Staff Directory
Academic Qualification
- Doktor Falsafah (Kejuruteraan Awam & Struktur) - Doctor of Philosophy, Universiti Kebangsaan Malaysia (UKM)
- MASTER OF ENGINEERING (CIVIL) - Masters Degree, Universiti Kebangsaan Malaysia (UKM)
- BACHELOR OF ENGINEERING WITH HONOURS (CIVIL AND STRUCTURAL ENGINEERING) - Bachelor Degree, Universiti Kebangsaan Malaysia (UKM)
- - MALAYSIAN UNIVERSITY ENGLISH TEST (MUET),
Norhidayu Binti Kasim (Assoc. Prof. Ir. Ts. Dr.)
Associate Professor
IIUM Gombak Campus
KULLIYYAH OF ENGINEERING
Expert Profile
PERSONAL
PARTICULAR
IC No :
821105-06-5942
Race :
Malay
Religion :
Islam
Nationality :
Malaysian
Marital Status :
Married
Health :
Excellent
Driving license : B2, D
Interest : Reading
and cooking
EDUCATION
Highest Education
Duration/Level :
2017 – Doctor of Philosophy
Field : Civil Engineering
(Geotechnics)
Institute/University : Universiti Kebangsaan Malaysia
Duration/Level :
January 2007 – November 2008 - Master Degree
Field : Civil Engineering
(Structural and Materials)
Institute/University : Universiti Kebangsaan Malaysia
Grade : CGPA 3.80
out of 4
Second Highest
Education
Duration/Level :
May 2002- Bachelor’s Degree
Field : Civil and Structural
Engineering
Institute/University : Universiti Kebangsaan Malaysia
Grade : CGPA 3.42 out of 4
Graduation : May 2006
Award : Maintained GPA 3.8
and above in 2004 until 2006-Dean’s List
Matriculation
Duration/Level :
Mac 2001- Mac 2002
Field : Science
Institute/University : Ministry of Education Matriculation Program
Malacca Matriculation College (KMM)
Grade :
CGPA 3.42
Graduation : Mac 2002
Secondary Education
Duration/Level : 2000/SPM
Field : Science
Institute/University : MRSM Kuala Terengganu
Grade : Grade 1 (Aggregate:
13)
Secondary Education
Duration/Level
: 1998/PMR
Field : Science
Institute/University : SMK Maran II
Grade : 7 A’s
Award : Anugerah Pelajar
Cemerlang PMR 1998
WORK EXPERIENCE
·
Civil Engineer at TLH Composite
Industries Sdn. Bhd.
(Working
Period: 3 July 2006 – 21 january 2007)
-
Prepared
Autocad Drawing, Costing, Bill of Quantity, Construction Programme and weekly
& monthly reports.
- Carried
out quality control & checking on-site work.
-
Supervised
work to ensure compliance with technical drawings & specifications.
·
Structural Design Engineer at Jurutera Perunding
Maju
(Working Period: 15 November
2006 – 9 February 2007)
- Assisted immediate superior in delegating work to
subordinates, acted as a work coordinator with sub-contractors and monitored
work compliance to the required specification.
- Participated in the design of super- and sub-structures
as well as retaining structures in projects.
- Attended to technical matters on site by developing
solutions to problems with the application of engineering concepts, practices
and techniques.
- Had close coordination with developers, architects,
quantity surveyors and contractors to ensure effective and efficient project
implementation.
- Addressed relevant information on project implementation
and prepared reports to the clients regularly.
- Liased with government authority to seek for approval on
project development proposals.
- Prepared contracts, drawings and specifications for
project tendering.
- Performed other duties that had been assigned from time
to time by the management.
·
Civil Engineer at Civil Engineering
Division, Structures and Bridges, Public Work Department (JKR) Headquarters
(Working
Period: 12 February 2007 – 18 January
2009)
-
Carried
out structural analysis and design work for projects.
-
Carried
out work as a checker on the designs that had been prepared by
engineers/designers related to the in-house designed projects.
-
Coordinated
and solved problems and arising issues brought up by the officers from other
disciplines that are involved in any particular projects.
-
Contributed
services as technical advisor to the client office, project supervisor, state
PWD and district PWD.
-
Reported
the design progress & development for the projects being assigned for, and
brought any problems and issues to the supervisor concerning the matters that
affect the smoothness of the work progress related to the design of the projects.
-
Prepared
the application for appointment of consultants according to the acquisition of
Consultant Service Manual, Treasury Circulation and related Treasury Directive
Document.
-
Reviewed
all structural drawing prepared by the consultants to ensure the inclusion of
all relevant particulars and fulfilled the requirements as stipulated in the
Specification and Need Statement for Conventional Design.
-
Reviewed
all structural drawing prepared for the Design & Build Projects to
ascertain all relevant particulars had been incorporated and fulfilled the
requirements as stipulated in the Specification and Need Statement for Conventional
Design.
-
Checked
and ensured that design alterations being carried out have fulfilled all desired
requirements and regulations.
-
Prepared
and coordinated project design progress reports and overall project reports to
ensure that the information on the project implementation scheduling is being
updated in the SKALA.
-
Planned
for the project coordination meetings as per required.
-
Assisted
in supervising subordinate officers/staffs at group levels.
-
Involved
in activities of different committees at Divisions, Branch and Department levels.
-
Participated
in formal & informal social activities.
-
Performed
other duties as directed from time to time by the Senior Director.
·
Part time lecturer at Computer System
Engineering and Communication Department, Faculty of Engineering, University
Putra Malaysia
(Working
Period: First Semester, 2009/2010)
-
Teaching Engineering
Mathematics
·
Civil Engineer at Research &
Development Division, Slope Engineering Department, Public Works Department of
Malaysia
(Working
Period: 19 January 2009 – 30 Mac
2015)
-
Developed rain-gauges
network at landslide prone areas located all over Malaysia including data
monitoring server at Slope Engineering Branch, PWD Malaysia.
-
Monitored the landslide movement using robotic total station at Section 44,
Simpang Pulai - Cameron Highland Road, Perak.
-
Studied on the debris flow controlling factors and triggering mechanisms in
Peninsular Malaysia.
-
Carried out collaboration study with Universiti Putra Malaysia and Ministry
of Information and Communication on the Using of Wireless Sensor Networks (WSN)
In Landslide Monitoring.
-
Involved in Collaboration studies with Universiti Sains Malaysia,
Universiti Tenaga Nasional, Malaysian Multimedia University, University of
Tokyo and Chiba University funded by Japan International Cooperation Agency
(JICA) entitled 'Research and Development For Reducing Geo-Hazard Damage In
Malaysia Caused by Landslide and Flooding.
-
Involved in the design team on Slope Mitigation Works At Section 46,
Simpang Pulai -Gua Musang Road (estimated cost RM25million).
·
Civil Engineer at Bridge Engineering
Design, Road Engineering Branch, Public
Works Department of Malaysia
(Working Period: 1 April 2015 – 7 December 2022)
-
Carried
out bridge engineering analysis and design work of project.
-
Carried
out work as a checker for bridge designs that had been prepared by
engineers/designers related to the in-house projects.
-
Coordinated
and solved problems and arising issues raised by the officers from other
disciplines that are involved in any particular projects.
-
Contributed
services as technical advisor to the client office, project supervisor, state
PWD and District PWD.
-
Reported
project design progress & development for the projects being responsible for
and brought any problems and issues to the supervisor in relation to the
matters that affect the smoothness of the work progress for the design of the projects.
-
Prepared
the application for appointment of consultants according to the acquisition of
Consultant Service Manual, Treasury Circulation and related Treasury Directive
Documents.
-
Reviewed
all structural drawing prepared by the consultant to ensure the inclusion of
all relevant particulars and fulfilled the requirements as stipulated in the
Specification and Need Statement for Conventional Design and Design & Build
Projects.
-
Checked
and ensured that design alterations being carried out have fulfilled the desired
requirements and regulations.
-
Prepared
and coordinated project design progress reports and overall project reports to
ensure that the information on the project implementation scheduling is being
updated in the SKALA.
- Assistant Professor at Department of Civil Engineering, Kulliyyah of Civil Engineering, International Islamic University Malaysia (IIUM) (Working Period: 12 December 2018 - present)
10. Nur Fatihah Binti Anuar (2021) Correlation of SPT N-Value and CBR Data for Granular Soil
Abdul Muaz Bin Abu Mansor Maturidi (Graduated) - Development of Empirical Rainfall Thresholds for Landslide Forecasting in Peninsular Malaysia
Nurain Asrin Binti Saparudin (ongoing) - Stabilisation of Peat and Clayey Sand by Using Waste Rubber Tyre- Farah Salwana Binti Kharuddin (ongoing) - Investigation on the Compatibility of Waste Cooking Oil (WCO) for Binder Modification and its Performance in Porous Asphalt Mixture
1. Derivation of classification for flexible taxiway pavement profile using shear wave velocity parameter (IRAG IIUM). RM20,000.00. Co-researcher. 2018 – 2021 (completed).
2. Study on Rainfall Intensity Duration Threshold Landslide Occurrence in Peninsular Malaysia. (FRGS – RACER KPT). RM 39,700. Principle Investigator. 2019 – 2022 (completed).
3. Present Investigation on the Compatibility of Waste Cooking for Binder Modification and its Performance in Porous Asphalt Mixture. (FRGS – KPT). RM 79,000. Co-researcher. 2019 – present.
Norhidayu K., Muhklisin M., Kamarudin A. T, Anuar K. 2016. Triggering Mechanism and Characteristics of Debris Flow in Peninsular Malaysia. American Journal of Engineering Research, Vol 5, Issue 4, 112-119.
Abdul Muaz Abu Mansor Maturidi, Norhidayu Kasim, Kamarudin Abu Taib, Wan Nur Aifa Wan Azahar, Husna Ahmad Tajuddin (2020) Empirically Based Rainfall Threshold for Landslides Occurrence in Cameron Highlands, Civil Engineering and Architecture 8(6): 1481-1490, 2020 DOI: 10.13189/cea.2020.080629 (SCOPUS & Q2)
Abdul Muaz Abu Mansor Maturidi, Norhidayu Kasim, Kamarudin Abu Taib, Wan Nur Aifa Wan Azahar, and Husna Binti Ahmad Tajuddin (2021) Empirically Based Rainfall Threshold for Landslides Occurrence in Peninsular Malaysia. KSCE Journal of Civil Engineering. pp 1-15, ISSN1226-7988 (SCOPUS & Q2)
Abdul Muaz Abu Mansor Maturidi, Norhidayu Kasim, Kamarudin Abu Taib, Wan Nur Aifa Wan Azahar (2021) Rainfall-Induced Landslide Thresholds Development by Considering Different Rainfall Parameters: A Review. Journal of Ecological Engineering. 22 (10) pp 85-97 (SCOPUS & Q3)
Wan Nur Aifa Wan Azahar, Norhidayu Kasim, Norfarah Nadia Ismail, Ramadhansyah Putra Jaya, Mohd Rosli Hainin, Khairil Azman Masri, Mastura Bujang, Zaid Hazim Al-Saffar (2021) Behaviour of Hot Mix Asphalt Incorporating Untreated and Treated Waste Cooking Oil. International Journal of Pavement Research and Technology (2021) (SCOPUS & Q1)
Farah Salwana Kharuddin, Wan Nur Aifa Wan Azahar, Norhidayu Kasim, Nur Khairiyah Basri, Ramez Al-Ezzi Abduljalil Al-Mansob, Nurul Sakinah Engliman, Nurul Hidayah Mohd Kamaruddin (2021) Physical and Mechanical Evaluation of Porous Asphalt Incorporated with Untreated and Treated Waste Cooking Oil. Malaysian Construction Research Journal (MCRJ). 14 (No. 3) (2021) eISSN No.: 2590 – 4140 (SCOPUS & Q4)
S. H. Mat Shukor, S. B. Abdul Hamid, N. Kasim, Z. Ab. Moin (2021) Slope Inspection System: Using image processed by machine learning algorithm to determine risk of slope failure. International Journal of Engineering Technology and Sciences. Vol.7 (2). ISSN: 2462-1269
Nurain Asrin Saparudin, Norhidayu Kasim, Kamarudin Abu Taib, Wan Nur Aifa Wan Azahar , Nur Aisyah Kasim , Maisarah Ali (2022) Improvement Of Problematic Soil Using Crumb Rubber Tyre. IIUM Engineering Journal, Vol. 23, No. 2 (SCOPUS & Q2)
PUBLICATION (POPULAR WRITING / ARTICLE)
Berita Harian (24.9.21, page 12) - Waspada risiko bencana aliran puing, elak nyawa jadi taruhan
CODE OF PRACTICE (BOOK)
NTJ 29/2019 Manual for Bridge Approach Differential Settlement improvement (JKR 20400-0224-19)
REVIEWER (JOURNAL MANUSCRIPT)
1. IIUM Engineering Journal (Scopus & Q3)
2. Jurnal Teknologi (Scopus & Q2)
3. Jurnal Kejuruteraan (UKM Engineering Journal)
4. 6th International Conference on Civil and Environmental Engineering for Sustainability (IConCEES 2021)
5. Malaysian Construction Research Journal (MCRJ) (Scopus & Q4)
6. Physics and Chemistry of the Earth (Scopus & Q2)
REVIEWER (PROCEEDING/BOOK SERIES MANUSCIPT)
1. 6th International Conference on Civil and Environmental Engineering for Sustainability, 15-16 November 2021, Online
2. Awam International Conference Civil Engineering (AICCE’22), Sustainable and resiliency : Re- Engineering the future, 15-17 February 2022, Pulau Pinang
EXTERNAL EXAMINER
1. Final Year Project Examiner, SEGi University - Tunnel settlement prediction using contraction ratio method in Kenny Hill formation, Hassan Amadeldin Hassan, 4 May 2021
CONSULTANCY
1. Consultancy service on the preparation of the layout drawing for the setting up of a clinic - Klinik Dr Miss – RM500, September 2019
2. Consultancy service on the preparation of the layout drawing for the setting up of a clinic - Poliklinik Amani – RM500, September 2020
3. Renovation work - Klinik Afiyah Maran (Hidracare Sdn. Bhd) RM40,000, December 2020 – Mac 2021
4. Consultancy service on the preparation of the layout drawing for the setting up of a clinic - Klinik Dr. Raveen – RM600, September 2021
5. Consultancy service on the preparation of the layout drawing for the setting up of a clinic - Klinik Mansi – RM600, September 2021
6. Consultancy service on the preparation of the layout drawing for the setting up of a clinic - Klinik Bakti – RM600, November 2021
7. Consultancy service on the preparation of the layout drawing for the setting up of a clinic - Klinik Dr. Fillah – RM1000, January 2022
8. Renovation work – Afiyah MediSpa (Hidracare Sdn. Bhd) RM20,000.00 March 2022 – May 2022
MAJOR PROJECT CONTRIBUTION
1. Longest Rock shed in Malaysia in Section 46, Jalan Simpang Pulai – Gua Musang, Cameron Highland, 2014
2. Menggantikan Jambatan Sg Maran FT002/284/80, Maran, Pahang
3. Projek Menggantikan Jambatan Sedia Ada Di FT007/025/90 (Sg. Sanglang), Daerah Kubang Pasu, Kedah Darul Aman
4. Cadangan Pembinaan Jalan Dari Kuala Temoyong Ke Teluk Baru Dan Pantai Tengah, Langkawi, Kedah Darul Aman
5. Rekabentuk Terperinci Rancangan Tebatan Banjir Sungai Pendang, Kedah
6. Pembinaan Kompleks Bangunan Gen Biji Benih Mardi Serdang
SPEKEYNOTE / PLENARY SPEECH
- Pembangunan Nilai Ambang Hujan Tanah Runtuh, Bengkel Cawangan Kejuruteraan Cerun, Ibu Pejabat JKR Malaysia 1-2 November 2021
- Debris Flow Overview in Malaysia, Mesyuarat Penyelarasan Ahli Jawatankuasa Antara Agensi Kerajaan Bagi Pengurusan Cerun (ICSM) Kali Ke-14, Cawangan Kejuruteraan Cerun, Ibu Pejabat JKR Malaysia 10 November 2021
1. Route to Professional Engineer – UKM orientation week for new intake. September 2018
MARKETING PROGRAM
1. Introduction to Civil Engineering Program – Visit from Sekolah Menengah Chedong Jaya students, 28 August 2019
2. Kulliyyah of Engineering Professional Engineer (PE) Task Force,25 Jan 2021 - 23 Nov 2020
3. Kulliyyah of Engineering Promotion Committee Meeting, 18 Jan 2021
PROFESSIONAL JURY AND ADVISOR
1. Jury, Tower Bridge Competition, Kulliyyah of Engineering, IIUM, 13 April 2019
2. Judge KERICE 2019, Kulliyyah of Engineering Research Innovation and Commercialization Exhibition 2019, 18 September 2019
3. Judge KERICE 2020, Kulliyyah of Engineering Research Innovation and Commercialization Exhibition 2019, 8 December 2020
ADDITIONAL RESPONSIBILITIES (INTERNATIONAL AND NATIONAL LEVEL)
1. Committee Member Pelan Induk Cerun Negara (PICN): Kumpulan Kerja 5 (Wg5) – Kajian Dan Penyelidikan
2. Committee Member Road Engineering Association of Malaysia (REAM) Education Fund Committee
COMMUNITY SERVICE
1. Kulliyyah of Engineering Projects for Kampung Orang Asli Community, 11 February 2019
2. Structural Forensic Investigation of Sekolah Kebangsaan (L) Jalan Batu (SKJB), 21 July 2019
3. River of Life (ROL) river work committee, September 2020 until present
SPECIAL SKILLS
Able to learn new
knowledge and apply it quickly and effectively.
Knowledgeable in
technology and health care.
Hard working, detail
oriented, able to multi-task.
Excellent communication
and presentation skills.
COMPUTER AND
ENGINEERING SOFTWARE SKILLS
Microsoft Word, Microsoft Excel, Microsoft Excess,
Microsoft Power Point,
Microsoft Project, Autocad, Esteem, Staad Pro, Etabs,
Safe, Prokon, Matlab, Orion, Midas, Geoslopes and etc.
LANGUAGE COMPETENCY
Language Spoken : Bahasa Melayu, English, Chinese
(Mandarin)
Language Written : Bahasa Melayu, English, Chinese
(Mandarin)
REFEREES
Ir. Dr. Anuar bin Kasa
Senior
Lecturer
Department of Civil
& Structural Engineering,
Faculty of Engineering,
Universiti
Kebangsaan Malaysia,
43600 Bangi, Selangor Darul Ehsan
e-mel : anuar@vlsi.eng.ukm.my
Relationship: Lecturer & Thesis Supervisor
Abdullah
Senior Director
Center of Excellence for Engineering and Technology
(CREATE)
Public Works Department of Malaysia,
Jalan Kemus, Simpang Empat,
78000 Alor Gajah,
Melaka, Malaysia.
Email: hassandi@jkr.gov.my
Area of Specialisation
- Engineering Tech ~ Engineering And Technology ~ Civil Engineering ~ Structures - STRUCTURAL , BRIDGE
- Engineering Tech ~ Engineering And Technology ~ Civil Engineering ~ Foundation - SHALLOW FOUNDATION, DEEP FOUNDATION
- Engineering Tech ~ Engineering And Technology ~ Civil Engineering ~ Geology and Rock - ENGINEERING GEOLOGY
- Engineering Tech ~ Engineering And Technology ~ Civil Engineering ~ Geotechniques - SLOPE ENGINEERING- SHALLOW LANDSLIDE INCLUDING DEBRIS FLOW, DEEP SEATED LANDSLIDE.
Professional Membership
- 2015 - 2042: Member of Profesional Body / Association: (Professional Engineer), Board of Engineers Malaysia
- 2021: Member of Profesional Body / Association: (Professional Technologist), Malaysia Board of Technologists (MBOT)
Teaching Responsibilities
ADVANCED GEOTECHNICAL ENGINEERING | 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 |
CIVIL ENGINEERING DRAWING | 2018/2019 |
CIVIL ENGINEERING LAB III | 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 |
CONSTRUCTION PROJECT MANAGEMENT | 2020/2021 2019/2020 2018/2019 |
ELECTIVE I-CIVIL ENGINEERING DESIGN LAB | 2023/2024 2022/2023 |
FINAL YEAR PROJECT 1 | 2024/2025 |
FINAL YEAR PROJECT I | 2024/2025 2023/2024 2022/2023 2021/2022 2020/2021 |
FINAL YEAR PROJECT II | 2021/2022 2020/2021 |
FOUNDATION ENGINEERING | 2024/2025 2023/2024 |
GEOTECHNICAL ENGINEERING | 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 |
INFRASTRUCTURE PLANNING AND DESIGN | 2024/2025 2023/2024 |
INTEGRATED DESIGN PROJECT | 2024/2025 2023/2024 |
INTERGRATED DESIGN PROJECT | 2024/2025 2023/2024 2022/2023 |
SEMINAR | 2021/2022 |
Supervision
Crystallinity Degree Modification In Solving Compatibility Performance Of Desiccated Coconut Residue (Dcr) In Hot Mix Asphalt (Hma).
Ph.D
In Progress
Co-supervisor
|
Investigation On The Compatibility Of Waste Cooking Oil (Wco) For Binder Modification And Its Performance In Porous Asphalt Mixture.
Master
Completed
2023
Co-supervisor
|
Development Of Empirical Rainfall Thresholds For Landslide Forecasting In Peninsular Malaysia.
Master
Completed
2021
Main Supervisor
|
Development Of Rainfall Intensity - Duration Threshold Using Artificial Neural Network.
Master
In Progress
Main Supervisor
|
Stabilisation Of Peat And Clayey Sand By Using Waste Rubber Tyre.
Master
In Progress
Main Supervisor
|
Research Projects
Completed
2023 - 2023 | Geotechnical Site Investigation for a Proposed Construction of Double-Storey Houses in Maran, Pahang |
2019 - 2022 | INVESTIGATION ON THE COMPATIBILITY OF WASTE COOKING OIL (WCO) FOR BINDER MODIFICATION AND ITS PERFORMANCE IN POROUS ASPHALT MIXTURE |
2019 - 2022 | Study on Rainfall Intensity Duration Threshold Induced Landslides Occurrence in Peninsular Malaysia |
2018 - 2022 | Derivation of classification for flexible taxiway pavement profile using shear wave velocity parameter |
On-Going
2023 - Present | Crystallinity Degree Modification in Solving Compatibility Performance of Desiccated Coconut Residue (DCR) in Hot Mix Asphalt (HMA) |
Publications
Article
Conference or Workshop Item
2021 | Correlation between slump, VeBe and compaction factor of concrete containing shredded PET bottles, manufactured sand (M-sand) and river sand as fine aggregate. In: 5th International Conference on Advanced Technology and Applied Sciences and 6th Malaysia Japan Joint International Conference (ICETAS MJJIC 2020), |
2021 | Debris Flow Numerical Simulation Model Comparison with Field Events in Kuala Kubu Baru and Lentang, Malaysia. In: The 5th International Conference on Advanced Technology and Applied Sciences (ICATAS) 2020, |
2021 | Rainfall-induced hydraulic properties for unsaturated soil in Klang valley. In: 12th International Conference on Geotechnical Engineering in Tropical Regions: Fostering Future Through Geotechnical, Sustainable Engineering and Technology, GEOTROPIKA 2021 and 2nd International Conference on Highway and Transportation Engineering: Empow, |
2020 | Assessment ranking for green pavement material elements. In: International Conference on Technology, Engineering and Sciences (ICTES) 2020, |
2020 | Correlation between slump, VeBe and compaction factor of concrete containing shredded PET bottles, manufactured sand (M-sand) and river sand as fine aggregate. In: 5th International Conference on Advanced Technology and Applied Sciences and 6th Malaysia Japan Joint International Conference (ICETAS MJJIC 2020), |
2020 | Higher modes and superposed mode behavior for flexible pavement layer system. In: 6th International Conference on Advanced Engineering and Technology (ICAET 2019), |
2020 | Rainfall-induced landslides in Cameron Highland area, Malaysia. In: International Conference on Technology, Engineering and Sciences (ICTES) 2020, |
Book Section
2020 | Investigation on compatibility property between aggregates and bitumen modified with untreated and treated waste cooking oil. In: Springer International Publishing, ISBN: 978-3-030-32815-3, pp. 933-942 |
2020 | Rainfall intensity (I)–duration (D) induced debris flow occurrences in Peninsular Malaysia. In: Springer, Cham, ISBN: 978-3-030-32815-3, pp. 897-903 |
2020 | Reusable concrete debris as aggregate replacement on the properties of green concrete. In: Springer International Publishing, ISBN: 978-3-030-32815-3, pp. 869-878 |
2019 | Determination of soil bearing capacity and profile using CAP-SASW method at Western Malaysian Peninsular. In: Springer Nature, ISBN: 978-3-030-32815-3, pp. 855-867 |