Staff Directory
Academic Qualification
- Engineering - Doctor of Philosophy, International Islamic University Malaysia
- Electronics Engineering - Masters Degree, International Islamic University Malaysia
Aliza 'Aini Binti Md Ralib @ Md Raghib (Assoc. Prof. Dr.)
Associate Professor
IIUM Gombak Campus
KULLIYYAH OF ENGINEERING
alizaaini@iium.edu.my
5462
Area of Specialisation
- Engineering Tech ~ Engineering And Technology ~ Electrical and Electronic Engineering ~ Other Electrical and Electronic Engineering n.e.c.
- Engineering Tech ~ Engineering And Technology ~ Electrical and Electronic Engineering ~ Microelectronics
Professional Membership
- 2017 - 2024: Member of Profesional Body / Association: (Senior member), Institute of Electrical and Electronics Engineers (IEEE)
- 2017: Member of Profesional Body / Association: (Member), Persatuan Saintis Muslim Malaysia
- 2018: Member of Profesional Body / Association: (Member ), Instituition of Engineers Malaysia (IEM)
Teaching Responsibilities
ELECTRIC CIRCUITS | 2016/2017 |
ELECTRICAL ENGINEERING LAB | 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 |
ELECTRICAL ENGINEERING LAB 1 | 2024/2025 2023/2024 2022/2023 2021/2022 |
ELECTRONICS | 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016 |
ENGINEERING LAB I | 2015/2016 |
ENGINEERING LAB II | 2018/2019 |
FINAL YEAR PROJECT 1 | 2024/2025 2023/2024 2019/2020 |
FINAL YEAR PROJECT 2 | 2024/2025 |
FINAL YEAR PROJECT I | 2024/2025 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 |
FINAL YEAR PROJECT II | 2023/2024 2022/2023 2021/2022 2018/2019 |
FUNDAMENTALS OF ELECTRICAL AND ELECTRONIC | 2024/2025 2023/2024 2022/2023 2021/2022 |
MICROELECTROMECHANICAL (MEM) SENSORS, ACTUATORS AND SYSTEMS | 2023/2024 2022/2023 2021/2022 2019/2020 2018/2019 |
MICROELECTROMECHANICAL SENSOR, ACTUATORS AND SYSTEMS | 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 |
SEMINAR | 2017/2018 2016/2017 |
USRAH IN ACTION 1 | 2022/2023 2021/2022 |
USRAH IN ACTION 2 | 2023/2024 2022/2023 |
Supervision
Improving The Performance Of The Qcm Sensor In Detecting Ipa Using Chitosan And Mof-199.
Ph.D
Completed
2024
Main Supervisor
|
Design And Characterization Of Wearable Zinc-Oxide Piezoelectric Nanogenerator On Textile.
Ph.D
In Progress
Co-supervisor
|
Microbial Chitosan Thin Film From Palm Oil Mill Effluent For Potential Piezoelectric Application.
Master
Completed
2023
Co-supervisor
|
Geometric Parameter Optimization Of Screen Printed Electrode (Spe) For Electrochemical-Based Sensing Applications
.
Master
Completed
2021
Co-supervisor
|
Low-Cost And Rapid Prototyping Of Electrochemical Microfluidic Biosensors.
Master
Completed
2021
Co-supervisor
|
Development Of Surface Acoustic Wave Device Based On Quartz.
Master
Completed
2019
Main Supervisor
|
Design And Fabrication Of Microstrip Patch Antenna Using Conformal Substrates.
Master
Completed
2018
Co-supervisor
|
Design And Analysis Of Vibration-Based Piezoelectric Energy Harvester.
Master
In Progress
Main Supervisor
|
Zno Nanorod For Wearable Textile Energy Harvester Application.
Master
In Progress
Main Supervisor
|
Design And Analysis Of Mems Piezoresistive Pressure Sensor.
Master
In Progress
Main Supervisor
|
Eco-Friendly Multi-Walled Carbon-Based Nanotube (Mwcnt)/Chitosan Composite As Conductive Ink For Printed Electronics.
Master
In Progress
Main Supervisor
|
Design Of Potentiostat And Fluidic Chamber For Biosensing Application.
Master
In Progress
Co-supervisor
|
Carbon Nanotubes/ Chitosan Polymer As Functional Material For Volatile Organic Compounds Detection.
Master
In Progress
Co-supervisor
|
Development Of Radiation Hardened Graphene Field Effect Transistor With Passivation Layer Under High Energy Electron.
Master
In Progress
Co-supervisor
|
Development Of A Smart Glove For Hand Gesture Detection.
Master
In Progress
Co-supervisor
|
Research Projects
Completed
2023 - 2024 | Establishing a Baseline for Real-Time Detection of Nitrogen, Phosphorus, and Potassium (NPK) in Sensors for Soil-less Media: Training and Advisory Solution |
2022 - 2022 | IEEE Pre-University STEM Portal Grant: Telecom Engineer at a Glance |
2022 - 2023 | IIUM Flagship 2.0 FG7: SCITECH |
2021 - 2021 | INTRODUCTION TO RASPBERRY PI |
2021 - 2021 | WORKSHOP ON RASPBERRY PI FOR INTERMEDIATE LEVEL |
2021 - 2022 | SCITECH (Acculturation Science and Technology Among Underprivileged Children) |
2020 - 2022 | Enhanced Nicotine Detection Using Electrochemical-based Screen-printed Carbon Electrodes Modified with Graphene-Based Materials |
2019 - 2023 | Empirical Model for Volatile Organic Compound Selectivity Prediction of Polymer-based Acoustic Wave Sensor Array through Machine Learning Algorithm |
2019 - 2019 | Educational Activities Program with "Anak-Anak Orang Asli ASDAF" |
2019 - 2023 | Chitosan-based biocompatible piezoelectric thin film from shrimp shell waste for self-powered cardiac pacemaker |
2018 - 2022 | Identification of Acetone Biomarkers in Exhaled Breath using Novel Properties of Zinc Oxide (ZnO) Nanorods Optical Sensor for Diabetes Detection |
2018 - 2021 | Study on c-axis polarization and piezoelectric properties of K0.5Na0.5NbO3 thin film-ZnO nanowhisker composite via the hybrid sol-gel route. |
2018 - 2022 | Development of Printed Power Sources on Flexible Substrates |
2018 - 2022 | A Novel Mathematical Formulation of Hybrid Piezoelectric and Electromagnetic Dynamics for Micro Energy Harvesting |
2017 - 2020 | Development of Flexible Piezoelectric Energy Harvester for Wearable Devices and Development of Printable, Flexible, Rechargeable Zinc Batteries for Powered Smart Card Application |
2017 - 2020 | Theoretical modeling of lung cancer biomarkers in exhaled breath using silicon compatible electroacoustic microsensors |
2016 - 2019 | Rotating Piezoelectric Energy Harvester of Wearable Devices |
2016 - 2019 | Reduced-reference Metric Video Quality Metric using Spatial Information in Salient Regions |
2016 - 2019 | An Investigation on the Piezoelectric Characteristics of Thin Film for Flexible Surface Acoustic Wave Ultraviolet Microsensor |
On-Going
2024 - Present | Explication of Printing Techniques and Substrate Materials on the Performance of Printed Force Sensing Resistors for Muscle Fatigue Detection |
2024 - Present | Akselerasi Ilmu Sains,Teknologi, Kejuruteraan, Matematik dan Seni Bersama Anak-Anak Orang Asli (SCITECH 9.0) |
2023 - Present | MICROBIT: Fun Challenge with Sustainable Development Goals |
2023 - Present | Bringing STEM To Life |
2023 - Present | Exploring The Impact of Short-term STEM Program and Parental Encouragement on Primary School Children's STEM Interest |
2022 - Present | Exploring STEM Electrochemistry and Sustainability from the Environment Concept for Indigenous Children at ASDAF |
2022 - Present | Let's Imagineering @ STEM Fun Club |
2022 - Present | Radiation Hardened of Graphene Field Effect Transistor (GFET) Model with Nano-composite Passivation Layer under High Energy Electron for Radiation Therapy Applications |
2021 - Present | Design, Modeling and Characterization of Zinc-oxide piezoelectric nanogenerator on textile |
2021 - Present | Hydrophilic study of Carbon Nanotubes-Chitosan hybrid as functional material for Volatile Organic Compounds (VOCs) Detection |
2021 - Present | Stretchable chitosan-foliated graphite biocomposite as piezoresistive functional material towards enhanced strain sensing response |
2021 - Present | Do-Your-Bit Nature Challenge |
2021 - Present | Enhanced Peak Current in Nicotine Detection using Electrochemical-based Screen Printed Electrodes Modified with Chitosan-Reduced Graphene Oxide Nanocomposite |
2021 - Present | STEM For all: Inspiring Malaysia Indigeneous students through EDS-ETC |
2021 - Present | 2021 IEEE Region 10 Educational Activities ?Reaching Local Initiatives? entitled ENRICHING ORPHANS CURIOSITY |
2021 - Present | Fostering Online Learning for Marginalized Children in Malaysia |
2021 - Present | BRINGING DIGITAL INEQUALITIES AMONGST THE URBAN POOR COMMUNITIES IN MALAYSIA |
2021 - Present | 2021 IEEE Region 10 Educational Activities ?Reaching Local Initiatives? entitled Let?s code with Microbit |
2021 - Present | Let's Play Robot with TryEngineering |
2020 - Present | Fabrication of Flexible Piezoelectric Nanogenerator Using Molybdenum Disulfide (MoS2) and Graphene Film Derived from Empty Fruit Bunch (EFB) for Small-Scale Energy Harvesting Applications |
2020 - Present | 2020 IEEE RIO EA New Innovative Challenge - IEEE EDS Malaysia Chapter - Pre-University Program: Bringing STEM to life (STEM for" Learning Disabled Students) |
2020 - Present | Design and Development of Screen Printed Carbon Electrodes (SPCEs) For Nicotine Sensor |
2019 - Present | Microfabrication of Microfluidic Channel that Mimic Blood Vessel in the Hand (IIUM - University of Limoges (France) Joint Collaboration Programme) |
2018 - Present | Interdigitated Electrode Patterning using Standard Photolithography and Wet Etching for Surface Acoustic Wave Sensor Based on ST Cut Quartz for Breath Analysis (IIUM - University of Limoges (France) Joint Collaboration Programme) |
2018 - Present | Development of circuit simulator model for Negative Capacitance Field Effect Transistors for Low Power IoT Devices applications |
2018 - Present | IIUM-UNIVERSITY LIMOGES (FRANCE) JOINT COLLABORATION PROGRAMME |
2018 - Present | IIUM-UNIVERSITY OF LIMOGES(FRANCE) JOINT COLLABORATION PROGRAMME |
2009 - Present | VSLI and MEMS Research Unit |
Publications
Article
Conference or Workshop Item
2023 | Biocompatibility assessment of wearable C/TPU/Tegaderm strain sensors. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE), |
2023 | Characterization and fabrication of piezoelectric energy harvesting ZnO nanorod on textile by hydrothermal method. In: IEEE International Conference on Sensors and Nanotechnology (SENNANO 2023), |
2023 | Chitosan as natural binder for eco-friendly printable conductive ink. In: 2023 IEEE Regional Symposium on Micro and Nanoelectronics (RSM), |
2023 | Enhancement of quality factor in ST-cut quartz surface acoustic wave devices by using different numbers of IDTs and wavelengths for gas sensing. In: 2023 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), |
2023 | Finite element simulation of single Zinc Oxide nanorod for piezoelectric nanogenerator. In: 14th IEEE Regional Symposium on Micro and Nanoelectronics (RSM 2023), |
2023 | Macro-bending effect of single-mode fiber for glucose sensor. In: 9th International Conference on Computer and Communication Engineering (ICCCE 2023), |
2023 | Optimization of multi-channel quartz crystal microbalance for Gas Sensing Application. In: 2023 IEEE 8th International Conference on Recent Advances and Innovations in Engineering (ICRAIE), |
2023 | Pencil graphite on paper: facile approach for fabrication of flexible strain sensors. In: ICSIMA 2023 The 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications 2023, |
2023 | Performance evaluation of Laser-Induced Screen Printed Electrodes for electrochemical detection. In: ICSIMA 2023 The 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications 2023, |
2022 | Study of adsorption isotherms in the detection of acetone and isopropyl alcohol using QCM sensor with chitosan sensing layer. In: 2022 IEEE International Conference on Semiconductor Electronics (ICSE), |
2021 | Graphene-oxide coated on fiber Bragg Grating for temperature sensor. In: 2021 8th International Conference on Computer and Communication Engineering (ICCCE), |
2021 | Microbial chitosan for the fabrication of piezoelectric thin film. In: The 6th International Online Conference on Science, Technology, and Interdisciplinary Research 2020, |
2021 | Performance Analysis of VOCs Detection using Polyisobutylene and Chitosan Overlayed on QCM Sensor. In: 2021 IEEE Regional Symposium on Micro and Nanoelectronics (RSM), |
2021 | Simulation of geometrical parameters of Screen Printed Electrode (SPE) for electrochemical-based sensor. In: IEEE Regional Symposium on Micro and Nanoelectronics (RSM), |
2021 | Study of multichannel QCM prospects in VOC detection. In: 1st International Conference on Fundamental, Applied Sciences and Technology, ICoFAST 2021, |
2020 | Microbial chitosan thin film from palm oil mill effluent for potential application as novel tactile sensor. In: Kulliyyah of Engineering Research, Innovation and Commercialization Exhibition (KERICE) 2020, |
2020 | Relative humidity sensor based on tapered plastic optical fibre with full-and spiral-patterned agarose gel coating. In: 2020 18th IEEE Student Conference on Research and Development (SCOReD), |
2020 | Review on microbial chitosan for the fabrication of piezoelectric thin film. In: The 6th International Online Conference on Science, Technology, and Interdisciplinary Research, |
2019 | Design and simulation of film bulk acoustic wave resonator (FBAR) gas sensor based on ZnO thin film. In: "2019 IEEE Regional Symposium on Micro and Nanoelectronics (RSM)", |
2019 | Gm/ID approach for low power sustaining amplifier circuit for GHz range MEMS SAW oscillator. In: "2019 IEEE Regional Symposium on Micro and Nanoelectronics, RSM 2019", |
2019 | Single-mode fiber coated with zinc oxide (ZnO) nanorods for H gas sensor applications. In: 2019 IEEE International Conference on Sensors and Nanotechnology, |
2018 | Design and optimization of a MEMS quartz mass sensor array for biosensing. In: 4th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2017, |
2018 | Design and simulation of electroacoustic sensor for exhaled breath analysis. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018, |
2018 | Performance analysis of SAW gas sensor based on ST-Cut quartz for breath analysis. In: 2018 IEEE International Conference on Semiconductor Electronics (ICSE), |
2017 | A PWM controller of a full bridge single-phase synchronous inverter for micro-grid system. In: 4th International Conference on Mathematical Applications in Engineering 2017 (ICMAE'17), |
2017 | Performance configuration of Raman-EDFA hybrid optical amplifier for WDM applications. In: International Technical Postgraduate Conference (Tech-Post) 2017, |
2015 | Dependence of preferred c-axis orientation on RF magnetron sputtering power for AZO/Si acoustic wave devices. In: 2015 Symposium on Design, Integration, Test and Packaging of MEMS and MOEMS (DTIP), |
2014 | Analysis of electromechanical coupling coefficient of surface acoustic wave resonator in ZnO piezoelectric thin film structure. In: 2014 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP), |
2014 | Piezoelectric characteristics of CMOS compatible AIN SAW resonators. In: 2014 Asia-Pacific Microwave Conference (APMC 2014), |
2013 | Comparative analysis of zinc oxide and aluminium doped ZnO for GHz CMOS MEMS surface acoustic wave resonator. In: 2013 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP 2013), |
2013 | Equivalent circuit modeling of two-port Al-doped Zinc Oxide CMOS SAW resonator using MATLAB™. In: 2013 IEEE International Conference on Circuits and Systems (ICCAS 2013), |
2013 | Finite element modeling of SAW resonator in CMOS technology for single and double interdigitated electrode (IDT) structure. In: 2013 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2013), |
2011 | Performance evaluation of MEMS piezoelectric inertial energy generator. In: 2011 IEEE Symposium Design, Test and Packaging of MEMS and MOEMS (DTIP 2011), |
2010 | Analysis of inductive powering harvesting circuit. In: 2010 IEEE International Conference on Semiconductor Electronics (ICSE), |
2010 | Simulation of a MEMS piezoelectric energy harvester. In: 2010 Symposium on Design Test Integration and Packaging of MEMS/MOEMS (DTIP 2010), |
2010 | Theoretical modeling and simulation of MEMS piezoelectric energy harvester. In: International Conference on Computer and Communication Engineering (ICCCE 2010), |
Book Section
2011 | Design of MEMS cantilever energy harvester. In: IIUM Press, ISBN: 9789674181536, pp. 57-66 |