
2015 - 2018 Surface Coating of Duplex Stainless Steel Using Nitriding and TIG Torch Melting Techniques - A Comparative Study
2015 - 2018 Precision Control of KERF in Micro Wire Electro Discharge Machining with Dry Dielectric Fluid
2015 - 2018 Fundamental Study of Mechanical Behavior of Aluminum Foam Sandwich in Structural Parts for Automotive
2014 - 2017 Effect of Irradiation Processing Route to the Improvement Properties of Green Recycled Polypropylene
2014 - 2018 Wear Resistance Enhancement of Wind Turbine Blade Materials under Sand Impact
2012 - 2016 Characterization of Tribo-Corrosion using Jatropha Curcas Linnaeas Biodiesel for Automotive Engine Compenent Materials
2012 - 2015 Prototype Development of Light Weight Aluminium Matrix Composite Automotive Brake Rotor
2012 - 2014 Micro-Structuring of Nonconductive Ceramic Materials using Micro-EDM with Pyrolytic Carbon in Dielectric Fluid
2011 - 2012 Thermo-Mechanical Properties of Al-Cu Matrix Composite with Varying Particle Size SiC Reinforcement for The Application of Automotive Piston
2011 - 2013 Electro-Discharge Machining of Nonconductive Ceramic Materials
2011 - 2014 RU 2011: Characterization of Recast Layer Formed on Ceramic Materials Due to Electro Discharge Machining
2011 - 2017 Erosion Corrosion and Tribological Behaviour of TIG Torch Processed Composite Layers
2011 - 2012 Characterization Of Ceramic Materials After Machining By EDM
2010 - 2016 Cladding of Low Alloy Steel Surfaces with Superalloy via TIG Torch Melting Technique
2010 - 2011 The development of an optimum material selection and conceptual design process for automotive piston-cylinder liner
2010 - 2013 Fundamental Study of New Eco-core Metal Matrix Composite Sandwich Structure
2010 - 2012 Effect of Inhibitors on the Corrosion of Automotive Materials under Palm Oil Biodiesel
2009 - 2011 Simulation and Fabrication of SiC Reinforced Aluminium Metal Matrix Composite (SiC-AMC)Automotive Brake rotor
2009 - 2010 Reverse Engineering of Child Bicycle
On-Going
2023 - Present Investigating the wear mechanism of the duplex stainless steel coated with TiC nanoparticles through TIG torch melting method
2023 - Present Formulation of Ternary rGO/Mixed Transition Metal Oxide (NiCo2O4/MnCo2O4)-based Carbon Fabric for High-Performance All-Solid-State Supercapacitors in Electric Vehicles
2022 - Present Increasing the Performance and Service Life of a Diesel Engine Fuel Injector by Surface Modification
2021 - Present Hybrid eSiC-graphene oxide coating mechanism on Ti-alloy to enhance properties using an additive manufacturing method
2019 - Present Regeneration behaviour of nanosilica with concrete waste via natural self-healing route for capturing CO2
2009 - Present Advanced Materials and Surface Engineering (AMSERU)


Award & Recognition


23 Jan, 2024 Best Paper Award - Semarak Ilmu Publishing International
20 Jan, 2024 Section Editor - Deer Hill Publications International
10 Jan, 2024 Reviewer Board Member of paperASIA (SCOPUS) - Others National
23 Oct, 2023 World's Top 2% Scientists - Elsevier Publisher International
01 Jul, 2023 International Scientific Committee - Organizer of ICASET 2023 Oman International
11 Apr, 2023 International Technical Committee - Organizer of ICNNN 2023 International
01 Apr, 2023 SCIENTIFIC AND TECHNICAL COMMITEE_TWF - TWA Africa (Welding Federation) International
30 Mar, 2023 Panel Evaluator - International Islamic University Malaysia University
20 Mar, 2023 Section Editor - Deer Hill Pubr International
02 Mar, 2023 PANEL JURI CITReX 2023 - University Malaysia Pahang National
01 Mar, 2023 Guest Editor of Nanomaterials - Multidisciplinary Digital Publishing Institute (MDPI) International
20 Feb, 2023 IIUM Panel Evaluator - International Islamic University Malaysia University
22 Dec, 2022 JUDGE for KERICE2022 - KOE, IIUM KCDIO
28 Oct, 2022 World's Top 2% Scientists - Elsevier Publisher International
25 Jul, 2022 Top 10 Contributor's to IIUM Research - KOE KCDIO
01 Jun, 2022 International Scientific Committee - Organizer of ICASET 2022 Oman International
30 May, 2022 - International Islamic University Malaysia University
26 May, 2022 International Technical Committee Member - Organizer of ICNNN, Japan International
09 Apr, 2022 Judge for 3MT - KOE, IIUM KCDIO
31 Mar, 2022 IIUM Panel Evaluator - International Islamic University Malaysia University
31 Mar, 2022 Panel Evaluator - International Islamic University Malaysia University
11 Mar, 2022 Juri Hakim (Judge Panel) - University Malaysia Pahang National
01 Mar, 2022 Guest Editor - MDPI, Basel, Switzerland International
19 Jan, 2022 IIUM Panel Evaluator - Others University
26 Nov, 2021 Fellow - Institution of Mechanical Engineers, UK International
09 Oct, 2021 Editorial Board Member - Universiti Malaysia Pahang International
13 Sep, 2021 Chairman of Technical Committee on Alloy Steel - Others National
01 Sep, 2021 Fellow - Royal Academy of Engineering, UK International
30 Apr, 2021 Judge 3MT - KOE, IIUM KCDIO
13 Apr, 2021 International Technical Committee - Organizer of ICNNN, Japan International
30 Mar, 2021 Industrial Award 2021 - Malaysian Tribology Society (MYTRIBOS) National
16 Mar, 2021 Internal Assessor - KOE, IIUM KCDIO
15 Mar, 2021 Judge Hakim (Judge Panel) - Universiti Malaysia Pahang National
27 Feb, 2021 FRGS Review Panel (University Level) - International Islamic University Malaysia University
23 Dec, 2020 Board of Examiner - SRI SIDDHARTHA ACADEMY OF HIGHER EDUCATION INDIA International
20 Nov, 2020 Leader Curriculum Review Committee of PG - Kulliyyah of Engineering KCDIO
09 Nov, 2020 Associate Fellow - Academy of Sciences Malaysia National
28 Oct, 2020 Chairman of TC on Alloy Steels - Department of Standard Malaysia National
21 Jul, 2020 Examiner for IDP, KOE - KOE KCDIO
30 Jun, 2020 Assessor for Master of Science in BioTech Engg - Others University
04 Mar, 2020 Judge for MLC - Kulliyyah of Engineering, IIUM KCDIO
23 Jan, 2020 Juri Hakim (Judge Panel) - University Malaysia Pahang National
08 Jan, 2020 Panel for FRGS/PRGS grants applications - University Malaysia Pahang National
06 Jan, 2020 Editorial Board Member - University Malaysia Pahang National
24 Dec, 2019 Leaders-in-innovative fellowship Award 2020 - Royal Academy of Engineering, UK International
18 Sep, 2019 Gold Award from KERICE - KOE, IIUM KCDIO
12 Feb, 2019 Juri Hakim (Judge Panel) - University Malaysia Pahang National
14 Dec, 2018 Judge for IDP, KOE - KOE, IIUM KCDIO
08 Dec, 2017 Sijil Penghargaan - SITIM STS National
09 Aug, 2017 Pitch Your Product 2017 - IIUM University
10 Apr, 2017 Sijil Penghargaan - SIRIM National
15 Mar, 2017 Juri Hakim (Judge Panel) - University Malaysia Pahang National
18 Feb, 2017 The Invention and Innovation Award (Gold) - Private National
16 Feb, 2017 Bronze Award for innovation/invention - Malaysian Associations of Research Scientist National
16 Feb, 2017 Gold Medal Award for innovation/invetion - Private National
10 Feb, 2017 Assessor Research Grant - Kulliyyah of Engineering KCDIO
06 Feb, 2017 Sijil Penghargaan - SIRIM STS Sdn Bhd National
01 Feb, 2017 Evaluation Panel member for FRGS Application - UMP National
30 Jan, 2017 Evaluator of FRGS Project Proposal - Universiti Malaysia Pahang(UMP) National
18 Dec, 2016 Section Editor of Encyclopedia on Renewable and Sustainable Materials - Elsevier Ltd International
13 Dec, 2016 Section Editor - Elsevier Int. International
21 Nov, 2016 Examiner for Peperiksaan Lisan - University Malaysia Pahang National
08 Nov, 2016 Session Chair for AMPT 2016 - University Malaya International
01 Sep, 2016 Panelist for foroum on 'Islamization of Engineering Education - Kulliyyah of Engineering KCDIO
29 Aug, 2016 Chief Editor of Engineering Research with Ethics and Values - International Islamic University Malaysia University
01 Jul, 2016 Editorial Board Member - J of Materials & Manufacture, Deer Hill Pubr International
01 Jun, 2016 Associate editor International Journal of Multidisciplinary Design, Analysis and Optimization, - A D Publication International
01 Jun, 2016 Judge for Tribology Poster Competition - University of Malaya International
29 Mar, 2016 MOHE Panel for Research Grant Evaluation - Ministry of Education National
28 Mar, 2016 IIUM Panel Evaluator - International Islamic University Malaysia University
06 Dec, 2015 Silver Award - Ministry of Higher Education National
22 Oct, 2015 Session Chair for ICBTS 2015 at Berlin Germany - ICBTS International
21 Oct, 2015 Judge for KERIE - KOE KCDIO
05 Oct, 2015 Speaker at MTDC-SYMBIOSIS Program - Malaysian Technology Development Corporation (MTDC) National
02 Oct, 2015 University Innovation Award - International Islamic University Malaysia University
02 Oct, 2015 IRIIE 2015 Gold Medal Award - IIUM University
07 Sep, 2015 Advisory Member of ICoFM - Universiti Malaysia Perlis National
18 Aug, 2015 Session Chair - UMP International
15 Aug, 2015 Session Chair of ICMER15 - University Malaysia Pahang National
27 Oct, 2014 Panelist - KOE KCDIO
23 Sep, 2014 Keynote Speaker - KOE, IIUM KCDIO
18 Jul, 2014 Quality Award - IIUM University
13 Jun, 2014 Judge for KERIE13 - KOE, IIUM KCDIO
11 Jun, 2014 Bronze - IIUM International
29 Apr, 2014 Highest Citation in Citation Index Journal Award - IIUM University
15 Feb, 2014 Internationalisation Bureau - MYTRIBOS International
02 Dec, 2013 Guest editor, Special issue of Procedia Engineering - Elsevier Ltd, UK International
09 May, 2013 Silver Award from 24thInternational Invention & Innovation Technology Exhibition (ITEX) - Malaysian Invention & Design Society (MINDS) International
14 Mar, 2013 Quality Award - IIUM University
19 Feb, 2013 Two (2) Gold medal for exhibiting outstanding research finding to the IRIIE2013, IIUM - IIUM University
13 Feb, 2013 Reviewer for ERGS grant - KOE, IIUM KCDIO
27 Feb, 2012 Silver Award - IIUM University
27 Feb, 2012 Bronze Award - IIUM University
15 Jul, 2011 Sijil Penghargaan - SIRIM Berhad National
15 Jul, 2011 Sijil Penghargaan - SIRIM Berhad National
01 Jul, 2011 Sijil Penghargaan - SIRIM Berhad National
01 Mar, 2011 Bronze Medal - IIUM University
01 Mar, 2011 Bronze Medal - IIUM University
26 Jan, 2010 Bronze Award in IRIIE2010 Exhibition - RMC, IIUM University
30 May, 2005 Editorial Board Member of Int J. of Indust Lubr & Trib., - Emerald Pubr., UK International
18 Jun, 2003 Anugerah Khidmat Cemerlang - Universiti Malaya University
12 Mar, 1999 Sijil Dekan - Faculty of Engineering, UM University


Publications


Article

2024 Contemporary progress in the hybrid coating of titanium alloys using the liquid additive manufacturing technique. Journal of Advanced Research in Applied Mechanics, 113 (1) pp. 108-117
2024 The influence of TiC dispersion and density on the microstructural features and microhardness fused by TIG Arc process. Journal of Advanced Research in Applied Mechanics, 114 (1) pp. 33-42
2023 Improvement in effectiveness of diamond in strengthening the porous aluminium composite. Journal of Materials Research and Technology, 25 () pp. 25-37
2023 Influence of ceramic particles size on the incorporation of SiC into stainless steel material using 480 J/mm heat input for tribological applications. Jurnal Tribologi, 37 () pp. 15-28
2023 Influence of microstructure on the hardness behavior of AISI duplex-2205 composite layer by TIG cladding. Malaysian Journal of Microscopy, 19 (1) pp. 118-128
2023 Microstructure and strengthening effect of coated diamond particles on the porous aluminum composites. Materials, 16 (8) pp. 1-12
2023 Morphological and wear behavior of low temperature thermochemical gaseous nitriding process. Jurnal Tribologi, 36 () pp. 57-69
2023 Optimizing the compressive properties of porous aluminum composites by varying diamond content, space holder size and content. Materials, 16 (3) pp. 1-19
2023 Study on the optimization of surface modification processing of SiCp and tribological properties of AA6061-SiCp based composites. International Journal of Engineering Materials and Manufacture, 8 (1) pp. 1-12
2022 A systematic review on corrosive-wear of automotive components materials. Jurnal Tribologi, 35 () pp. 33-49
2022 Effects of minimum quantity lubrication technique in different machining processes-a comprehensive review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90 (2) pp. 135-159
2022 Effects of temperature on the formation of nitride surface layer via thermochemical gaseous nitriding process. Malaysian Journal of Microscopy, 18 (2) pp. 122-131
2022 Hard-hydrophobic nano-CuO coating via electrochemical oxidation for heat transfer performance enhancement. Arabian Journal for Science and Engineering, 47 (5) pp. 6013-6023
2022 Influence of ceramic particles size on the incorporation of SiC into stainless steel material using 480 J/mm heat input for tribological applications. Jurnal TRIBOLOGI, 36 () pp.
2022 Morphological and wear behavior of low temperature thermochemical gaseous nitriding process. Jurnal Tribologi, 36 () pp. 57-69
2022 Nanostructured AlGaAsSb materials for thermophotovoltaic solar cells applications. Nanomaterials, 12 (19) pp. 1-14
2022 Wear simulation of automotive engine component materials under biodiesel.. Journal of Mechanical Engineering and Sciences (JMES), 16 (4) pp. 9167 - 9174
2021 An overview on synthesis, stability, opportunities and challenges of nanofluids. Materials Today: Proceedings, 41 () pp. 30-37
2021 An overview on the importance of surface modification by TIG and lasers incorporating carbides and their relations to wear behaviours. Jurnal Tribologi, 29 () pp. 96-116
2021 Effective parameter of nano‑CuO coating on CO gas‑sensing performance and heat transfer efficiency. Arabian Journal for Science and Engineering, () pp. 1-10
2021 Effective parameter of nano‑CuO coating on CO gas‑sensing performance and heat transfer efficiency. Arabian Journal for Science and Engineering, () pp. 1-10
2021 Effective parameter of nano‑CuO coating on CO gas‑sensing performance and heat transfer efficiency. Arabian Journal for Science and Engineering, 46 () pp. 6557-6566
2021 Influence of agro-based reinforcements on the properties of aluminum matrix composites: a systematic review. Journal of Materials Science, 56 () pp. 16195-16222
2021 Optical and structural characterization of (Mn, Fe) co-doped lead chalcogenides for optoelectronics applications. Journal of Optoelectronics and Advanced Materials, 23 (11-12) pp. 564-573
2021 Preparation methods and challenges of hybrid nanofluids: a review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 78 (2) pp. 56-66
2021 Properties of aluminium/electroless ni-coated sic composites - a review. FUDMA Journal of Sciences, 5 (1) pp. 381-394
2021 Reuse of marble wastes as reinforcement phase in LM6 aluminium matrix composites for automotive applications. International Journal of Powertrains, 10 (2) pp. 188-203
2021 Review on advances in porous Al composites and the possible way forward. Journal of Materials Research and Technology, 14 () pp. 2017-2038
2021 Spin-orbit coupling effect on the electronic structure of Sr2FeHfO6 alloy for spintronics device application. Journal of Magnetism and Magnetic Materials, 518 () pp. 1-7
2021 Synthesis and characterisation of aluminium composite with graphene oxide reinforcement. IOP Conference Series: Materials Science and Engineering, 1057 () pp. 1-12
2020 Anodized nano-coating of copper material for thermal efficiency enhancement. Test Engineering and Management, 83 (May-June) () pp. 1430-1437
2020 Effect of Nano-CuO grain size on heat transfer performance of copper substrate. Test Engineering and Management, 83 (May-June) () pp. 1180-1185
2020 Effect of SiC particle size on hardness and wear behavior of TIG melted hard surface layer AISI Duplex-2205 steel. TEST Engineering & Management, 83 (May-June) () pp. 1392-1397
2020 Effective parameter of nano-CuO coating on CO gas-sensing performance and heat transfer efficiency. Arabian Journal for Science and Engineering (AJSE), xx (xx) pp. 1-5
2020 Experimental investigation on the stability of 40% ethylene glycol based TiO2-Al2O3 hybrid nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (1) pp. 110-121
2020 Friction coefficient of carbon nanotube reinforced aluminium nano-composite. Nigerian Journal of Engineering, 27 (1) pp. 25-35
2020 Hardness behaviour of carbon nanotube-aluminium nano-composite using nanoindentation technique. Materials Today: Proceedings, xx (xx) pp. 1-5
2020 Islamisation of engineering education – a case at IIUM. Universal Journal of Educational Research, 8 (2) pp. 355-361
2020 Manufacturing and friction welding of aluminium matrix composites – review of current status and future directions. TEST Engineering & Management, 83 (May-June) () pp. 1122-1130
2020 Sliding wear of SiC reinforced duplex stainless steel via TIG torch sur-face melting technique. Recent Patents on Engineering, 14 (3) pp. 366-372
2020 Sliding wear of SiC reinforced duplex stainless steel via TIG torch surface melting technique. Recent Patents on Engineering, 14 (3) pp. 366-372
2020 Thermal conductivity and viscosity of TiO2/MWCNTs (doped 10wt% graphene) - ethylene glycol based nanofluids for different ratio of nanoparticle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 72 (1) pp. 32-46
2019 Effects of particle sizes on the properties of binderless boards made from rattan furniture waste. Journal of Engineering Science, 15 () pp. 49-61
2019 Optimisation of gaseous nitriding process parameters for hard surface layer of duplex stainless steel. International Journal of Materials Engineering Innovation, 10 (3) pp. 165-185
2019 Optimization of gaseous nitriding process parameters for hard surface layer of duplex stainless steel. International Journal of Materials Engineering Innovation, 10 (3) pp. 165-185
2019 TIG torch surfacing of metallic materials – a critical review. Transactions of the IMF, 97 (1) pp. 12-21
2018 Characterization of carbon nanotube reinforced aluminium nano-composite using field emission scanning electron microscope. International Journal of Engineering Materials and Manufacture, 3 (1) pp. 73-77
2018 Micro electro discharge machining of nonconductive ceramic. International Journal of Engineering Materials and Manufacture, 3 (1) pp. 55-62
2018 Micro electro discharge machining of nonconductive ceramic: the issue of spalling. International Journal of Engineering and Technology, 7 (3) pp. 32-39
2018 Optimization of gaseous nitriding process parameters for hard surface layer of duplex stainless steel. International Journal of Materials Engineering Innovation, () pp.
2018 The properties of hydroxyapatite ceramic coatings produced by plasma electrolytic oxidation. Ceramics International, 44 (2) pp. 1802-1811
2018 Tribological properties of surface coated duplex stainless steel containing SiC ceramic particles. Jurnal Tribologi, 18 () pp. 136-148
2018 Tribological properties of surface modified Ti-6Al-4V alloy under lubricated condition using Taguchi approach. Jurnal Tribologi, 17 () pp. 15-28
2017 A review of sugar palm (Arenga pinnata): application, fibre characterisation and composites. Multidiscipline Modeling in Materials and Structures, 13 (4) pp. 678-698
2017 Analysis of fracture mechanism for al-Mg/SiCp composite materials. IOP Conference Series: Materials Science and Engineering, 184 () pp. 012031-1
2017 Design and materials development of automotive crash box: a review. Ciência & Tecnologia dos Materiais, 29 (3 (September -December)) pp. 129-144
2017 Electro-discharge machining of alumina: investigation of material removal rate and surface roughness. Journal of Mechanical Engineering and Sciences (JMES), 11 (4) pp. 3015-3026
2017 Experimental investigation on the performance of the TiO2 and ZnO hybrid nanocoolant in ethylene glycol mixture towards AA6061-T6 machining. International Journal of Automotive and Mechanical Engineering, 14 (1) pp. 3913-3926
2017 Influence of nano powder mixed dielectric fluid on surface finish in micro electro discharge machining of zirconia. Current Nanomaterials, 2 (2) pp. 90-94
2017 Nanoindentation and the low velocity impact response of biofibre, biopolymer and its biocomposite derived from sugar palm tree. Current Organic Synthesis, 14 (2 (Thematic Issue)) pp. 227-232
2017 Wear behaviour at 600°C of surface engineered low-alloy steel containing TiC particles. Materials Science and Technology, () pp.
2016 Biodiesel production from crude jatropha oil using a highly active heterogeneous nanocatalyst by optimizing transesterification reaction parameters. Energy & Fuels, 30 (1) pp. 334-343
2016 Effect of oil palm ash on the mechanical and thermal properties of unsaturated polyester composites. e-Polymers, 16 (4) pp. 323-329
2016 Effect of variable particle size reinforcement on mechanical and wear properties of 6061Al–SiCp composite. Composite Interfaces, 23 (6) pp. 533-547
2016 Influence of stirring speed on microstructure and wear morphology of SiCp-6061Al composite. International Journal of Engineering Materials and Manufacture, 1 (1) pp. 21-26
2016 Mechanical properties of oil palm shell composites. International Journal of Polymer Science, 2016 () pp. 1-7
2016 Microstructural aspects of wear behaviour of TiC coated low alloy steel. Materials Science and Technology, 32 (4) pp. 303-307
2016 Preparation and characterisation of TIG-alloyed hybrid composite coatings for high-temperature tribological applications. Transactions of the IMF : The International Journal of Surface Engineering and Coatings, 94 (4 (Special Issue: MITC special issue - Coatings for Tribology)) pp. 211-221
2016 Wear study of Mg-SiCp reinforcement aluminium metal matrix composite. Journal of Mechanical Engineering and Sciences (JMES), 10 (1) pp. 1758-1764
2015 Corrosion of surface modified AISI 4340 steel in jatropha biodiesel. Advanced Materials Research, 1115 () pp. 243-246
2015 Crashworthy capacity of a hybridized epoxy-glass fiber aluminum columnar tube using repeated axial resistive force . Journal of Mechanical Science and Technology, 29 (5) pp. 1941-1953
2015 Crush zone morphology of epoxy–glass fiber–aluminium composite columnar tube due to longitudinal crushing force. Advanced Materials Research, 1115 () pp. 258-261
2015 Effect of electron beam radiation on water absorption of hybrid kenaf-glass unsaturated polyester composite. Advanced Materials Research, 1115 () pp. 266-269
2015 Effect of temperature on the wear properties of alloy steel under jatropha curcas biodiesel . Advanced Materials Research, 1115 () pp. 203-206
2015 Fabrication and characterization of graphene from solid carbon dioxide. Advanced Materials Research, 1115 () pp. 418-421
2015 Fracture behavior issues in HSLA pipeline steels - a review. Advanced Materials Research, 1115 () pp. 207-2012
2015 Investigation of surface roughness in micro-EDM of nonconductive ZrO2 ceramic with powder mixed dielectric fluid. Advanced Materials Research, 1115 () pp. 16-19
2015 Melting of multipass surface tracks in steel incorporating titanium carbide powders. Materials Science and Technology, 31 (11) pp. 1362-1369
2015 Modelling of mechanical properties of eco-friendly composites derived from sugar palm tree. Advances in Environmental Biology, 9 (19) pp. 176-181
2015 Morphological structures of rattan waste binderless particleboard: effect of acid treatment. MicroSOM (Buletin of the Microscopy Society Malaysia, MSM), 13 (2) pp. 11-13
2015 Morphology of cnt-al nanocomposite under different ball milling parameters. Advanced Materials Research, 1115 () pp. 398-401
2015 Optimization of hardness behaviour of TIG modified ceramic coating using the taguchi approach . Advanced Materials Research, 1115 () pp. 238-242
2015 Performance properties of hybrid aluminium–composite columnar tube under axial crush force. Advanced Materials Research, 1115 () pp. 288-291
2015 Surface features of TIG melting coated CP-titanium. Advanced Materials Research, 1115 () pp. 234-237
2015 Synthesis and characterization of Ni–P coated hexagonal boron nitride by electroless nickel deposition. Surface Engineering and Applied Electrochemistry, 51 (6) pp. 523-529
2015 Synthesis of co-deposited hexagonal boron nitride for thermally-efficient tribological performance. Advanced Materials Research, 1115 () pp. 166-169
2015 Thin surface layers of iron-based alloys deposited by TIG hardfacing . Tribology Online, 10 (6) pp. 434-440
2015 TIG melted surface modified titanium alloy for cylinder liner application. International Journal of Automotive Engineering and Technologies, 4 (3) pp. 130-138
2015 Wear characteristics of multiple particle size silicon carbide reinforced aluminium composite. Advanced Materials Research, 1115 () pp. 174-177
2014 Biodegradability and mechanical behaviour of sugar palm starch based biopolymer. American Journal of Applied Sciences, 11 (1) pp. 1836-1840
2014 Degradation characteristics of SPF/SPS biocomposites . Fibres & Textiles in Eastern Europe, 22 (5(107)) pp. 94-96
2014 Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications. Composites: Part B: Engineering, 56 () pp. 68-73
2014 Effect of copper on tensile strength improvement of Al-Cu-SiCp new composite . Materials Science Forum, 773-77 () pp. 541-546
2014 Effect of Micro-EDM Parameters on Material Removal Rate of Nonconductive ZrO2 Ceramic. Applied Mechanics and Materials, 465 () pp. 1329-1333
2014 Micro-edm for micro-channel fabrication on nonconductive ZrO2 ceramic. International Journal of Automotive and Mechanical Engineering (IJAME), 10 (1) pp. 1841-1851
2014 Performance assessment of aluminium composite material for automotive brake rotor . International Journal of Vehicle Systems Modelling and Testing, 9 (3/4) pp. 207-217
2014 Physico-chemical and thermal properties of starch derived from sugar palm tree (arenga pinnata). Asian Journal of Chemistry, 26 (4) pp. 955-959
2014 Tribocorrosion behaviour of biodiesel. Tribology Online, 9 (1) pp. 10-20
2014 Tungsten inert gas surface alloying of commercial purity titanium (CP-Ti) with Fe-C-Si ternary mixtures. Advanced Materials Research, 1024 () pp. 207-210
2013 Characterization of carbon nanotube aluminium nano composite- effect of ball milling time on particle size. International Journal of Academic Research. Part A. Applied and Natural Sciences, 5 (2) pp. 91-93
2013 Development And Characterization Of Coir Fibre Reinforced Composite Brake Friction Materials . The Arabian journal for science and engineering , 38 (11) pp. 3191-3199
2013 Effect of ball milling parameters on the synthesization of carbon nanotube aluminium nano composite. Advanced Materials Research, 626 () pp. 537-541
2013 Flexural and impact properties of biopolymer derived from sugar palm tree. Advanced Materials Research, 701 () pp. 225-228
2013 Investigation of material removal characteristics in EDM of nonconductive ZrO2 ceramic . Procedia Engineering, 56 () pp. 696-701
2013 Investigation of surface roughness in micro-electro discharge machining of nonconductive ZrO2 for MEMS application. IOP Conference Series: Materials Science and Engineering, 53 (2013) pp. 1-5
2013 Materials and processing route for aircraft brake system. International Journal of Mechanical and Materials Engineering (IJMME), 8 (1) pp. 14-20
2013 Mechanical and thermal properties of environmentally friendly composites derived from sugar palm tree. Materials and Design, 49 () pp. 285-289
2013 Processing of TiC-CNT hybrid composite coating on low alloy steel using TIG Torch technique. Applied Mechanics and Materials, 378 () pp. 259-264
2013 Synergistic effect on flexural properties of kenaf-glass hybrid composite. Advanced Materials Research, 626 () pp. 989-992
2013 The tribological behaviour of Fe-C-Al cast iron – effect of temperature. Industrial Lubrication and Tribology, 65 (5) pp. 320-327
2013 Thermo-mechanical behaviours of thermoplastic starch derived from sugar palm tree (Arenga Pinnata). Carbohydrate Polymers, 92 (2) pp. 1711-1716
2013 Wear mechanisms map of CNT-Al nano-composite. Procedia Engineering, 68 () pp. 736-742
2012 A new approach to use Arenga pinnata as sustainable biopolymer: effects of plasticizers on physical properties. Procedia Chemistry, 4 () pp. 254-259
2012 Aluminium-copper-SiCp composite materials corrosion in biodiesel . Advanced Materials Research, 576 () pp. 425-428
2012 Aluminum-silicon carbide composites for enhanced physio- mechanical properties. Advanced Materials Research, 576 () pp. 370-373
2012 Carbon nano tube reinforced aluminium matrix nano-composite: a critical review. Australian Journal of Basic and Applied Sciences, 6 (12) pp. 69-75
2012 Digital logic and knowledge-based system for the automotive piston material selection. International Journal Materials and Structural Integrity, 6 (2/3/4) pp. 134-150
2012 Effect of voltage on the consolidation of TiC particulates on steel substrate fused by TIG welding ARC. International Journal of Mechanical and Materials Engineering (IJMME), 7 (1) pp. 48-53
2012 Effect of voltage on the consolidation of TiC particulates on steel substrate fused by TIG welding arc. International Journal of Mechanical and Materials Engineering (IJMME), 7 (1) pp. 48-53
2012 Effect of water absorption on mechanical properties of sugar palm fibre reinforced sugar palm starch (spf/sps) biocomposites. Journal of Biobased Materials and Bioenergy, 6 (6) pp. 1-5
2012 Energy and cost analysis of weight reduction using composite brake rotor. International Journal of Vehicle Structures & Systems, 4 (2) pp. 69-73
2012 Flexural and impact properties of kenaf-glass hybrid composite. Advanced Materials Research, 576 () pp. 471-474
2012 Heat transfer analysis inside exhaust port for a hydrogen fueled port injection engine. Advanced Science Letters, 14 (1) pp. 239-243(5)
2012 New natural fibre reinforced aluminium composite for automotive brake pad. International Journal of Mechanical and Materials Engineering (IJMME), 7 (2) pp. 166-170
2012 Physio-mechanical properties of aluminium metal matrix composites reinforced with Al2O3 and SiC. International Journal of Engineering and Applied Sciences, 6 () pp. 288-291
2012 Sugar palm tree: a versatile plant and novel source for biofibres, biomatrices, and biocomposites. Polymers from Renewable Resources, 3 (2) pp. 61-77
2012 The crystallinity and hardness properties of Al-Cu/SiCp new composite materials. Advanced Materials Research, 576 () pp. 450-453
2012 Tool wear analysis in end milling of advanced ceramics with TiAlN and TiN coated carbide inserts. Advanced Materials Research, 576 () pp. 76-79
2011 Aluminium metal matrix composite: improving wear performance through treatment. Advanced Materials Research, 264-65 () pp. 278-283
2011 Artificial intelligence model to predict surface roughness of Ti-15-3 alloy in EDM process. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 5 (2) pp. 503-507
2011 Artificial intelligence model to predict surface roughness of Ti-15-3 alloy in EDM process. World Academy of Science, Engineering and Technology, 74 () pp. 198-202
2011 Conceptual design of aluminium metal matrix composite brake rotor system. Advanced Materials Research, 264 () pp. 1648-1653
2011 Current research trends on dry, near-dry and powder mixed electrical discharge machining. Advanced Materials Research, 264 () pp. 956-961
2011 Effect of micro-EDM parameters on material removal rate of nonconductive ZrO2 ceramic. Applied Mechanics and Materials, 465-66 () pp. 1329-1333
2011 Material properties and design aspects of folding bicycle frame. Advanced Materials Research, 264- () pp. 777-782
2011 Metal matrix composite brake rotor: Historical development and product life cycle analysis. International Journal of Automotive and Mechanical Engineering (IJAME), 4 () pp. 471-480
2011 Modeling, analysis and fatigue life prediction of lower suspension arm. Advanced Materials Research, 264 () pp. 1557-1562
2011 Modelling aspect of corrosive wear under biodiesel. Engineering e-Transaction, 6 (2) pp. 161-168
2011 Pattern recognition method to predict recycling strategy for electronic equipments. Advanced Materials Research, 264- () pp. 949-955
2011 Prediction of recycle method using relevance vector machine. Advanced Materials Research , 264 () pp. 943-948
2011 Prediction of surface roughness of Ti-6Al-4V in electrical discharge machining: A regression model . Journal of Mechanical Engineering and Sciences (JMES), 1 () pp. 16-24
2011 Prediction of surface roughness of ti-6al-4v in electrical discharge machining: a regression model. Journal of Mechanical Engineering and Sciences (JMES), 1 () pp. 16-24
2011 Reverse engineering of motorcycle chain. Advanced Materials Research, 264-26 () pp. 1678-1683
2011 Surface temperature distribution in a composite brake rotor. International Journal of Mechanical and Materials Engineering (IJMME), 6 (3) pp. 356-361
2010 Development of a new route for Fe-C-Al cast iron production. Journal of Applied Sciences, 10 (12) pp. 1196-1199
2010 Heat transfer characteristics of intake port spark ignition engine: a comparative study . Journal of Applied Sciences, 10 (18) pp. 2019-2026
2010 In-cylinder heat transfer characteristics of hydrogen fueled engine: a steady state approach. American Journal of Environmental Sciences, 6 (2) pp. 124-129
2010 Materials selection of a bicycle frame using cost per unit property and digital logic methods. International Journal of Mechanical and Materials Engineering, 5 (1) pp. 95-100
2010 Prediction of heat flow through sand mould and its verification on the structure and property of gray cast iron. International Journal of Mechanical and Materials Engineering (IJMME), 5 (2) pp. 208-213
2010 Transient in-cylinder gas flow characteristics of single cylinder port injection hydrogen fueled engine. American Journal of Applied Sciences , 7 (10) pp. 1364-1371
2010 Transient in-cylinder gas flow characteristics of single cylinder port injection hydrogen fueled engine. American Journal of Applied Sciences , 7 (10) pp. 1364-1371
2009 Assessment of surface treatment on fatigue life of cylinder block for linear engine using frequency response approach. American Journal of Applied Sciences , 6 (4) pp. 715-725
2009 Assessment on surface treatment on fatigue life of cylinder block for linear engine using frequency response approach. American Journal of Applied Sciences , 6 (4) pp. 715-725
2009 Wear behavior of as-cast and heat treated triple particle size SiC reinforced aluminium metal matrix composites. Industrial Lubrication and Tribology, 61 (2) pp. 78-83
2008 Finite element based fatigue life prediction of cylinder head for two-stroke linear engine using stress-life approach. Journal of Applied Sciences, 8 (19) pp. 3316-3327
2008 Moisture absorption behaviour of sugar palm fiber reinforced epoxy composites. Materials and Design, 29 () pp. 1666-1670
2008 The effect of environmental treatments on fiber surface properties and tensile strength of sugar palm fiber-reinforced epoxy composites. Polymer - Plastics Technology and Engineering, 47 (6) pp. 606-612
2008 Tribological behavior of dual and triple particle size SiC reinforced Al0MMCs: a comparative study. Industrial Lubrication and Tribology, 60 (4) pp. 189-194
2007 Experimental investigation on system performance using palm oil as hydraulic fluid. Industrial Lubrication and Tribology, 59 (5) pp. 200-208
2007 Mechanical properties study of pseudo-stem banana fiber reinforced epoxy composite. The Arabian journal for science and engineering , 32 (2B) pp. 359-364
2005 A note on the conceptual design of polymeric composite automotive bumper system. Journal of Materials Processing Technology, 159 () pp. 145-151
2005 Design and fabrication of natural woven fabric reinforced epoxy composite for household telephone stand. Materials and Design, 26 (1) pp. 65-71
2005 Study on impact properties of arenga pinnata fibre reinforced epoxy composites. Jurnal Teknologi Terpakai, 3 (1) pp. 14-19
2005 Total design of polymer composite automotive bumper fascia. Suranaree Journal of Science and Technology , 12 (12) pp. 39-45
2004 The effect of intercritical heat treatment on the mechanical properties of AISI 3115 steel. Journal of Materials Processing Technology, 153-15 (10) pp. 482-487
2003 Mechanical properties of epoxy/coconut shell filler particle composites. Arabian Journal for Science and Engineering, 28 (2B) pp. 171-181
2003 Vegetable-based biodegradable lubricating oil additives . Industrial Lubrication and Tribology, 55 (3) pp. 137-143
2002 Wear surface characteristics study of tribo-materials under palm oil methyl ester added lubricant. Industrial Lubrication and Tribology, 54 (4) pp. 177-182
2001 Elastohydrodynamic lubrication study of hard rolling contact using boundary element method. Industrial Lubrication and Tribology, 53 (4) pp. 148-154
2001 Performance, emissions and wear characteristics of an indirect injection diesel engine using coconut oil blended fuel. Journal of Automobile Engineering, 215 (3) pp. 393-404
2001 The applicability of ISO household refrigerator-freezer energy test specifications in Malaysia. Energy, 26 (7) pp. 723-737
2000 Effect of mechanical factors on tribological properties of palm oil methyl blended lubricant. Wear, 239 () pp. 117-125
1999 Palm oil and mineral oil based lubricants - their tribological and emission performance. Tribology International, 32 (6) pp. 305-314
1998 Bio-fuel-contaminated lubricant and hardening effects on the friction and wear of AISI 1045 steel. Tribology Transaction, 41 (1) pp. 155-159
1998 Effect of process variables on structure and properties of aluminium–silicon piston alloy. Journal of Materials Processing Technology, 77 (1-3) pp. 122-128
1997 Investigation of the anti-wear characteristics of palm oil methyl ester using a four-ball tribometer test . Wear, 206 (1-2) pp. 179-186
1996 The effect of palm oil diesel fuel contaminated lubricant on sliding wear of cast irons against mild steel. Wear, 198 (1-2) pp. 293-299
1996 Wear, performance and emissions of a two-stroke engine running on palm oil methyl ester blended lubricant. Journal of Engineering Tribology, 210 (4) pp. 213-219
Conference or Workshop Item

2023 Comparative study on performance characteristics of modified alloy steels by TIG and water jet peening processes. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia,
2023 Effect of pore forming agent on phase transformation behavior of porous NiTi shape memory alloy. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia,
2023 Hybrid coating of titanium alloys via liquid additive manufacturing method: a review of recent advances. In: 6th International Conference on Mechanical, Automotive and Aerospace Engineering 2023 (ICMAAE '23),
2023 Sustainable eSiC reinforced composite materials – synthetization and characterization. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021),
2023 Synthesis and characterization of Ta/TaN coatings with CFUBMS-HiPIMS technology. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia,
2023 Wear and corrosion of ceramic coated metallic surface in presence of biodiesel. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia,
2022 Demographic changes by the vickers microhardness surface indentations on the TiC metal matrix composite TIG melted track. In: 3rd Malaysian International Tribology Conference,
2022 Effect of two-step austempering heat treatment on the dry sliding wear behavior of austempered ductile cast iron. In: 37th Annual Conference and Annual General Meetings,
2022 Flat plate and evacuated tube collectors solar water heater system – a comparative study. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), Kuala Lumpur, Malaysia,,
2022 Flat plate and evacuated tube collectors solar water heater system – a comparative study. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), Kuala Lumpur, Malaysia,,
2022 Literature survey on manufacturing alumina/aluminum MMC by stir casting and their wear behaviors with and without solid lubrication. In: 3rd Malaysian International Tribology Conference,
2022 Recent advances in hybrid coating on metallic materials using liquid additive manufacturing. In: International Conference on Mechanical Engineering (ICME 2022),
2022 Simulation of wear map for biodiesel interacted automotive materials. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021),
2022 Synthetization of TiC surface hardening using TIG melting technique - the effect of working distance. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2021),
2022 Wear and corrosion behavior of metallic coated surface under exposure to biodiesel�. In: ICAMME2022,
2021 Comparative study on performance of flat plate and evacuated tube collectors solar water heater system. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21), Kuala Lumpur, Malaysia,,
2021 High impact journal writing and publication. In: Workshop on High Impact Journal Writing and Publication,
2021 Natural and industrial origin reinforced LM6 aluminum composite materials – A comparative study. In: Recent Innovations in Science & Technology (RIST 2021),
2021 Natural and industrial origin reinforced LM6 aluminum matrix composite materials – a comparative study. In: International Conference on Recent Innovations in Science and Technology (RIST 2021),
2021 Sustainable energy simulation for water heating system. In: 2021 Sustainable Engineering and Industrial Technology Conference,
2021 Sustainable eSiC reinforced composite materials – synthetization and characterization. In: 8th Brunei International Conference on Engineering and Technology 2021 (BICET2021),
2021 The effect of working distances on the formation of TiC composite surface hardening using TIG melting technique. In: 5th International Conference on Mechanical, Automotive and Aerospace Engineering 2021 (ICMAAE'21),
2020 A systematic literature review. In: Webinar on Sytematic Literature Review,
2020 Effect of TiO2 and Al2O3-ethylene glycol-based nanofluids on cutting temperature and surface roughness during turning process of AISI 1018. In: "Energy Security and Chemical Engineering Congress 2019, ESChE 2019",
2020 Evaluation of sustainable micro-alloyed HSLA steel for pipeline application. In: International Gas Research Conference 2020 (IGRC 2020),
2020 Experimental study on dynamic viscosity of aqueous-based nanofluids with an addition of ethylene glycol. In: 5th International Conference on Mechanical Engineering Research 2019 (ICMER 2019),
2019 A new approach for composite coating development on duplex stainless steel (DSS). In: Kulliyyah Of Engineering Research, Innovation And Commercialisation Exhibition (KERICE) 2019,
2019 Effect of SiC particle size on hardness and wear behavior of TIG melted hard surface layer AISI Duplex-2205 Steel. In: 4th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME) 2019,
2019 Sustainable lightweight composite materials. In: Tech Plan Demo Day in Malaysia 2019,
2018 A new approach for composite coating development on metallic materials. In: Malaysia Technology Expo 2018,
2018 An investigation of TIG welding parameters on microhardness and microstructure of heat affected zone of HSLA steel. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017),
2018 Eco-SiC reinforced aluminium matrix composite for motorbike brake disc application. In: Malaysia Technology Expo 2018,
2018 Lighter weight and energy efficient eco-siC composite for motorbike brake disc application. In: 29th INTERNATIONAL INVENTION, INNOVATION AND TECHNOLOGY EXHIBITION (ITEX) 2018,
2018 Melting of SiC powders preplaced duplex stainless steel using TIG welding. In: ICAMME 2017: International Conference on Advances in Manufacturing and Materials Engineering 2017,
2018 Micro electro discharge machining of non-conductive ceramic. In: 8th International Conference on Manufacturing Science and Technology (ICMST 2017),
2018 Nitride alloy layer formation of duplex stainless steel using nitriding process. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017),
2018 TIG torch technique for hard face surfacing. In: TNBR Remaco presentation,
2018 Wear properties of SiC particulate preplaced TIG melted surface layered duplex stainless steel. In: World Summit on Advances in Science, Engineering and Technology (Cambridge Summit 2018),
2017 Abrasive wear response of TIG-melted TiC composite coating: Taguchi approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16),
2017 Eco-friendly automotive disc brake and cylinder liner (Eco SiC). In: IIUM World Prosumer Convention 2017,
2017 Effect of energy input on wear behaviour of SiC surface modified layer duplex stainless steel. In: 5th Malaysia-Japan Tribology Symposium (MJTS2017),
2017 Effect of process parameters on microhardness and microstructure of heat affected zone in TIG welded X65-HSLA steel. In: International Conference on Advances in Manufacturing & Materials Engineering (ICAMME) 2017,
2017 Fe-C-Si ternary composite coating on CP-titanium and its tribological properties. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16),
2017 Hardfacing of duplex stainless steel using melting and diffusion processes. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16),
2017 Influence of Ti addition on fracture behaviour of HSLA steel using TIG melting technique. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16),
2017 Materials processing technology with Islamic perspective. In: KOE Islamization Seminar,
2017 Modified surface of duplex stainless steel using tig torch and diffusion techniques. In: Malaysia Technology Expo (MTE 2017),
2017 Modified surface of duplex stainless steel using TIG torch melting and diffusion techniques. In: Malaysia Technology Expo (MTE 2017),
2017 Noble hybrid composite coated low alloy steel for high temperature applications. In: Malaysia Technology Expo (MTE 2017),
2017 Optimization of tribological performance of SiC embedded composite coating via Taguchi analysis approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16),
2017 Overview of Malaysian standards on alloy steels. In: Seminar on MS The Implementation of Malaysian Standards For Alloy Steels,,
2017 Particulate composite surface by TIG torch surfacing. In: Advanced Materials Characterization Technique (AMCT 2017),
2017 Particulate preplaced TIG melted surface layer of duplex stainless steel. In: International Conference on Advances in Manufacturing & Materials Engineering (ICAMME) 2017,
2017 Physical properties of heat-treated rattan waste binderless particleboard. In: 3rd International Conference of Global Network for Innovative Technology 2016: Advanced Materials for Innovative Technologies, IGNITE 2016,
2017 Surface modification of duplex stainless steel with SiC preplacement using TIG torch cladding. In: Advances in Material & Processing Technologies Conference,
2017 TIG torch surfacing of nano-particulate hybrid composite layer: development and characterization. In: 1st International Workshop on Multifunctional Materials (IW2M-2017),
2017 Wear behaviour of surface alloyed duplex stainless steel containing SiC ceramic particles. In: The 5th International Conference and Exhibition On Energy and Advanced Materials (ICE-SEAM2017),
2017 Writing a high impact research paper. In: Seminar/Talk at Faculty of Science & Technology, University of Mostaganem Algeria,
2016 Characterization of ball-milled carbon nanotube dispersed aluminum mixed powders. In: 3rd International Conference on Competitive Materials and Technology Processes (IC-CMTP3),
2016 Dry sliding wear characterization of TIG embedded composite coatings using Taguchi based grey relational analysis approach. In: 4th Malaysia-Japan Tribology Symposium 2016 (MJTS 2016),
2016 Effect of stir casting process parameters on tribological performance of Al6061-SiCp composite. In: 4th Malaysia-Japan Tribology Symposium 2016 (MJTS 2016),
2016 Formation of Fe-C-Si ternary composite coating on CP-titanium and its tribological interaction with Jatropha oil. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16),
2016 Fracture surface behaviour of Al-Mg-SiCp composite materials. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16),
2016 Fungi growth on rattan board exposed to natural weathering. In: 4th International Conference on Biotechnology Engineering 2016 (ICBioE 2016),
2016 Hard surface layer formation on duplex stainless steel using melting and diffusion processes: a review. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE '16),
2016 Investigation of parametric influence on the properties of Al6061-SiCp composite. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE’16),
2016 Lubricated wear behaviour of SiC reinforcement on TI-6AL-4V alloy based on Taguchi approach. In: 4th Malaysia-Japan Tribology Symposium 2016,
2016 Surface modification of duplex stainless steel with SiC preplacement using TIG torch cladding. In: Advances in Materials and Processing Technologies, 2016 (AMPT 2016),
2016 Surface modification of HSLA steel and its fracture behavior. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2016),
2016 Wear behaviour optimization of TIG parameters on wear behavior of sic embedded coatings using Taguchi approach. In: 3rd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2016),
2015 Composite brake rotor: energy savings and wear performance. In: IRIIE 2015,
2015 Development of activated hexagonal boron nitride for tribo-composite coatings using electroless nickel plating technique. In: 3rd International Doctoral Student Symposium with Partner Universities,
2015 Hardsurface layer of TiC embedded alloy steel by TIG torch technique. In: The 2015 ICBTS International Academic Research Conference in Europe & America,
2015 Influence of single and multiple particle size variation on mechanical and wear behaviour of aluminium silicon carbide composites. In: Malaysian International Tribology Conference 2015,
2015 Novel activated Ni-P-hBN composite powder for efficient solid lubricant coating application. In: PECIPTA2015,
2015 Preparation and characterization of TIG-alloyed hybrid composite coatings for high-temperature tribological applications. In: Malaysian International Tribology Conference 2015,
2015 Wear behaviour of TiC coated AISI 4340 steel produced by TIG surface melting. In: International Conference on Functional Materials and Metallurgy, ICoFM 2014,
2014 Contemporary light weight composite material -milestone towards automotive brake rotor application. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014),
2014 Engineered hexagonal boron nitride utilizing environmental friendly co-deposition technique . In: International Research, Invention and Innovation Exhibition 2014 (IRIIE2014),
2014 Noble electroless Ni-P deposited hexagonal boron nitride for effective solid lubricant application. In: Malaysia Technology Expo 2014,
2014 Performance of hybrid aluminium–composite columnar tube under axial crush force . In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014),
2014 TIG melted surface modified titanium alloy for automotive cylinder liner application. In: International Conference on Advanced Technology & Sciences (ICAT’14),
2014 Wear and corrosion of composite coated AISI 4340 steel exposed to jatropha curcas biodiesel. In: 3rd International Conference on Mathematical Applications in Engineering (ICMAE'14),
2013 Development of kenaf hybrid composite for structural applications. In: IRIIE 2013,
2013 Energy saving and performance stability of silicon carbide reinforced aluminium composite automotive brake rotor. In: 24th International Invention, Innovation and Technology Exhibition (ITEX 2013),
2013 Energy saving composite automotive brake rotor prototype . In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2013,
2013 High performance aluminium composite brake rotor. In: International Conference And Exposition On Invention Of Institutions Of Higher Learning (PECIPTA 2013),
2013 Modelling of material removal rate in EDM of nonconductive ZrO2 ceramic by Taguchi method. In: International Conference on Advances in Mechanical Engineering 2013, ICAME 2013,
2013 Physical property of multi walled carbon nanotube reinforced aluminium nano composite . In: IIUM Research, Invention and Innovation Exhibition (IRIIE) 2013,
2012 Physical property of multi walled carbon nanotube reinforced aluminium nano composite . In: World Research & Innovation Convention on Engineering & Technology (WRICET2012),
2012 A novel approach for the prediction of thermal distribution in automotive brake rotor. In: 5th Engineering Conference (ENCON12),
2012 Biodiesel production from Macro Algae as a green fuel for diesel engine. In: 5th Engineering Conference (ENCON12),
2012 Development of waste coir-reinforced aluminum matrix automotive brake pad material . In: IRIIE2012,
2012 Failure of woven fiber glass epoxy composite under charpy impact loading. In: The 21st Scientific Conference of the Microscopy Society of Malaysia ,
2012 Reverse engineering of automotive piston. In: IRIIE2012,
2011 Effect of voltage on the consolidation of tic particulates on steel substrate fused by TIG welding arc. In: Regional Tribology Conference 2011,
2011 Energy efficient lighter weight aluminium matrix composite automotive brake motor. In: International Conference On Harnessing Technology (ICHT) 2011, ,
2011 Investigation of tribological issues in microforming: a review. In: Regional Tribology Conference,
2011 Medelling aspect of corrosive wear under biodiesel. In: Regional Tribology Conference,
2011 New natural fibre reinforced composite brake friction material. In: Regional Tribology Conference 2011,
2011 Surface temperature distribution in a composite brake rotor. In: Regional Tribology Conference 2011,
2011 Tribological study of A1 based natural fibre reinforced composite brake pad materials. In: Regional Tribology Conference 2011,
2011 Wear properties of Fe-C-Al cast iron and conventional cast iron - a comparative study. In: Regional Tribology Conference 2011,
2010 An overview of advanced material characterization techniques. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010),
2010 Design and development of mild steel die for production of hip-bone joint. In: International Chemical and Environmental Engineering Conference 2010,
2010 Development of material selection method for the application children bicycle frame. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010),
2010 Effect of multiple-particle size reinforced silicon carbide(SICP) on properties of aluminium matrix composite. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010),
2010 Effect of Process Parameters on Abrasive Contamination During Water Abrasive Jet Machining of Mild Steel. In: ,
2010 Fabrication of biodegradable composite – an implication of plasticizer. In: National Conference in Mechanical Engineering for Research and Postgraduate Studies 2010 (NCMER 2010),
2010 Fabrication of Silicon Nanopillar Sheet for Cell Culture Dish. In: ,
2010 Knowledge based expert system application for automative piston material selection. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010),
2010 Material selection method in design of automotive brake disc . In: World Congress on Engineering 2010 ,
2010 Materials for bicycle frame system - a case study on the development of selection method. In: The third international conference on structure, processing and properties of materials,
2010 Mold preparation for stir casting of aluminium matrix composite brake motor: a review. In: World Engineering Congress 2010,
2010 Reverse engineering of children bicycle. In: IIUM Research, Innovation & Invention Exhibition (IRIIE 2010),
2010 The development of an optimum material selection process for the design of automative brake rotor. In: 2010 International Conference on Process Engineering and Advanced Materials (icpeam2010),
Book

2023 Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering. Springer Nature, ISBN: 978-981-19-9508-8
2023 Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering. Springer, ISBN: 978-981-19-9508-8
2018 International Journal of Current Research in Science & Technology. UR Publishers, ISBN: 2581-4311 (ISSN)
2013 Materials selection and design. Springer, ISBN: 97898-4560-37-5
2012 Advances in manufacturing and materials engineering. Trans Tech Publications Ltd., , ISBN: 978-3-03785-498-3
2011 Advances in composite materials. IIUM Press, ISBN: 9789674182311
2011 Advances in materials engineering Vol. 1. IIUM Press, ISBN: 9789674181673
2011 Advances in materials engineering Vol. 2. IIUM Press, ISBN: 9789674181680
2011 Contemporary metallic materials. IIUM Press, ISBN: 9789674181642
2010 Materials Processing and Precision Engineering: series 1. Department of manufacturing and Materials,Kulliyyah of Engineering, IIUM, ISBN:
Book Section

2023 Engine tribology enhancing energy efficiency for cleaner environment. In: CRC Press, Tailor & Francies Group LLC, ISBN: 9781032038575, pp. 221-254
2023 Engine tribology: enhancing energy efficiency for cleaner environment. In: CRC Press, ISBN: , pp. 221-254
2022 Properties of recycled metal matrix composites. In: CRC Press, Tailor and Francis Group, ISBN: 978-0-367-70974-7, pp. 93-107
2020 Heat affected zone morphology of TIG torch welded HSLA steel in presence of Ti and V microalloying elements. In: Elsevier, ISBN: 978-0-12-813196-1, pp. 439-444
2020 Heat affected zone morphology of TIG torch welded HSLA steel in presence of Ti and V microalloying elements. In: Elsevier, ISBN: 978-0-12-813196-1, pp. 439-444
2020 Heat affected zone morphology of TIG torch welded HSLA steel in presence of Ti and V microalloying elements. In: Elsevier, ISBN: 780128131954, pp. 439-444
2020 Interface study of SiCp/6061Al composite. In: Elsevier Inc., ISBN: 978-0-12-813196-1, pp. 456-461
2020 Particulate composite protective coating using conventional melting approach. In: Elsevier, ISBN: 9780128035818, pp. 510-516
2020 Processing of ceramic composite coating via TIG torch welding technique. In: Elsevier Inc., ISBN: 978-0-12-813196-1, pp. 523-535
2020 Residual stress analysis for sustainable structural integrity assessment of an engineering component. In: Elsevier Inc., ISBN: 978-0-12-813196-1, pp. 548-556
2020 TIG Torch melting as surface engineering technology. In: Elsevier, ISBN: 978-0-12-813196-1, pp. 629-637
2020 TIG Torch melting as surface engineering technology. In: Elsevier, ISBN: 978-0-12-813196-1, pp. 629-637
2019 Performance of thermoplastic sugar palm starch biopolymers. In: CRC Press, ISBN: 978-1-4987-5302-9, pp. 57-70
2019 Removal of chromium with CNT coated activated carbon for waste water treatment. In: Elsevier 2020, ISBN: 9780128131954, pp. 1-11
2019 Review of development and characterization of sugar palm fiber–reinforced polymer composites. In: CRC Press, ISBN: 978-1-4987-5302-9, pp. 15-40
2019 Sugar palm starch biopolymer: extraction and processing. In: CRC Press, ISBN: 978-1-4987-5302-9, pp. 41-55
2018 Heat affected zone morphology of TIG torch welded HSLA steel in presence of Ti and V microalloying elements. In: Elsevier, ISBN: , pp. 1-7
2018 Residual stress analysis in sustainable structural integrity assessment of an engineering component. In: Elsevier, ISBN: , pp. 1-9
2018 Wear behavior of aluminium modified cast iron in comparison with conventional gray cast iron. In: Elsevier, ISBN: 978-0-12-803581-8, pp. 1-7
2014 Automotive bottom structure composite materials selection: digital logic and knowledge based system approach. In: Universiti Putra Malaysia Press, ISBN: 9789673443963, pp. 191-210
2011 A critical review of metal matrix composite brake rotor . In: IIUM Press, ISBN: 9789674182311, pp. 1-6
2011 Conceptual design of folding bicycle frame with light weight materials. In: IIUM Press, ISBN: 9789674181642, pp. 81-85
2011 Fabrication of metal matrix composite automotive brake rotor: part 1. In: IIUM Press, ISBN: 9789674182311, pp. 80-85
2011 Fabrication of metal matrix composite automotive brake rotor: part 2 . In: IIUM Press, ISBN: 9789674182311, pp. 86-89
2011 High Density Polyethylene (HDPE) as an alternative material in fuel tank production . In: IIUM Press, ISBN: 9789674181659, pp. 164-171
2011 High Density Polyethylene (HDPE) as an alternative material in fuel tank production. In: IIUM Press, ISBN: 9789674181673, pp. 126-131
2011 Machining of ceramic materials: a review . In: IIUM Press, ISBN: 9789674181628, pp. 38-43
2011 Parametric Optimization in EDM of Ti-6Al-4V using Copper Tungsten Electrode and Positive Polarity: a statistical approach. In: WSEAS Press, ISBN: ISBN: 978-960-474-300-1, ISSN: 1762-6882, pp. 107-113
2011 Parametric Optimization in EDM of Ti-6Al-4V using Copper Tungsten Electrode and Positive Polarity: a statistical approach. In: WSEAS Press, ISBN: ISBN: 978-960-474-300-1, ISSN: 1762-6882, pp. 107-113
2011 Reverse engineering for automotive fuel tank. In: IIUM Press, ISBN: 9789674181642, pp. 121-126
2011 Reverse engineering of automotive piston. In: IIUM Press, ISBN: 9789674181642, pp. 86-91
2011 Technology of moulding for composite auto brake rotor. In: IIUM Press, ISBN: 9789674182311, pp. 7-12
2011 The tribological behaviour of Al-Si automotive piston material. In: IIUM Press, ISBN: 9789674181642, pp. 75-80
2011 Thermal profile analysis of composite brake rotor. In: IIUM Press, ISBN: 9789674181673, pp. 165-171
2011 Wear of aluminium matrix composite – effects of reinforcement combination. In: IIUM Press, ISBN: 9789674182311, pp. 90-95
2010 Investigation of Microholes Produced by Focused Ion Beam Micromachining. In: Department of Manufacturing and Materials,Kulliyyah of Engineering, IIUM, ISBN: , pp. 92-97
Monograph

2023 Stainless steels for general purposes – Part 2: Corrosion-resistant semi-finished products, bars, rods and sections (First revision) (ISO 16143-2:2004, MOD). In: Department of Standard Malaysia (DSM),
2020 Stainless steels for general purposes - Part 1: Corrosion-resistant flat products (ISO 16143-1:2014, MOD) (First revision). In: Department of Standards Malaysia,
2017 Hot rolled alloy steel wire rod for pre-stressed steel - Specification. In: DSM,
2017 Prototype development of light weight aluminium matrix composite automotive brake rotor. In: ,
2016 Alloy steel bars for special application bolting materials. In: ,
2016 Characterization of Tribo-corrosion using jatropha curcas linnaeas biodiesel for automotive engine component materials. In: ,
2016 Erosion corrosion and tribological behavior of TIG torch composite layers. In: Research Management Centre, International Islamic University Malaysia,
2012 Characterization of ceramic materials after machining by EDM. In: s.n,